€•ïŒ&langchain_community.docstore.in_memory”ŒInMemoryDocstore”“”)�”}”Œ_dict”}”(Œ!4df88a70d30747639ad4acbec19194150”Œlangchain_core.documents.base”ŒDocument”“”)�”}”(Œ__dict__”}”(Œid”NŒmetadata”}”(Œfilename”Œaudio-1”Œduration”Œ0-3 minutes”uŒpage_content”X Hello friend, how is it going? Welcome back to Toyota Maintenance YouTube channel. I have today in my shop this 2009 Toyota Corolla LE. She has only 90,000 miles on the odometer. I don't know this vehicle at all. It's a new customer, new car and they asked for a very detailed inspection. The inspection is successfully finished and that gives me great opportunity to talk about the most common problems with this generation of Corolla. And let's go and start with the problem which will be most expensive to repair. And I'm pointing at this car for the reason the name of it is written right here. Variable valve timing. This 1.8 liter 2Z RFE engine is equipped with the variable valve timing and if you will have a problem with it you will basically hear the rattling on the cold start. It is the known problem but I even hesitate if I should say it very common problem I personally didn see that much happening on the cars I serviced in the past And of course it always very important when you have an engine with VVT to be on top of the oil changes keeping the oil clean and possibly avoid these problems. Speaking about engine oil, we have immediately another common problem. These engines are known for engine oil consumption. Unfortunately, some of them were using or eating engine oil way faster, consuming the oil way faster than they supposed to. to. So this vehicle has a windshield sticker for 5,000 miles. All change there is still remaining 900 miles and let me show you what I discovered on my inspection. I let it sit so the oil got a chance to get all the way in the oil pan. I pulled that engine oil lipstick and of course it was confirmed it's barely touching the low mark I hope you can see it on it yeah so even this engine is consuming more than it's supposed to within a 5,000 miles”Œtype”h uŒ__fields_set__”�”(hh�Œ__private_attribute_values__”}”ubŒ!4df88a70d30747639ad4acbec19194151”h
)�”}”(h}”(hNh}”(hŒaudio-1”hŒ3-6 minutes”uhXí It was correctly filled to the top. This is way too much. Between the marks on this engine I believe it's 1.4 quarts. So this is way too much and this engine is part of that problem. Is it catastrophic problem or something what should stop you from purchasing it? Well, that's up to debate. It will not stop me buying this vehicle. All I will have to do within 2,000 miles or 3,000 miles is check the oil. And here it's so easy to add another 1 quart of the oil. Also, 1 quart of the oil, even if you buy the full synthetic 0W-20, costs only like 7 bucks. So what's the big deal? And let's be organized and continue still or stick still with the engine oil. And we will be looking on this side passenger side of the engine. Some people will observe the oil engine oil on this side of the engine. Do you see that sensor which is coming out there? It could be leaking from that. Or we can look a little bit later when we will lift this vehicle up we can look on the back of the engine where is timing chain tensioner it a hydraulic tensioner and its gasket could be leaking surprisingly and i agree with that it on most of these i see those leaks surprisingly this one is absolutely dry i already looked from underneath this one is exception to the rule if we stay together on this side and I will bring that light for one last time right underneath the alternator hopefully you see the water pump pulley so the water pumps they don't last forever is it the common problem I will not say I will say it's common maintenance but the word common is there so these water pumps are right here driven by this belt nicely on outside it's not a timing belt moving it because this engine has timing chain so this is a relatively easy repair a little note also what do you see right here this doesn't have an automatic belt tensioner but it's manual basically through this alternator. It's right here in front of you. Maybe that light was actually not helping us. You see the tensioner? Right here. The next item is related to the ignition.”hh uh�”(hh�h}”ubŒ!4df88a70d30747639ad4acbec19194152”h
)�”}”(h}”(hNh}”(hŒaudio-1”hŒ6-9 minutes”uhXc 100% say that these engines to ZRFs they have it's a common that they are misfires detected you will get that check engine light and then P0 whatever codes for misfire on the multiple cylinders or on the one only and so on and so on this vehicle the owner who brought it first time here wrote it in the comment or told me in the text message he said yeah that is there is a history with misfires on this engines on this engine particle engine and there is already one or multiple coils installed as a part of that detail inspection I confirmed that I can see that number two might be Toyota but it's not matching the way it's dirty so it was replaced I believe these are Terta Danzos yes made in Japan now what will shock you somebody was taking care of that misfire they replaced the coil and to my amazement well I was not amazed about this they did obviously replace the spar plugs To my amazement they put completely wrong spark plugs in it 2009 2ZRFE 1 liter engine and I will be not discussing in this video whatsoever that 2 liter it different beast So we focus on most common engine and the most common problems in these Corollas. So somebody put in it NGK. This engine is supposed to have only Denso SC20HR11. Did I say it correctly? SC20HR11. It's already coming. I sent the report, detailed report to the owner. I said no, that doesn't belong there. It is nice and new, but it doesn't belong there. There's supposed to be only iridium acetyl-HR11. What I pulled out, newly looking, NGK, ILKAR7B11 non-iridium plug. Why is it there? Well, because somebody was in a hurry, They then maybe had no access to the SC20HR11, but most likely they wanted safe money. This is way cheaper than Iridium's power plug which goes up to 16 bucks a piece. This one maybe was 8. Eight dollars stands for somebody made 32 dollars. Like that, just cutting corners. So no way, the owner already said.”hh uh�”(hh�h}”ubŒ!4df88a70d30747639ad4acbec19194153”h
)�”}”(h}”(hNh}”(hŒaudio-1”hŒ9-12 minutes”uhX³ We will put the correct spark plugs. I ordered them. They are on the way. Meanwhile we are making this video. And these misfires were correctly repaired by replacing the coils. It actually the service who did this work fixed the problem. They replaced the coil which was failing. So I agree with them. That's fine. just for God's sake if you can please put correct spark plugs in that engine so the owner will not have problems in the future I already inspect the remaining areas as you know me throttle body is dirty the muff it's dirty engine air filter it's on the dirty side we are going to replace it brake fluid which cannot see it's opening from here brake fluid is also dirty the battery is incorrect it's supposed to be bigger you can even see it doesn't fit in that holder i even tested it state of health it's only like 70 percent so that should be replaced too but this i'm just giving you walk around let's go back to the most common problems. Here this vehicle still have a automatic transmission dipstick If you will stick with the advice which is written on it which says no need to replace the ATF blah blah blah blah blah well don do it maintain your fluid in your transmission don't listen to those crazy stickers they were putting on these at those years that's all nonsense we know we need to change the engine oil and maintain that and we need we know that when the automatic transmission fluid is burned it's contaminated it also needs to be replaced but these automatic transmissions are not part of this video as the common problems it's exactly opposite I don't remember at the dealer and here in my mini shop I don't remember ever have one failed I'm not saying they don't but it's not a common what is common they last actually for the lifetime of the vehicle just give them nice and clean oil another common problem we will discuss right here and it actually will be two of them right in middle of your screen. Number one front wheel bearing”hh uh�”(hh�h}”ubŒ!4df88a70d30747639ad4acbec19194154”h
