today's update.. more files and robust file storage
This commit is contained in:
timothyafolami
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -0,0 +1,138 @@
|
||||
How to change engine oil
|
||||
and filter on TOYOTA
|
||||
Corolla Verso (AR10) –
|
||||
replacement guide
|
||||
SIMILAR VIDEO TUTORIAL
|
||||
This video shows the replacement procedure of a similar car part on another vehicle
|
||||
CLUB.AUTODOC.CO.UK 1–10
|
||||
This replacement procedure can be used for:
|
||||
TOYOTA Corolla Verso (AR10) 1.6 (ZNR10_), TOYOTA Corolla Verso (AR10) 1.8
|
||||
(ZNR11_), TOYOTA Corolla Verso (AR10) 1.5, TOYOTA Corolla Verso (AR10) 1.8
|
||||
The steps may slightly vary depending on the car design.
|
||||
Important!
|
||||
This tutorial was created based on the replacement procedure for a similar car part
|
||||
on: TOYOTA Aygo (AB10) 1
|
||||
Buy tools
|
||||
CLUB.AUTODOC.CO.UK 2–10
|
||||
REPLACEMENT: ENGINE OIL AND FILTER – TOYOTA
|
||||
COROLLA VERSO (AR10). LIST OF THE TOOLS YOU'LL
|
||||
NEED:
|
||||
All-purpose cleaning spray
|
||||
Oil filter cup socket 76/14-F
|
||||
Impact socket №15
|
||||
Ratchet wrench
|
||||
Torque wrench
|
||||
Oil drain pan
|
||||
Funnel
|
||||
Fender cover
|
||||
CARRY OUT REPLACEMENT IN THE FOLLOWING ORDER:
|
||||
1
|
||||
Open the hood.
|
||||
2
|
||||
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
|
||||
3
|
||||
Unscrew the oil filler plug.
|
||||
4
|
||||
Lift the car using a jack or place it over an inspection pit.
|
||||
CLUB.AUTODOC.CO.UK 3–10
|
||||
Replace the oil filter every time when changing motor oil.
|
||||
Please note: all work on the car – TOYOTA Corolla Verso (AR10) – should be
|
||||
done with the engine switched off.
|
||||
Wear gloves to prevent contact with hot liquid.
|
||||
The vehicle must be on even keel, and if it is at an angle, the drain plug must be
|
||||
at the lowest point.
|
||||
All work should be done with the engine stopped.
|
||||
AUTODOC recommends:
|
||||
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Tip from
|
||||
AUTODOC experts:
|
||||
5
|
||||
Put a waste oil container with at least 4 l capacity under the drainage hole.
|
||||
6
|
||||
Unscrew the drain plug. Use a drive socket #15. Use a ratchet wrench.
|
||||
7
|
||||
Drain the used oil.
|
||||
CLUB.AUTODOC.CO.UK 4–10
|
||||
Caution! The oil may be hot.
|
||||
Wait until the oil has completely drained from the drainage hole.
|
||||
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Tip from
|
||||
AUTODOC:
|
||||
8 Move the container under the oil filter.
|
||||
9
|
||||
Unscrew the oil filter. Use the 76/14-F socket.
|
||||
10
|
||||
Prepare a container for the old oil filter. Put the old oil filter in the container.
|
||||
11
|
||||
Clean the oil filter seat.
|
||||
CLUB.AUTODOC.CO.UK 5–10
|
||||
Move up the container. The oil starts to drain out of the drainage hole
|
||||
immediately after you have removed the oil filter.
|
||||
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Tip:
|
||||
12
|
||||
Lubricate the rubber seal of the new filter with a little amount of fresh oil.
|
||||
13
|
||||
Screw the new filter into its place. Use the 76/14-F socket. Use a torque wrench. Tighten it to 23 nm torque.
|
||||
14
|
||||
Clean the area of the oil pan drainage hole.
|
||||
15
|
||||
Screw in the new drainage plug and tighten it. Use a drive socket #15. Use a torque wrench. Tighten it to 27 nm
|
||||
torque.
|
||||
CLUB.AUTODOC.CO.UK 6–10
|
||||
16
|
||||
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
|
||||
17
|
||||
Lower the car.
|
||||
18
|
||||
Remove the oil filler cap. Insert the funnel.
|
||||
19
|
||||
Pour oil into the engine through the filler. Required amount of oil: 3.6 L.
|
||||
CLUB.AUTODOC.CO.UK 7–10
|
||||
Use the oil recommended by the manufacturer.
|
||||
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). Professionals recommend:
|
||||
20
|
||||
Check the oil level using the dipstick. Top up oil if necessary.
|
||||
21
|
||||
Tighten the oil filler cap.
|
||||
22
|
||||
Run the engine for a few minutes. After the oil pressure warning light goes out, stop the engine.
|
||||
23
|
||||
Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary.
|
||||
CLUB.AUTODOC.CO.UK 8–10
|
||||
The oil level should be between the Min and Max marks.
|
||||
Please note!
