today's update.. more files and robust file storage
This commit is contained in:
timothyafolami
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -0,0 +1,138 @@
|
|||||||
|
How to change engine oil
|
||||||
|
and filter on TOYOTA
|
||||||
|
Corolla Verso (AR10) –
|
||||||
|
replacement guide
|
||||||
|
SIMILAR VIDEO TUTORIAL
|
||||||
|
This video shows the replacement procedure of a similar car part on another vehicle
|
||||||
|
CLUB.AUTODOC.CO.UK 1–10
|
||||||
|
This replacement procedure can be used for:
|
||||||
|
TOYOTA Corolla Verso (AR10) 1.6 (ZNR10_), TOYOTA Corolla Verso (AR10) 1.8
|
||||||
|
(ZNR11_), TOYOTA Corolla Verso (AR10) 1.5, TOYOTA Corolla Verso (AR10) 1.8
|
||||||
|
The steps may slightly vary depending on the car design.
|
||||||
|
Important!
|
||||||
|
This tutorial was created based on the replacement procedure for a similar car part
|
||||||
|
on: TOYOTA Aygo (AB10) 1
|
||||||
|
Buy tools
|
||||||
|
CLUB.AUTODOC.CO.UK 2–10
|
||||||
|
REPLACEMENT: ENGINE OIL AND FILTER – TOYOTA
|
||||||
|
COROLLA VERSO (AR10). LIST OF THE TOOLS YOU'LL
|
||||||
|
NEED:
|
||||||
|
All-purpose cleaning spray
|
||||||
|
Oil filter cup socket 76/14-F
|
||||||
|
Impact socket №15
|
||||||
|
Ratchet wrench
|
||||||
|
Torque wrench
|
||||||
|
Oil drain pan
|
||||||
|
Funnel
|
||||||
|
Fender cover
|
||||||
|
CARRY OUT REPLACEMENT IN THE FOLLOWING ORDER:
|
||||||
|
1
|
||||||
|
Open the hood.
|
||||||
|
2
|
||||||
|
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
|
||||||
|
3
|
||||||
|
Unscrew the oil filler plug.
|
||||||
|
4
|
||||||
|
Lift the car using a jack or place it over an inspection pit.
|
||||||
|
CLUB.AUTODOC.CO.UK 3–10
|
||||||
|
Replace the oil filter every time when changing motor oil.
|
||||||
|
Please note: all work on the car – TOYOTA Corolla Verso (AR10) – should be
|
||||||
|
done with the engine switched off.
|
||||||
|
Wear gloves to prevent contact with hot liquid.
|
||||||
|
The vehicle must be on even keel, and if it is at an angle, the drain plug must be
|
||||||
|
at the lowest point.
|
||||||
|
All work should be done with the engine stopped.
|
||||||
|
AUTODOC recommends:
|
||||||
|
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Tip from
|
||||||
|
AUTODOC experts:
|
||||||
|
5
|
||||||
|
Put a waste oil container with at least 4 l capacity under the drainage hole.
|
||||||
|
6
|
||||||
|
Unscrew the drain plug. Use a drive socket #15. Use a ratchet wrench.
|
||||||
|
7
|
||||||
|
Drain the used oil.
|
||||||
|
CLUB.AUTODOC.CO.UK 4–10
|
||||||
|
Caution! The oil may be hot.
|
||||||
|
Wait until the oil has completely drained from the drainage hole.
|
||||||
|
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Tip from
|
||||||
|
AUTODOC:
|
||||||
|
8 Move the container under the oil filter.
|
||||||
|
9
|
||||||
|
Unscrew the oil filter. Use the 76/14-F socket.
|
||||||
|
10
|
||||||
|
Prepare a container for the old oil filter. Put the old oil filter in the container.
|
||||||
|
11
|
||||||
|
Clean the oil filter seat.
|
||||||
|
CLUB.AUTODOC.CO.UK 5–10
|
||||||
|
Move up the container. The oil starts to drain out of the drainage hole
|
||||||
|
immediately after you have removed the oil filter.
|
||||||
|
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Tip:
|
||||||
|
12
|
||||||
|
Lubricate the rubber seal of the new filter with a little amount of fresh oil.
|
||||||
|
13
|
||||||
|
Screw the new filter into its place. Use the 76/14-F socket. Use a torque wrench. Tighten it to 23 nm torque.