)�”}”(h}”(hNh}”(hŒaudio-1”hŒ12-15 minutes”uhXz This vehicle has only 90,000 miles but guess what? Both bearings are already showing very small play. This one I don't know why but as usually this one is smaller. It starts on this side and the other ones follow. Let me show you. Hopefully you will be able to hear it. That's a lift. There is definitely, I will say like a millimeter if I can say that, on that diameter here the movement. So it's already in the comments and we will be dealing with that problem soon. That's unfortunately pretty costly if you have to replace bows from wheel bearings. And I said there will be two items right in front of you in the middle of screen. Wheel bearing right here and the struts. Struts, I don't know why, are relatively common problem on these. Not the rear ones. The rear has also struts. I never replaced one of them ever you can see it right here nicely it's a very simple design here nothing really go bad here except we will be coming back there but for different item So the struts on both sides these ones are totally fine Now how you will see your struts are bad Well the vehicle will start kind of bouncing around but mainly even if it's on the ground You will see there will be oil even the towers below here. It will be all wrapped in the oil. When that goes it starts leaking pretty crazy and everything will be wet here. So these ones are still original OEM and they are still holding pretty good. Where we were together looking on that engine bay you didn't see any power steering reservoir also we were looking on that water pump and the belt and the belt was kind of simply going around that's because this vehicle was equipped or is equipped with electric steering apparently there were some failures on it and it was to certain degree common problem there was campaign or it was being taken care of I personally don't see it so I'm hesitating if it should be included in the common problems I don't”hh uh�”(hh�h}”ubŒ!4df88a70d30747639ad4acbec19194155”h
)�”}”(h}”(hNh}”(hŒaudio-1”hŒ15-18 minutes”uhX{ have these problems coming to me so I will say no but I wanted make you aware that there were definitely in certain years with that electric steering there were problems with it. Last but not least unfortunately you will discover problem and it's a common problem and you will discover it in the vehicle on your dashboard. It's not this problem. This is some kind of incredible improvement by the owner. This doesn't count. So you will be driving your vehicle and suddenly you will get that check engine light on. You will have a code for EVEB and you will hope it's just a loose filler cap or the ratchet is broken on that filler cap. You will hope it's the code and in this case it will be code for a very small leak. But unfortunately these are pretty common for filling right here. I said we will be coming back here. This is that entire evap canister. It's a complicated unit and it's very expensive. So if you ever have evap codes which are saying the purge flow is incorrect or something like that pay for a correct diagnosis because these from dealer can be extremely pricey So what is my conclusion for 2009 to 2013 Corolla generation? What's conclusion? Will I buy one or will I say no? Way too problematic vehicle. I think with the correct maintenance and paying at least a little bit of attention to the engine and keeping that oil lever correctly, I think these are super great vehicles to drive from point A to point AB. Nothing exciting obviously, but they are gas savers, they are reliable and I will say in relativity of automotive world they are super cheap to maintain in my opinion the brake job everything it's easy you have a rear drum brakes in the back you can drive a lot of miles on those this one has brand new brake pads almost in front might be the first replacement at 90 000 miles The rear brake shoes I already opened that are still 2-3mm might be purely theoretically original too.”hh uh�”(hh�h}”ubŒ!4df88a70d30747639ad4acbec19194156”h
)�”}”(h}”(hNh}”(hŒaudio-1”hŒ18-21 minutes”uhXÛ this without any hesitation buy one of these to just get to the work and back and save a lot of money on the gas that's my feeling you please share underneath the video your experience with others because that's why we filming this creating community of Toyota enthusiasts who share their own own experience if you like the video give it a thumb up and be subscribed i will always have a lot of new stuff coming your way thank you for watching and have a great day my friend”hh uh�”(hh�h}”ubŒ!320efd7dcc8342caa948797de72097640”h
)�”}”(h}”(hNh}”(hŒaudio-2”hŒ0-3 minutes”uhX_ Hey guys, ChrisFix here and today I'm going to show you how to change the oil in your car or truck. This video is specifically geared to beginners who have never done an oil change. So this is going to be an in-depth video and after watching it you'll be able to change your own oil. Many inexpensive oil change shops will use cheap oil and really cheap filters. So by doing an oil change yourself you could use good motor oil, a good filter, and know the job is getting done right. Plus you get to save some money and it's fun to work on your own car. If you've ever done oil changes before and want to share your tips, leave a comment. Now let's take a look at the tools you need to change your oil. So here's everything you're going to need to change your oil. You can see we're just using common hand tools. We have a socket set that has a ratchet and some sockets. Gloves so you don't get the oil on your skin because oil is not good for you. Paper towels to clean up. We have our oil and filter and I'll explain in a second how to find the correct oil and the correct filter for your car. We have an oil filter wrench, you might need it or you might not but it's worth to have just in case. We have an oil catch pan so you can recycle your old oil and a funnel so you can fill up your engine with new oil. I'm also including a breaker bar just in case your drain bolt is hard to get off. This will make it really easy. In addition to tools to change the oil, you're also going to need something to jack your vehicle up. In this case we have ramps or you could use jack and jack stands and then a piece of wood to block off the rear tires and I'll show you everything. There's also another method you could use where you don need any of this You could just drive your vehicle up onto the curb to get enough access to safely get underneath and drain the oil So you can use whatever method works for you I just want to note also that any tools that I using here including the jacks jack stands ramps and even the oil check the description. I'll link everything. So if you don't have something, you could easily find it and you could easily see what I used. And as always, if you have any questions throughout this process, leave a comment below and I answer every question and comment. So by the end of this video, you'll be an oil change expert. So let's go take a trip to the store and let me show you how to find out what oil your car takes. To figure out what oil your car takes, you can look in the owner's manual. So just go grab your owner's manual. We're going to flip to the back here. You can look under oil and capacities. You can see it tells you how much oil you're going to need. So we're going to need 4 1â�„4 quarts. And then you want to check the viscosity of the oil that you need. and we're going to need 4 1â�„4 quarts of 0W-20. So let's go to the store and we'll check that out right now. Alright, we're in the store and we need to find a synthetic 0W-20 oil. There's a ton of oil to choose from. Here is 0W-20. You can see, here's where the viscosities are listed. 0W-20 is right here. Here's 10W-30. So make sure you get the correct viscosity. Here's the 0W-20 we need. We want a full synthetic. We need at least 4 quarts and this container has 5, so that's plenty. If you have an older car, you might not need synthetic, but I personally like running synthetic oil even in my older cars. There are a lot of myths out there on switching to synthetic, and just to be clear, I don't think there's a lot of myths out there on switching to synthetic. I think it's a good idea to switch to synthetic oil. I think it's a good idea to switch to synthetic oil.”hh uh�”(hh�h}”ubŒ!320efd7dcc8342caa948797de72097641”h