|
||||
24
|
||||
Remove the fender protection cover.
|
||||
25
|
||||
Close the hood.
|
||||
VIEW MORE TUTORIALS
|
||||
CLUB.AUTODOC.CO.UK 9–10
|
||||
The oil level should be between the Min and Max marks.
|
||||
Make sure that the oil filler cap is properly tightened.
|
||||
Check the threaded plug of the drainage hole and the oil filter seal for tightness.
|
||||
If necessary, carefully tighten them up.
|
||||
Note that oil pressure warning light, which indicates insufficient pressure in the
|
||||
lubrication system, may be on for a longer time than usual. After a few seconds,
|
||||
the oil will fill all the channels, and the light will go out.
|
||||
To protect the environment from pollution, be sure to dispose of the used filters
|
||||
at special collection points.
|
||||
WELL DONE!
|
||||
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). AUTODOC
|
||||
recommends:
|
||||
Replacement: engine oil and filter – TOYOTA Corolla Verso (AR10). AUTODOC
|
||||
experts recommend:
|
||||
AUTODOC — TOP QUALITY AND AFFORDABLE CAR
|
||||
PARTS ONLINE
|
||||
A GREAT SELECTION OF SPARE PARTS FOR YOUR CAR
|
||||
OIL FILTER: A WIDE SELECTION
|
||||
The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable
|
||||
for any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
|
||||
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot
|
||||
replace advice from specialists.
|
||||
AUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe
|
||||
the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of
|
||||
road safety.
|
||||
© Copyright 2022 – All the contents of this website, in particular texts, photographs and graphics, are protected by copyright. All rights, including
|
||||
reproduction, publication, editing and translation rights, are reserved by AUTODOC GmbH.
|
||||
CLUB.AUTODOC.CO.UK 10–10
|
||||
DISCLAIMER:
|
||||
AUTODOC MOBILE APP: GREAT DEALS AND CONVENIENT
|
||||
SHOPPING
|
||||
@@ -0,0 +1,156 @@
|
||||
How to change front
|
||||
brake pads on TOYOTA
|
||||
Corolla IX Hatchback
|
||||
(E120) – replacement
|
||||
guide
|
||||
SIMILAR VIDEO TUTORIAL
|
||||
This video shows the replacement procedure of a similar car part on another vehicle
|
||||
CLUB.AUTODOC.CO.UK 1–11
|
||||
This replacement procedure can be used for:
|
||||
TOYOTA Corolla IX Hatchback (E120) 1.6 VVT-i (ZZE121_), TOYOTA Corolla IX
|
||||
Hatchback (E120) 1.8 VVTi (ZZE122), TOYOTA Corolla IX Hatchback (E120) 1.8 4WD, TOYOTA Corolla IX Hatchback (E120) 1.8 (ZZE122_), TOYOTA Corolla IX Hatchback
|
||||
(E120) 1.5 VVT-i (NZE121_)
|
||||
The steps may slightly vary depending on the car design.
|
||||
Important!
|
||||
This tutorial was created based on the replacement procedure for a similar car part
|
||||
on: TOYOTA Prius II Liftback (XW20) 1.5 Hybrid (NHW2_)
|
||||
Buy tools
|
||||
CLUB.AUTODOC.CO.UK 2–11
|
||||
REPLACEMENT: BRAKE PADS – TOYOTA COROLLA IX
|
||||
HATCHBACK (E120). TOOLS YOU NEED:
|
||||
Wire brush
|
||||
WD-40 spray
|
||||
Brake cleaner
|
||||
Anti-squeal paste
|
||||
Copper grease
|
||||
Combination spanner #13
|
||||
Combination spanner #17
|
||||
Drive socket # 13
|
||||
Wheel impact socket #21
|
||||
Brake caliper wind back tool
|
||||
Torque wrench
|
||||
Crow bar
|
||||
Wheel chock
|
||||
REPLACEMENT: BRAKE PADS – TOYOTA COROLLA IX HATCHBACK
|
||||
(E120). USE THE FOLLOWING PROCEDURE:
|
||||
1
|
||||
Open the bonnet. Unscrew the brake fluid reservoir cap.
|
||||
2
|
||||
Secure the wheels with chocks.
|
||||
3
|
||||
Loosen the wheel mounting bolts. Use wheel impact socket #21.
|
||||
4
|
||||
Raise the front of the car and secure on supports.
|
||||
CLUB.AUTODOC.CO.UK 3–11
|
||||
Perform the replacement of brake pads in complete set for each axis. This
|
||||
provides effective braking.
|
||||
The replacement procedure is identical for all brake pads on the same axle.
|
||||
All work should be done with the engine stopped.
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||
recommends:
|
||||
5
|
||||
Unscrew the wheel bolts.
|
||||
6
|
||||
Remove the wheel.
|
||||
7
|
||||
Spread the brake pads. Use a crowbar.
|
||||
8
|
||||
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
|
||||
CLUB.AUTODOC.CO.UK 4–11
|
||||
To avoid injury, hold up the wheel when unscrewing the bolts.