|
||||||
|
14
|
||||||
|
Clean the area of the oil pan drainage hole.
|
||||||
|
15
|
||||||
|
Screw in the new drainage plug and tighten it. Use a drive socket #15. Use a torque wrench. Tighten it to 27 nm
|
||||||
|
torque.
|
||||||
|
CLUB.AUTODOC.CO.UK 6–10
|
||||||
|
16
|
||||||
|
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
|
||||||
|
17
|
||||||
|
Lower the car.
|
||||||
|
18
|
||||||
|
Remove the oil filler cap. Insert the funnel.
|
||||||
|
19
|
||||||
|
Pour oil into the engine through the filler. Required amount of oil: 3.6 L.
|
||||||
|
CLUB.AUTODOC.CO.UK 7–10
|
||||||
|
Use the oil recommended by the manufacturer.
|
||||||
|
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Professionals recommend:
|
||||||
|
20
|
||||||
|
Check the oil level using the dipstick. Top up oil if necessary.
|
||||||
|
21
|
||||||
|
Tighten the oil filler cap.
|
||||||
|
22
|
||||||
|
Run the engine for a few minutes. After the oil pressure warning light goes out, stop the engine.
|
||||||
|
23
|
||||||
|
Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary.
|
||||||
|
CLUB.AUTODOC.CO.UK 8–10
|
||||||
|
The oil level should be between the Min and Max marks.
|
||||||
|
Please note!
|
||||||
|
24
|
||||||
|
Remove the fender protection cover.
|
||||||
|
25
|
||||||
|
Close the hood.
|
||||||
|
VIEW MORE TUTORIALS
|
||||||
|
CLUB.AUTODOC.CO.UK 9–10
|
||||||
|
The oil level should be between the Min and Max marks.
|
||||||
|
Make sure that the oil filler cap is properly tightened.
|
||||||
|
Check the threaded plug of the drainage hole and the oil filter seal for tightness.
|
||||||
|
If necessary, carefully tighten them up.
|
||||||
|
Note that oil pressure warning light, which indicates insufficient pressure in the
|
||||||
|
lubrication system, may be on for a longer time than usual. After a few seconds,
|
||||||
|
the oil will fill all the channels, and the light will go out.
|
||||||
|
To protect the environment from pollution, be sure to dispose of the used filters
|
||||||
|
at special collection points.
|
||||||
|
WELL DONE!
|
||||||
|
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). AUTODOC
|
||||||
|
recommends:
|
||||||
|
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). AUTODOC
|
||||||
|
experts recommend:
|
||||||
|
AUTODOC — TOP QUALITY AND AFFORDABLE CAR
|
||||||
|
PARTS ONLINE
|
||||||
|
A GREAT SELECTION OF SPARE PARTS FOR YOUR CAR
|
||||||
|
OIL FILTER: A WIDE SELECTION
|
||||||
|
The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable
|
||||||
|
for any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
|
||||||
|
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot
|
||||||
|
replace advice from specialists.
|
||||||
|
AUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe
|
||||||
|
the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of
|
||||||
|
road safety.
|
||||||
|
© Copyright 2022 – All the contents of this website, in particular texts, photographs and graphics, are protected by copyright. All rights, including
|
||||||
|
reproduction, publication, editing and translation rights, are reserved by AUTODOC GmbH.
|
||||||
|
CLUB.AUTODOC.CO.UK 10–10
|
||||||
|
DISCLAIMER:
|
||||||
|
AUTODOC MOBILE APP: GREAT DEALS AND CONVENIENT
|
||||||
|
SHOPPING
|
||||||
@@ -0,0 +1,156 @@
|
|||||||
|
How to change front
|
||||||
|
brake pads on TOYOTA
|
||||||
|
Corolla IX Hatchback
|
||||||
|
(E120) – replacement
|
||||||
|
guide
|
||||||
|
SIMILAR VIDEO TUTORIAL
|
||||||
|
This video shows the replacement procedure of a similar car part on another vehicle
|
||||||
|
CLUB.AUTODOC.CO.UK 1–11
|
||||||
|
This replacement procedure can be used for:
|
||||||
|
TOYOTA Corolla IX Hatchback (E120) 1.6 VVT-i (ZZE121_), TOYOTA Corolla IX
|
||||||
|
Hatchback (E120) 1.8 VVTi (ZZE122), TOYOTA Corolla IX Hatchback (E120) 1.8 4WD, TOYOTA Corolla IX Hatchback (E120) 1.8 (ZZE122_), TOYOTA Corolla IX Hatchback
|
||||||
|
(E120) 1.5 VVT-i (NZE121_)
|
||||||
|
The steps may slightly vary depending on the car design.