)�”}”(h}”(hNh}”(hŒaudio-2”hŒ3-6 minutes”uhX* so that you know you could switch to synthetic and you could switch back to conventional at any time. Conventional is cheaper, but on most new cars, you need to run synthetic. Plus, synthetic oil lasts longer. Speaking of how long oil lasts, change your oil at the recommended mileage that's listed in the owner's manual. Many cars have an oil life monitor that'll tell you when you need to change your oil, so just go by that. If you can't find any information on when you need to change your oil, I change the oil in my cars at around 5,000 miles. My van has over 300,000 miles, and we've had that car since new, and she's still running great. Okay, so we have our oil. Now let's go find the filter. There are tons of oil filters, but which one do you pick? Well, just look in the book here, and we're doing the oil change on a 2014 Nissan Sentra. Personally, I like using pyrolator filters, but any quality filter will do. We need an L14612. Okay, L14612, L14612, right here. Good. So there we go. We got the oil and the filter. I'm going to go check out real quick, and let's go change the oil. All right, so now that we got our correct viscosity oil, 0W20, and we have the correct oil filter, let's get underneath this car. And I'm going to show you how to jack the car up first, and then I'm going to use the because that what I prefer So an oil change has three basic parts One you got to drain the oil Two you have to change the oil filter And three you have to fill it with the correct new oil Let go step by step so you know exactly what you need to do The first step is to drain the oil. And to get to the oil drain plug, we have to go underneath the vehicle. So we're going to have to lift the vehicle up. To jack the car up, if you're not completely sure how to do it, you could check the owner's manual. It tells you exactly how to jack the car up to change a spare tire. But I'm going to show you right here what you need to do. And you want to make sure before where you jack the vehicle up, you block off the rear tire so the car doesn't roll. The other thing you want to do is if you have an automatic, make sure it's in park. If you have a manual, put it in first gear and also pull the emergency brake which will prevent the car from rolling. So get your jack and place it underneath the vehicle right where your jacking points are. In this case, the jacking points have these little indents in them. That area of the frame is meant to support the vehicle and then you can jack the car up. Once the car is jacked up you can get your jack stands and place it under the car right where there's a big piece of metal on the frame and then you're going to lower the car down onto the jack stands and then you have plenty of room to get to the oil pan. So we'll just let the car down slowly and you can see the jack stand is the only thing holding it up and once your car is safely supported on the jack stands I always like I like to put the jack right back on the frame just for extra support. So if for some reason the jack stand slips or something or malfunctions, you have backup with the jack.”hh uh�”(hh�h}”ubŒ!320efd7dcc8342caa948797de72097642”h
)�”}”(h}”(hNh}”(hŒaudio-2”hŒ6-9 minutes”uhX‡ Never be too safe. So that's how you jack your car up to do an oil change. I want to show you the method that I prefer. It's a lot easier, a lot safer, and that's using ramps. Make sure you always use jack stands and not just the jack. You don't want to just rely on the jack to protect you from the car falling on you. Like you saw, I like to use both. Double the protection. Now using ramps is my favorite method. It's the easiest, it's the safest, and it also raises the vehicle pretty high. All you have to do is park the vehicle in a spot where you can slide two ramps right under the wheels and then you just drive the car up the ramps. It's that simple. Make sure that you pull the emergency brake again and we're blocking off the rear tires again. And I think you can get why I like the ramps so much. Before you go under the car, even when you have the car jacked up, what you want to do is you want to just shake the car with your hand. The car should not move anywhere. You're just shaking it back and forth as hard as you can and it should be stable and this thing is stable. Once you know that the vehicle is safe to go under, you can see why I like using the ramps. Look at all this room that we have now. Alright so now let's go under the car and find the oil drain plug. So you can see my feet over there. This is the front of the car right here. And then we're looking up here. And if we look here you can see there's a bunch of stuff and you might be confused, oh where's the bolt that I need to undo? Where's the oil drain bolt? Well what you want to do is you want to locate the drain pan The drain pan is this right here It usually black and has a bolt coming out You can see the bolt right back here That your oil drain pan Now there's other things that look like it, but this should be pretty easy to find because you're looking for that bolt and you're looking for the black pan. But you could also see right here is another drain pan. But this drain pan here doesn't have any bolts to let fluid out. This is the transmission drain pan. So really simple to find the oil drain pan. And then actually you can see right behind the drain pan you want to locate your oil filter. In this case, oil drain pan here, oil filter is right behind it and it's up and down nice and easy to get to which is really good. In some vehicles, the oil filter is actually on top of the engine. For example, in this Toyota Tacoma you can see here. In this case though, it's underneath, it's pretty easy to get to. This is really easy to get to also. You can see the drain plug right there. Let's go get it off. Now before we remove the drain plug, get your oil collection pan, slide it under. Now we have a sideways view, you can see our filters right here, our oil drain pan is right here and our oil drain plug is right there. We have our oil catch can right here, it's kind of aimed behind a little bit because the oil is going to come out that way. In this case we're using a 14mm socket on our ratchet and to loosen you want to go this way counterclockwise righty-tighty lefty-loosey. So this might be a problem some of you might encounter where you're using your normal size ratchet it's hard to get”hh uh�”(hh�h}”ubŒ!320efd7dcc8342caa948797de72097643”h
)�”}”(h}”(hNh}”(hŒaudio-2”hŒ9-12 minutes”uhXB That drain plug out. Well don't be discouraged. There's an easy trick to use. And that trick is to use one of these long breaker bars. You can see here how much longer it is than my ratchet. And this is going to give you so much leverage that it's going to be really easy to get off. If you don't have a long breaker bar like this, you can get your ratchet and slip a pipe over the end to make it longer. Watch how easy this is going to be now. Boom, it's loosened. That's all it took. all it took. So now we can loosen this the rest of the way. Once it gets really loose, make sure your drain pan is ready to go. And you can loosen this by hand. Now you can wait for all the oil to drain out. Now I should mention, some people say you should change your oil after you run the car for like 10 minutes so the oil is warm and it flows easier. In reality, it doesn't matter. If you want to change your oil with the car sitting there, you just jack it up and the car is cold, all that oil is going to be in the oil pan. You're not going to risk burning yourself, and sometimes it just makes the job easier. Now if you're going to put your car up on the ramps, then you're starting your car anyway. Just make sure if you run your engine, you let it sit for like five to 10 minutes. Let it cool off a little bit so you don't burn yourself, and also so all the oil collects in the drain pan. On some oil drain plugs, there's a gasket to help seal the plug, and you can see here there's a copper crush gasket. These gaskets are generally one use so take off the old gasket and replace it with a new one Some people reuse these gaskets one or two times and never have a problem with leaks and I one of those people but in general I suggest you replace the gasket. Alright, the oil is completely drained. There are a few drops coming out, so let's screw in the drain plug and move on to the next step. Just screw it in by hand and it should tighten right up. I like to wipe away any extra oil before I tighten it down all the way so your drain pan stays clean and so you know if there's any oil leaking from the drain plug down the road. Now we want to tighten up our drain plug and to do that we want to go clockwise. So we're going to switch this so now we're going to tighten this clockwise and notice I'm using our ratchet and not our breaker bar. You want to use the small ratchet to tighten this. You're only tightening it so it's snug you don't want to over tighten it. You over tighten it you'll strip the drain plug and you'll cause way more problems. You have a washer on there. All you need to do is tighten it down to 20 foot pounds of torque, which is nothing. So use the small ratchet. Tighten it, and once it's snug, give it a little extra turn. And that's it. So we just finished step one, removing all the old oil. Now step two is changing the old oil filter. Okay, so we should be be able to get this off by hand. Nope, too tight. So if your oil filter is tight and it won't come off, we have four different style tools that you can use to get your oil filter off. This one's my favorite because it works for all different sizes.”hh uh�”(hh�h}”ubŒ!320efd7dcc8342caa948797de72097644”h