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Tip from
|
||||
AUTODOC:
|
||||
9
|
||||
Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #17.
|
||||
10
|
||||
Remove the brake caliper.
|
||||
CLUB.AUTODOC.CO.UK 5–11
|
||||
Tie the caliper to the suspension or to the body with a wire without disconnecting
|
||||
from the brake hose to prevent depressurization of the brake system.
|
||||
Make sure that the brake caliper is not hanging on the brake hose.
|
||||
Don't press the brake pedal after the brake caliper has been removed. As a result,
|
||||
the piston can fall out from the brake cylinder, and brake fluid leakage and
|
||||
depressurization of the system may occur.
|
||||
Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Tip:
|
||||
11
|
||||
Remove the brake pads. Use a crowbar.
|
||||
12
|
||||
Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use WD-40 spray.
|
||||
13
|
||||
Treat the brake caliper piston. Use a brake cleaner.
|
||||
CLUB.AUTODOC.CO.UK 6–11
|
||||
Measure the brake disc thickness. Upon reaching the wear limit the part must be
|
||||
replaced.
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). After applying
|
||||
the spray, wait a few minutes.
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||
experts recommend:
|
||||
AUTODOC recommends:
|
||||
14
|
||||
Press in the brake caliper piston. Use brake caliper wind back tool.
|
||||
15
|
||||
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use antisqueal paste.
|
||||
16
|
||||
Install new brake pads.
|
||||
CLUB.AUTODOC.CO.UK 7–11
|
||||
Make sure the disc surface is clean before installing the pads.
|
||||
Make sure the pads are installed with linings facing the disc.
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Tip from
|
||||
AUTODOC experts:
|
||||
AUTODOC recommends:
|
||||
17
|
||||
Install the brake caliper and fix it. Use a drive socket #13. Use a torque wrench. Tighten it to 35 Nm torque.
|
||||
18
|
||||
Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
|
||||
19
|
||||
Clean the brake disk surface. Use a brake cleaner.
|
||||
20
|
||||
Install the wheel.
|
||||
CLUB.AUTODOC.CO.UK 8–11
|
||||
After applying the spray, wait a few minutes.
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||
experts recommend:
|
||||
21
|
||||
Screw in the wheel bolts. Use wheel impact socket #21.
|
||||
22
|
||||
Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 103 Nm
|
||||
torque.
|
||||
23
|
||||
Remove the jacks and chocks.
|
||||
CLUB.AUTODOC.CO.UK 9–11
|
||||
Important! Hold the wheel while screwing in the fastening bolts. TOYOTA Corolla
|
||||
IX Hatchback (E120)
|
||||
Important! Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). Check the brake fluid level in the reservoir and top up if necessary.
|
||||
AUTODOC recommends:
|
||||
AUTODOC recommends:
|
||||
24
|
||||
Tighten the brake fluid reservoir cap.
|
||||
25
|
||||
Close the hood.
|
||||
VIEW MORE TUTORIALS
|
||||
CLUB.AUTODOC.CO.UK 10–11
|
||||
TOYOTA Corolla IX Hatchback (E120) – Press the brake pedal several times with
|
||||
the engine shut down until you feel the resistance built up.
|
||||
Slow down smoothly for first 150-200 km after the brake pads replacement. Avoid unneccessary and sharp braking to a stop.
|
||||
WELL DONE!
|
||||
AUTODOC recommends:
|
||||
Replacement: brake pads – TOYOTA Corolla IX Hatchback (E120). AUTODOC
|
||||
recommends:
|
||||
AUTODOC — TOP QUALITY AND AFFORDABLE CAR
|
||||
PARTS ONLINE
|
||||
A GREAT SELECTION OF SPARE PARTS FOR YOUR CAR
|
||||
BRAKE PADS: A WIDE SELECTION
|
||||
The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable
|
||||
for any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
|
||||
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot
|
||||
replace advice from specialists.
|
||||
AUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe
|
||||
the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of
|
||||
road safety.
|
||||
© Copyright 2022 – All the contents of this website, in particular texts, photographs and graphics, are protected by copyright. All rights, including
|
||||
reproduction, publication, editing and translation rights, are reserved by AUTODOC GmbH.
|
||||
CLUB.AUTODOC.CO.UK 11–11
|
||||
DISCLAIMER:
|
||||
AUTODOC MOBILE APP: GREAT DEALS AND CONVENIENT
|
||||
SHOPPING
|
||||
Binary file not shown.
Binary file not shown.
+526
-156
File diff suppressed because one or more lines are too long
+4
-1
@@ -7,4 +7,7 @@ scikit-learn
|
||||
langchain-community
|
||||
langchain-openai
|
||||
langchain-huggingface
|
||||
langchain-text-splitters
|
||||
langchain-text-splitters
|
||||
unstructured[all-docs]
|
||||
docx2txt
|
||||
docx
|
||||
Binary file not shown.
Binary file not shown.
Reference in New Issue
Block a user