|
||||||
|
Important!
|
||||||
|
This tutorial was created based on the replacement procedure for a similar car part
|
||||||
|
on: TOYOTA Prius II Liftback (XW20) 1.5 Hybrid (NHW2_)
|
||||||
|
Buy tools
|
||||||
|
CLUB.AUTODOC.CO.UK 2–11
|
||||||
|
REPLACEMENT: BRAKE PADS – TOYOTA COROLLA IX
|
||||||
|
HATCHBACK (E120). TOOLS YOU NEED:
|
||||||
|
Wire brush
|
||||||
|
WD-40 spray
|
||||||
|
Brake cleaner
|
||||||
|
Anti-squeal paste
|
||||||
|
Copper grease
|
||||||
|
Combination spanner #13
|
||||||
|
Combination spanner #17
|
||||||
|
Drive socket # 13
|
||||||
|
Wheel impact socket #21
|
||||||
|
Brake caliper wind back tool
|
||||||
|
Torque wrench
|
||||||
|
Crow bar
|
||||||
|
Wheel chock
|
||||||
|
REPLACEMENT: BRAKE PADS – TOYOTA COROLLA IX HATCHBACK
|
||||||
|
(E120). USE THE FOLLOWING PROCEDURE:
|
||||||
|
1
|
||||||
|
Open the bonnet. Unscrew the brake fluid reservoir cap.
|
||||||
|
2
|
||||||
|
Secure the wheels with chocks.
|
||||||
|
3
|
||||||
|
Loosen the wheel mounting bolts. Use wheel impact socket #21.
|
||||||
|
4
|
||||||
|
Raise the front of the car and secure on supports.
|
||||||
|
CLUB.AUTODOC.CO.UK 3–11
|
||||||
|
Perform the replacement of brake pads in complete set for each axis. This
|
||||||
|
provides effective braking.
|
||||||
|
The replacement procedure is identical for all brake pads on the same axle.
|
||||||
|
All work should be done with the engine stopped.
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||||
|
recommends:
|
||||||
|
5
|
||||||
|
Unscrew the wheel bolts.
|
||||||
|
6
|
||||||
|
Remove the wheel.
|
||||||
|
7
|
||||||
|
Spread the brake pads. Use a crowbar.
|
||||||
|
8
|
||||||
|
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
|
||||||
|
CLUB.AUTODOC.CO.UK 4–11
|
||||||
|
To avoid injury, hold up the wheel when unscrewing the bolts.
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Tip from
|
||||||
|
AUTODOC:
|
||||||
|
9
|
||||||
|
Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #17.
|
||||||
|
10
|
||||||
|
Remove the brake caliper.
|
||||||
|
CLUB.AUTODOC.CO.UK 5–11
|
||||||
|
Tie the caliper to the suspension or to the body with a wire without disconnecting
|
||||||
|
from the brake hose to prevent depressurization of the brake system.
|
||||||
|
Make sure that the brake caliper is not hanging on the brake hose.
|
||||||
|
Don't press the brake pedal after the brake caliper has been removed. As a result,
|
||||||
|
the piston can fall out from the brake cylinder, and brake fluid leakage and
|
||||||
|
depressurization of the system may occur.
|
||||||
|
Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Tip:
|
||||||
|
11
|
||||||
|
Remove the brake pads. Use a crowbar.
|
||||||
|
12
|
||||||
|
Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use WD-40 spray.
|
||||||
|
13
|
||||||
|
Treat the brake caliper piston. Use a brake cleaner.
|
||||||
|
CLUB.AUTODOC.CO.UK 6–11
|
||||||
|
Measure the brake disc thickness. Upon reaching the wear limit the part must be
|
||||||
|
replaced.
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). After applying
|
||||||
|
the spray, wait a few minutes.