)�”}”(h}”(hNh}”(hŒaudio-2”hŒ12-15 minutes”uhXÏ
It's literally just a wrench and it grabs on and then you can turn it. This one, put it in here and then as you turn, you can see it gets smaller. But you can see this is a really small filter. This is for actually a big 454 cubic inch engine. So the oil filter on that is huge. Here's another adjustable one. It's rubber so it grabs on really tight. Just close it by pulling the rubber through here. and then when you turn to loosen, you turn like this, and it kind of grips because it's turning on here and grabbing it. These are good because they're adjustable, and they work on all different sizes. And the last style is this style, but you need it for each specific size that you use. But this is a really small filter, so you can see it won't work. But the idea is it's just like a giant socket for a filter. And then you can put your wrench right in here, just like that, and then boom. comes right off. But we're going to be using this because it's easy to use, quick, grabs on all different size filters. So let's get this filter off. Okay. You can see that does the trick. We can unscrew this the rest the way by hand. Make sure your oil catch can is right below where this is because this is going to leak oil. As you can see There we go Just put that right in there Alright so with our old filter out we want to grab our new filter And I like to pre-oil my filter. It prevents the car from running dry when you first start it up. So if you just put this filter in now and screw it in, there's no oil in here. So the oil has to fill this and then go to all the engine parts. But if we fill this first with our brand new oil, then we don't have to worry about the engine running dry and this is just going to give you a longer lasting engine. I should also mention that not every car you're going to be able to pre-fill these because some cars it's upside down or some cars it's in sideways. We just want to carefully fill this filter to the top just like that. Now what you want to do is you want to get oil around this gasket. You can see a little bit of oil got on the gasket just by chance but you want to make Make sure you have a clean finger. Just get a little bit of oil and just put it right around this gasket. And what that's going to do is it's going to make it easier to come off next time you do this and it's also going to prevent leaks. And that's all you need to do. Now let's go install it. So there's the drain pin. We go up and you look here and that's what the oil filter adapter looks like. And if we look there you can see the oil filter screws right onto that middle stud there. So it screws in right there. And you just try to make it flush as you turn it. So if it's flat as you turn it, it's going to be a little bit more stable.”hh uh�”(hh�h}”ubŒ!320efd7dcc8342caa948797de72097645”h
)�”}”(h}”(hNh}”(hŒaudio-2”hŒ15-18 minutes”uhX¼
should grab and you'll know when it grabs you'll feel it. Don't force it, it should go on really easily. You can see there, it's on. So now I just tighten it by hand. Don't use any tools to tighten these, just tighten it by hand. If your hands are slippery because it's oily, you grab a towel, clean it off and then turn it more by hand with the towel. Good. So step one is done. Step two, changing the oil filter is done. Now let's get the car on the ground and do step three which is adding new oil. So we're going to add the oil to the engine while we're on the ramps just so that we make sure that we don't start the engine with no oil in it. And when you're looking for where you add your oil, it's usually at the top of the engine. Here's where you check your oil. You can see it says engine oil on here. And that's not where you fill it. Where you fill it is right up here. It has the oil sign. It's upside down but it has the oil sign on here. And this is all dirty so you don't want to just take this cap off you want to clean the area first because you don't want that junk falling into the engine so just get your paper towel get in here and clean it good now that that's clean we can take this cap off and we'll place our funnel right in here so we could fill the engine up with brand new oil so on the side of our bottle we have a scale here that tells you how many quarts or liters you have and you want to do this on a level surface but you can see we pretty much full right now and we need to add four quarts It was four and a quarter quarts with the filter but we added the oil to the filter so it really just four quarts So we want to have a quart left which is right down here. I always have a towel ready just in case. I hate spilling oil on engine parts. Just a little top tip. If you pour it sideways like this, you actually have a little more control, surprisingly. And usually the oil doesn't come out in blobs. It comes out nice and smooth instead. So if we look here we have about a half a quart we need to add. And it looks like we're at about one quart so I'm going to stop there. Close that up. So we just finished the last step which is add oil. We have one more step to do and And that is to get the car off the jack stands, or in this case the ramp, on level ground and check the oil. Since we added oil, we can start the car. And you just want to make sure that there's no oil lights on. And you can see the oil light isn't on, so that means the engine's getting oil. Now we can back the car down. And now that we have the car back down on level ground, let's go check the oil. So shut the engine off. You want to let the engine sit for about 5 minutes so all the oil drops back down since we did start the engine.”hh uh�”(hh�h}”ubŒ!320efd7dcc8342caa948797de72097646”h
)�”}”(h}”(hNh}”(hŒaudio-2”hŒ18-21 minutes”uhXÑ After you let it sit for five minutes, get a towel, pull your dipstick out and clean it off. Put it back in. Make sure it's pushed down all the way. And then pull the dipstick back out. Okay, if we look at the dipstick, what you're looking for is the oil. You can see the oil's over here. There's low and there's high. So that dot right there means that the oil is low and you need to fill it up. That dot right there means the oil is high and it means that you have it completely full. Anywhere in between is good. I prefer trying to get it to the high. Now sometimes it's hard to see how much oil is on here, especially this brand new oil and especially this synthetic oil. So if you flip this over, you actually get a better look and you can see the oil goes right there. So we're right on the high, which is perfect. So we don't have to add oil or anything. If yours is too low, add a little bit of oil and check the level again. If you end up adding a little bit too much oil, that's not a big deal. If you add over a quart of extra oil, then you have a problem and you probably have to remove some of it because that could actually cause engine problems And that is the complete guide to changing oil in your car or truck Hopefully after this video you have no questions but if you do have questions just comment below I answer every comment and question Also if you end up doing your first oil change after watching this video, definitely let me know because I love to hear that stuff. Hopefully this video was helpful. If it was, remember to give it a thumbs up. Up on the screen are going to be other videos. You can find the links to those videos as well as any links to any tools that I used in this video in the description. The top tip for this video is, well, where do I put all my oil that I drained out from my filter and from the car? And the answer to that is you want to dispose all of your oil responsibly. You can see here in the corner of my garage I have all these old oil containers. I really need to make an oil run. But what you do is you just fill up a container. It could be an old oil container, it could be a milk container, orange juice, whatever you have. And what you do is you just fill up these containers and you go to your local auto parts store, your local garage, your local recycle center, places that sell the oil like Walmart, most of those places will take the oil and they'll take it for free so that they could recycle it so it doesn't become an environmental hazard.”hh uh�”(hh�h}”ubŒ!d1b538acbcd9495aae86c36306eeaf330”h
applies to all models and explains all equipment, including options. Therefore, you may find some explanations for equip-ment not installed on your vehi-cle.
All specifications provided in this
manual are current at the time of printing. However, because of the Toyota policy of continual product improvement, we reserve the right to make changes at any time without notice.
Depending on specifications,
the vehicle shown in the illustra-
tions may differ from your vehi-cle in terms of equipment.
Approximately five hours after
the engine is turned off, you may hear sound coming from under the vehicle for several minutes. This is the sound of a fuel evaporation leakage check and, it does not indicate a mal-function.A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their per-formance, repair, or replace-ment, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
This vehicle should not be modi-
fied with non-genuine Toyota products. Modification with non-genuine Toyota products could affect its performance, safety or durability, and may even violate governmental regu-lations. In addition, damage or performance problems resulting from the modification may not be covered under warranty.
The installation of a mobile
two-way radio system in your vehicle could affect electronic systems such as:
�Multiport fuel injection sys-
tem/sequential multiport fuel injection system
�Toyota Safety Sense 2.0For your information
Main Owner’s Manual
Noise from under vehicle
after turning off the engineAccessories, spare parts
data collected, used and shared by Toyota, please visitwww.toyota.com/privacyvts/
.
This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 sec-onds or less.
The EDR in this vehicle is
designed to record such data as:• How various systems in your
vehicle were operating;
• Whether or not the driver and
passenger safety belts were buckled/fastened;
• How far (if at all) the driver
was depressing the accelera-tor and/or brake pedal; and,
• How fast the vehicle was trav-
eling.
These data can help provide a better understanding of the cir-cumstances in which crashes and injuries occur.
NOTE: EDR data are recorded
by your vehicle only if a nontriv-ial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. How-ever, other parties, such as law enforcement, could combine the EDR data with the type of per-sonally identifying data rou-tinely acquired during a crash investigation.To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufac-turer, other parties, such as law enforcement, that have the spe-cial equipment, can read the information if they have access to the vehicle or the EDR.
�Disclosure of the EDR data
Toyota will not disclose the data
recorded in an EDR to a third party except when:
• An agreement from the vehicle’s
owner (or the lessee for a leased
vehicle) is obtained
• In response to an official request
by the police, a court of law or a government agency
• For use by Toyota in a lawsuit
However, if necessary, Toyota may:• Use the data for research on Event data recorder
disclosing information about the specific vehicle or vehicle owner
The SRS airbag and seat belt
pretensioner devices in your Toyota contain explosive chemi-cals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be sure to have the sys-tems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified ser-vice shop or by your Toyota dealer before you scrap your vehicle.
Special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Your vehicle has components
that may contain perchlorate. These components may include the airbags, seat belt preten-sioners, wireless remote control batteries, and the batteries in the tire pressure warning valve and transmitters.Scrapping of your Toyota
Perchlorate MaterialWARNING
â– General precautions while
driving
Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that
have impaired your ability to oper-
ate your vehicle. Alcohol and cer-
tain drugs delay reaction time,
impair judgment and reduce coor-
dination, which c ould lead to an
accident that could result in death or serious injury.
Defensive driving: Always drive
defensively. Anticipate mistakes
that other drivers or pedestrians
might make and be ready to avoid accidents.
Driver distraction: Always give
your full attentio n to driving. Any-
thing that distracts the driver, such as adjusting controls, talking on a cellular phone or reading can
result in a collision with resulting
death or serious injury to you, your occupants or others.
â– General precaution regarding
children’s safety
Never leave children unattended in the vehicle, and never allow
children to have or use the key.
Children may be able to start the
vehicle or shift the vehicle into neutral. There is also a danger
that children ma y injure them-
selves by playing with the win-
dows, the moon roof, or other
features of the vehicle. In addi-
tion, heat build-up or extremely cold temperatures inside the vehi-
that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.�Position the lap belt as low as possible over the hips.
�Adjust the position of the seatback. Sit up straight and well back in the seat.
�Do not twist the seat belt.
â– Child seat belt usage
The seat belts of your vehicle were
principally designed for persons of
adult size.
â—�Use a child restraint system appropriate for the child, until the child becomes large enough to
properly wear the vehicle’s seat
belt. (ï‚® P.46)
â—�When the child becomes large enough to properl y wear the vehi-
cle’s seat belt, follow the instruc-
tions regarding seat belt usage.
(ï‚®P.25)
â– Seat belt extender
If your seat belts cannot be fastened securely because they are not long enough, a personalized seat belt
extender is available from your Toy-
ota dealer free of charge.WARNING
â—�Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not
use a damaged seat belt until it
is replaced. Damaged seat belts cannot protect an occupant
from death or se rious injury.
â—�Ensure that the belt and plate
are locked and the belt is not twisted.If the seat belt does not function
correctly, immediately contact
your Toyota dealer.
â—�Replace the seat assembly, including the belts, if your vehi-
cle has been involved in a seri-
ous accident, even if there is no obvious damage.
â—�Do not attempt to install,
remove, modify, disassemble or
dispose of the seat belts. Have any necessary repairs carried
out by your Toyota dealer. Inap-
propriate handling may lead to incorrect operation.
Correct use of the seat
belts
WARNING
â– Using a seat belt extender
â—�Do not wear the seat belt
extender if you can fasten the seat belt without the extender.
belts to quickly restrain the occupants by retracting the seat belts when the vehicle is sub-jected to certain types of severe frontal or side collision or a vehi-cle rollover.
The pretensioners do not activate
in the event of a minor frontal impact, a minor s ide impact or a
rear impact.