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||||
|
experts recommend:
|
||||||
|
AUTODOC recommends:
|
||||||
|
14
|
||||||
|
Press in the brake caliper piston. Use brake caliper wind back tool.
|
||||||
|
15
|
||||||
|
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use antisqueal paste.
|
||||||
|
16
|
||||||
|
Install new brake pads.
|
||||||
|
CLUB.AUTODOC.CO.UK 7–11
|
||||||
|
Make sure the disc surface is clean before installing the pads.
|
||||||
|
Make sure the pads are installed with linings facing the disc.
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Tip from
|
||||||
|
AUTODOC experts:
|
||||||
|
AUTODOC recommends:
|
||||||
|
17
|
||||||
|
Install the brake caliper and fix it. Use a drive socket #13. Use a torque wrench. Tighten it to 35 Nm torque.
|
||||||
|
18
|
||||||
|
Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
|
||||||
|
19
|
||||||
|
Clean the brake disk surface. Use a brake cleaner.
|
||||||
|
20
|
||||||
|
Install the wheel.
|
||||||
|
CLUB.AUTODOC.CO.UK 8–11
|
||||||
|
After applying the spray, wait a few minutes.
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||||
|
experts recommend:
|
||||||
|
21
|
||||||
|
Screw in the wheel bolts. Use wheel impact socket #21.
|
||||||
|
22
|
||||||
|
Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 103 Nm
|
||||||
|
torque.
|
||||||
|
23
|
||||||
|
Remove the jacks and chocks.
|
||||||
|
CLUB.AUTODOC.CO.UK 9–11
|
||||||
|
Important! Hold the wheel while screwing in the fastening bolts. TOYOTA Corolla
|
||||||
|
IX Hatchback (E120)
|
||||||
|
Important! Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Check the brake fluid level in the reservoir and top up if necessary.
|
||||||
|
AUTODOC recommends:
|
||||||
|
AUTODOC recommends:
|
||||||
|
24
|
||||||
|
Tighten the brake fluid reservoir cap.
|
||||||
|
25
|
||||||
|
Close the hood.
|
||||||
|
VIEW MORE TUTORIALS
|
||||||
|
CLUB.AUTODOC.CO.UK 10–11
|
||||||
|
TOYOTA Corolla IX Hatchback (E120) – Press the brake pedal several times with
|
||||||
|
the engine shut down until you feel the resistance built up.
|
||||||
|
Slow down smoothly for first 150-200 km after the brake pads replacement. Avoid unneccessary and sharp braking to a stop.
|
||||||
|
WELL DONE!
|
||||||
|
AUTODOC recommends:
|
||||||
|
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||||
|
recommends:
|
||||||
|
AUTODOC — TOP QUALITY AND AFFORDABLE CAR
|
||||||
|
PARTS ONLINE
|
||||||
|
A GREAT SELECTION OF SPARE PARTS FOR YOUR CAR
|
||||||
|
BRAKE PADS: A WIDE SELECTION
|
||||||
|
The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable
|
||||||
|
for any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
|
||||||
|
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot
|
||||||
|
replace advice from specialists.
|
||||||
|
AUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe
|
||||||
|
the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of
|
||||||
|
road safety.
|
||||||
|
© Copyright 2022 – All the contents of this website, in particular texts, photographs and graphics, are protected by copyright. All rights, including
|
||||||
|
reproduction, publication, editing and translation rights, are reserved by AUTODOC GmbH.
|
||||||
|
CLUB.AUTODOC.CO.UK 11–11
|
||||||
|
DISCLAIMER:
|
||||||
|
AUTODOC MOBILE APP: GREAT DEALS AND CONVENIENT
|
||||||
|
SHOPPING
|
||||||
Binary file not shown.
Binary file not shown.
+526
-156
File diff suppressed because one or more lines are too long
+4
-1
@@ -7,4 +7,7 @@ scikit-learn
|
|||||||
langchain-community
|
langchain-community
|
||||||
langchain-openai
|
langchain-openai
|
||||||
langchain-huggingface
|
langchain-huggingface
|
||||||
langchain-text-splitters
|
langchain-text-splitters
|
||||||
|
unstructured[all-docs]
|
||||||
|
docx2txt
|
||||||
|
docx
|
||||||
Binary file not shown.
Binary file not shown.
Reference in New Issue
Block a user