â– Replacing the belt after the pre-
tensioner has been activated
If the vehicle is involved in multiple collisions, the pretensioner will acti-
vate for the first collision, but will not activate for the second or subse-
quent collisions.
WARNING
â– Adjustable shoulder anchor
Always make sure the shoulder belt is positioned across the cen-
ter of your shoulder. The belt
should be kept away from your neck, but not falling off your shoul-
der. Failure to do so could reduce
the amount of protection in an accident and cause death or seri-
ous injuries in the event of a sud-
den stop, sudden swerve or accident.
Seat belt pretensioners
(front seats)WARNING
â– Seat belt pretensioners
â—�Do not place anything, such as
a cushion, on the front passen-
ger’s seat. Doing so will
disperse the passenger’s weight, which prevents the sen-
sor from detecting the passen-
ger’s weight properly. As a result, the seat belt pretensioner
for the front passenger’s seat
may not activate in the event of a collision.
â—�If the pretensioner has acti-
vated, the SRS warning light will
come on. In that case, the seat belt cannot be used again and
Can help protect the head and chest of the driver and front passenger from
impact with interior components
SRS knee airbag
Can help provide dr iver protection
SRS seat cushion airbag
Can help restrain the front passenger
�SRS side and curtain shield airbags
SRS front side airbags
Can help protect the torso of the front seat occupantsSRS airbags
The SRS airbags inflate when the vehicle is subjected to cer-
tain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
• Can help protect primarily the h ead of occupants in the outer seats
• Can help prevent the occupants from being thrown from the vehi cle in the
event of vehicle rollover
â– SRS airbag system components
Seat cushion airbag
Front passenger occupant classification system (ECU and sen-
sors)
“AIR BAG ON� and “AIR BAG OFF� indicator lightsFront passenger airbagCurtain shield airbagsSide impact sensors (front doors)Side airbagsSeat belt pretensioners and force limiters
Side impact sensors (rear)
Side impact sensors (front)Driver airbagDriver’s seat bel t buckle switch
Driver’s seat position sensorDriver’s knee airbagSRS warning lightFront impact sensors
Front passenger seat belt reminder light “AIR BAG OFF� indicator light “AIR BAG ON� indicator lightFront passenger occupant classification system
Your vehicle is equipped with a front passenger occupant
classification system. This system detects the conditions of the front passenger seat and activates or deactivates the front
passenger airbag and seat cushion airbag.
System components
WARNING
â– Front passenger occupant
classification system precau-tions
Observe the following precautions regarding the front passenger
occupant classification system.
Failure to do so may cause death or serious injury.
�Wear the seat belt properly.�Make sure the front passenger’s seat belt latch plate has not been left inserted into the
cautions when children are in the vehicle.Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.
�It is recommended that chil-dren sit in the rear seats to avoid accidental contact with the shift lever, wiper switch, etc.
�Use the rear door child-pro-tector lock or the window lock switch to avoid children opening the door while driv-ing or operating the power window accidentally. (P.107, 129)
�Do not let small children operate equipment which may catch or pinch body parts, such as the power window, hood, trunk, seats, etc.WARNING
â– When children are in the vehi-
cle
Never leave children unattended in the vehicle, and never allow children to have or use the key.
Children may be able to start the
vehicle or shift the vehicle into
neutral. There is also a danger
that children ma y injure them-
selves by playing with the win-dows, the moon roof (if equipped)
or other features of the vehicle. In
addition, heat build-up or extremely cold temperatures
tion method• Fixed with a seat belt: P.51• Fixed with a child restraint
LATCH anchor: P.56
• Using an anchor bracket (for
top tether strap): P.58The laws of all 50 states of the U.S.A. as well as Canada now require the use of child restraint systems.
�Prioritize and observe the
warnings, as well as the laws and regulations for child restraint systems.
�Use a child restraint system until the child becomes large enough to properly wear the vehicle’s seat belt.
�Choose a child restraint sys-tem that suits your vehicle and is appropriate to the age and size of the child. Child restraint sys-
tems
Before installing a child
restraint system in the vehi-cle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., written in this manual.
Use a child restraint system when riding with a small child that cannot properly use a seat belt. For the child’s safety, install the child restraint system to a rear seat. Be sure to follow the installa-tion method that is in the oper-ation manual enclosed with the restraint system.
Table of contentsPoints to remember
WARNING
â– When a child is riding
Observe the following precau-
tions.
Failure to do so may result in death or serious injury.
â—�For effective protection in auto-
mobile accidents and sudden
stops, a child must be properly restrained, using a seat belt or
child restraint system which is
correctly installe d. For installa-
tion details, refer to the opera-
tion manual enclosed with the
child restraint system. General installation instruction is pro-
For the safety of a child, install a child restraint system to a rear seat. When installing a child restraint system to a front pas-senger seat is unavoidable, adjust the seat as follows and install the child restraint system:
�Move the front seat fully rear-Child restraint LATCH
tem on the rear seat facing the rear of the vehicle.
2Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted.
3Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended.4While pushing the child restraint system down into the rear seat, allow the shoul-der belt to retract until the child restraint system is securely in place.
After the shoulder belt has
retracted to a poi nt where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
5After installing the child
restraint system, rock it back and forth to ensure that it is installed securely. ( ï‚®P.55)
■Forward-facing  Convert-
ible seat
1If installing the child restraint system to the front passen-ger seat is unavoidable, refer to P.49 for the front passen-ger seat adjustment.
2If the head restraint interferes with your child restraint sys-tem, and the head restraint can be removed, remove the head restraint.Otherwise, put the head
COROLLA_U1For safety and securityrestraint in the upper most
position. (ï‚® P.121)
3Place the child restraint sys-tem on the seat facing the front of the vehicle.
4Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted.
5Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended.
6While pushing the child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place.
After the shoulder belt has
retracted to a poi nt where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
7If the child restraint has a top
tether strap, follow the child restraint manufacturer’s operation manual regarding the installation, using the top tether strap to latch onto the top tether strap anchor. (P.58)
8After installing the child restraint system, rock it back
1If installing the child restraint system to the front passen-ger seat is unavoidable, refer to P.49 for the front passen-ger seat adjustment.
2High back type: If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove the head restraint.Otherwise, put the head restraint in the upper most position. (ï‚® P.121)
3Place the child restraint sys-tem on the seat facing the front of the vehicle.
�Booster type�High back type
4Sit the child in the child restraint system. Fit the seat belt to the child restraint sys-tem according to the manu-facturer’s instructions and insert the plate into the buckle. Make sure that the belt is not twisted.
Check that the sh oulder belt is cor-
rectly positioned over the child’s
shoulder and that the lap belt is as
low as possible. ( ï‚®P.25)
â– Removing a child restraint
system installed with a seat belt
Press the buckle release button
and fully retract the seat belt.
When releasing the buckle, the
child restraint system may spring up due to the rebo und of the seat
cushion. Release the buckle while holding down the child restraint
LATCH anchors are provided for the outboard rear seat. (Marks displaying the location of the anchors are attached to the seats.)
â– When installing in the rear outboard seats
Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
1If the head restraint interferes
with your child restraint sys-tem, and the head restraint can be removed, remove the head restraint.Otherwise, put the head restraint in the upper most position. (ï‚® P.121)
�With flexible lower attach-ments
2Remove the anchor covers, and install the child restraint system to the seat.The bars are installed behind the
anchor covers.
For owners in Canada:
The symbol on a child restraint sys-
tem indicates the presence of a
lower connector system.
Canada only
�With rigid lower attachments
2Remove the anchor covers,
and install the child restraint system to the seat.
The bars are installed behind the
anchor covers.
For owners in Canada:
The symbol on a child restraint sys-
tem indicates the presence of a Child restraint system
COROLLA_U1For safety and securitylower connec tor system.
Canada only
3If the child restraint has a top
tether strap, follow the child restraint manufacturer’s operation manual regarding the installation, using the top tether strap to latch onto the top tether strap anchor. (P.58)
4After installing the child restraint system, rock it back and forth to ensure that it is installed securely. (ï‚® P.55)
â– When installing in the rear center seat
There are no LATCH anchors behind the rear center seat. However, the inboard LATCH anchors of the outboard seats, which are 15.6 in. (396 mm) apart, can be used if the child restraint system manufacturer’s instructions permit use of those anchors with the anchor spacing stated.Child restraint systems with rigid lower attachments cannot be installed in the center seat. This type of child restraint system can only be installed in the out-board seat.
â– Laws and regulations pertain-
ing to anchors
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming
to FMVSS213 or CMVSS213 speci-
fications can be used.
This vehicle is designed to conform
to SAE J1819.
WARNING
â– When installing a child restraint system
Observe the following precau-tions.
Failure to do so may result in
death or serious injury.
â—�When using the LATCH anchors, be sure that there are
no foreign objects around the anchors and that the seat belt is not caught behind the child
restraint system.
â—�Follow all installation instruc-
tions provided by the child restraint system manufacturer.
â—�Never attach two c hild restraint
system attachments to the same anchor. In a collision, one anchor may not be strong
enough to hold two child
restraint system attachments and may break. If the LATCH
anchors are already in use, use
the seat belt to install a child restraint system in the center
COROLLA_U1For safety and security1-3.Emergency assistance
*: If equipped
Microphone
LED light indicators“SOS� buttonSafety Connect*
Safety Connect is a sub-
scription-based telematics service that uses Global Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Con-nect is supported by Toy-ota’s designated response center, which operates 24 hours per day, 7 days per week.
Safety Connect service is available by subscription on select, telematics hard-ware-equipped vehicles.
By using the Safety Connect service, you are agreeing to be bound by the Telematics Subscription Service Agree-ment and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com in the United States, Toy-otapr.com in Puerto Rico and Toyota.ca in Canada. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.System components
COROLLA_U1For safety and securitySubscribers have the following
Safety Connect services avail-able:
�Automatic Collision Notifica-
tion
*
Helps drivers re ceive necessary
response from emergency service
providers. ( ï‚®P.64 )
*: U.S. Patent No. 7,508,298 B2
�Stolen Vehicle Location
Helps drivers in the event of vehicle theft. (ï‚®
P.64 )
�Emergency Assistance Button
(“SOS�)
Connects drivers to response-cen-
ter support. (ï‚® P.65 )
�Enhanced Roadside Assis-
tance
Provides drivers various on-road
assistance. ( ï‚®P.65 )
After you have signed the
Telematics Subscription Service Agreement and are enrolled, you can begin receiving ser-vices. A variety of subscription terms are available for purchase. Con-tact your Toyota dealer, call the following appropriate Safety Connect response center or push the “SOS� button in your vehicle for further subscription details. • The United States
1-855-405-6500
• Canada
1-888-869-6828
• Puerto Rico
1-877-855-8377
â– Safety Connect Services Infor-
mation
�Phone calls using the vehicle’s
Bluetooth® technology will not be
possible during Safety Connect.
â—�Safety Connect is available begin-
ning Fall 2009 on select Toyota models (in the contiguous United
States only). Contact with the
Safety Connect response center is dependent upon the telematics
device being in operative condi-tion, cellular connection availabil-ity, and GPS satellite signal
reception, which can limit the abil-
ity to reach the response center or receive emergency service sup-
port. Enrollment and Telematics
Subscription Service Agreement are required. A variety of subscrip-
tion terms are available; charges
vary by subscription term selected and location.
â—�Automatic Collision Notification, Emergency Assistance and Stolen
Vehicle Location are available in
the United States, including Hawaii and Alaska , Puerto Rico
and Canada, and Enhanced Roadside Assist ance are avail-
able in the United States, Puerto
Rico and Canada.
â—�Automatic Collision Notification,
Emergency Assistance, Stolen
Vehicle and Enhanced Road Assistance are not available in the
U.S. Virgin Islands.
For vehicles first sold in the U.S. Virgin Islands, no Safety Connect
The Safety Connect response cen-ter will offer support in multiple lan-guages.
The Safety Con nect system will
offer voice prompts in English,
Spanish, and French. Please indi-
cate your language of choice when
enrolling.
â– When contacting the response center
You may be unable to contact the response center if the network is
busy.
When the engine switch is
turned to ON, the red indicator light comes on for 2 seconds then turns off. Afterward, the green indicator light comes on, indicating that the service is active.The following indicator light pat-terns indicate specific system usage conditions:
�Green indicator light on =
Active service
�Green indicator light flashing = Safety Connect call in pro-cess
�Red indicator light (except at vehicle start-up) = System malfunction (contact your Toy-ota dealer)
�No indicator light (off) = Safety Connect service not active
â– Automatic Collision Notifi-cation
In case of either airbag deploy-ment or severe rear-end colli-sion, the system is designed to automatically call the response center. The responding agent receives the vehicle’s location and attempts to speak with the vehicle occupants to assess the level of emergency. If the occu-pants are unable to communi-cate, the agent automatically treats the call as an emergency, contacts the nearest emer-gency services provider to describe the situation, and requests that assistance be sent to the location.
â– Stolen Vehicle Location
If your vehicle is stolen, Safety Connect can work with local authorities to assist them in locating and recovering the vehicle. After filing a police report, call the Safety Connect response center at 1-855- 405-6500 in the United States, 1-877-855-8377 in Puerto Rico or 1- 888-869-6828 in Canada, and follow the prompts for Safety Connect to initiate this service. In addition to assisting law Safety Connect LED light
COROLLA_U1For safety and securityenforcement with recovery of a
stolen vehicle, Safety-Con-nect-equipped vehicle location data may, under certain circum-stances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Canada.
■Emergency Assistance But-ton (“SOS�)
In the event of an emergency on the road, push the “SOS� button to reach the Safety Connect response center. The answer-ing agent will determine your vehicle’s location, assess the emergency, and dispatch the necessary assistance required.
If you accidentally press the “SOS�
button, tell the response-center agent that you are not experiencing an emergency.
â– Enhanced Roadside Assis-
tance
Enhanced Roadside Assistance adds GPS data to the already included warranty-based Toyota roadside service.
Subscribers can press the
“SOS� button to reach a Safety Connect response-center agent, who can help with a wide range of needs, such as: towing, flat tire, fuel delivery, etc. For a description of the Enhanced Roadside Assistance services and their limitations, please see the Safety Connect Terms and Conditions, which are available at Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Canada.
Important! Read this informa-
tion before using Safety Con-nect.
â– Exposure to radio fre-quency signals
The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
In August 1996, the Federal
Communications Commission (FCC) adopted RF exposure guidelines with safety levels for mobile wireless phones. Those guidelines are consistent with the safety standards previously set by the following U.S. and international standards bodies.
�ANSI (American National
Standards Institute) C95.1 [1992]
�NCRP (National Council on Radiation Protection and Measurement) Report 86 [1986]
�ICNIRP (International Com-mission on Non-Ionizing Radi-Safety information for
comprehensive and periodic evaluations of the relevant sci-entific literature. Over 120 scien-tists, engineers, and physicians from universities, and govern-ment health agencies and industries reviewed the avail-able body of research to develop the ANSI Standard (C95.1).
The design of Safety Connect
complies with the FCC guide-lines in addition to those stan-dards.
To prevent unexpected trigger-ing of the alarm and vehicle theft, make sure of the following:
�Nobody is in the vehicle.
�The windows and moon roof
(if equipped) are closed before the alarm is set.
�No valuables or other per-sonal items are left in the vehicle.
â– Setting
Close the doors, trunk and NOTICE
â– To ensure the system oper-
ates correctly
Do not modify or remove the sys-tem. If modified or removed, the
proper operation of the system
cannot be guaranteed.Alarm*
The alarm uses light and
sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set:
�A locked door or trunk is unlocked or opened in any way other than using the entry function (if equipped), wireless remote control, mechanical key (if equipped) or key (if equipped). (The doors will lock again automatically.)
indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or turn
off. Have the vehicle inspected
by your Toyota dealer.
*2:This light illuminates on the
multi-information display.The indicators inform the driver
of the operating state of the vehicle’s various systems.Rear passengers’
seat belt reminder lights (ï‚®P.485)
Tire pressure warning
light
*1 (if equipped)
(ï‚®P.485)
(Orange)LTA indicator (if equipped)
(ï‚®P.485)
LDA indicator (if equipped) (ï‚®P.485)
(Flashes
or illumi-
nates)PCS warning light*1
(ï‚®P.486)
Slip indicator*1 (ï‚®P.486)
(Flashes)
(U.S.A.)Parking brake indicator (ï‚®P.486)
(Flashes)
(Canada)Parking brake indicator
(ï‚®P.486)
(Flashes)Brake hold operated indi-
cator*1 (if equipped)
(ï‚®P.487)
(Orange)iMT indicator*1 (if
equipped) (ï‚®P.487)
WARNING
â– If a safety system warning
light does not come on
Should a safety system light such as the ABS and SRS warning light not come on when you start the
engine, this cou ld mean that
these systems are not available to
help protect you in an accident,
which could result in death or seri-
ous injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
COROLLA_U2Vehicle status information and indicators*1:These lights come on when the
engine switch is turned to ON to
indicate that a system check is
being performed. They will turn
off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or turn off. Have the vehicle inspected by your Toyota dealer.
*2:This light comes on when the
system is turned off.
*3:Depending on the operating con-
dition, the color and illuminat-ing/flashing stat e of the light
change.
*4:In order to confirm operation, the
BSM outside rear view mirror indicators illumina te in the follow-
ing situations:
• When the engine switch is
turned to ON, the BSM func-
tion is enabled on of the
multi-information display.
• When the BSM function is
enabled on of the
multi-information display, the
engine switch is turned to ON.
If the system is functioning cor-
rectly, the BSM outside rear view mirror indicators will turn off after a few seconds.*3LTA indicator (if equipped) (ï‚®P.200)
COROLLA_U2Vehicle status information and indicators
â– Liquid crystal display
Small spots or light spots may
appear on the display. This phenom-enon is characteristi c of liquid crys-
tal displays, and there is no problem continuing to use the display.
The multi-information display is
operated using the meter control switches./ : Select menu icons
/ : Change displayed
content, scroll up/down the
screen and move the cursor up/down
Press: Enter/Set
Press and hold: Reset/Dis-play customizable items
Return to the previous screenCall sending/receiving and
history display
Linked with the hands-free system,
sending or receiving call is dis-played. For details regarding the hands-free system, refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL�.
â– Display items
�Speedometer display/Driving
range (4.2-inch display)
�Fuel economy
�Eco Driving Indicator/Driving range (if equipped)Driving information display
(ï‚®P.87)
Driving supp ort system
information display (ï‚®P.89)
Audio system-linked dis-play (ï‚®P.90)
Vehicle information dis-play (ï‚®P.90)
Settings display ( ï‚®P.90)
Warning message display (ï‚®P.490)
WARNING
â– Caution for use while driving
â—�When operating the multi-infor-
mation display while driving,
pay extra attention to the safety
of the area aroun d the vehicle.
â—�Do not look continuously at the multi-information display while
driving as you may fail to see
pedestrians, objects on the road, etc. ahead o f the vehicle.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not be updated.When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
â– Fuel economy
Use the displayed values as a ref-erence only.
Average fuel economy (after
reset)
To reset the average fuel economy
display, press and hold the
meter control switch.
Current fuel consumption
Displays instantaneous current fuel
consumption.Driving range
Displays driving ra nge with remain-
ing fuel.
This distance is computed based
on your average f uel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not be updated.When refueling, turn the engine switch off. If the ve hicle is refueled
without turning the engine switch off, the display may not be updated.
tion� is displayed, select “Trip Infor-mation�.
�Entune Audio with
DCM/Entune Audio Plus with DCM/Entune Premium Audio
1Press the “MENU� button.
2Select “Info� on the “Menu� screen.3Select “ECO� on the “Infor-mation� screen.
If a screen other than “Trip Informa-
tion� is displayed, select “Trip Infor-mation�.
Resetting the consumption
data
Fuel consumption in the past
15 minutes
Current fuel consumption
Average vehicle speed since
the engine was started.
Elapsed time since the
engine was started.
Cruising range
Average fuel consumption for
the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to ON. Use the displayed average fuel consumption as a refer-ence.
The image is an example only, and
may vary slightly from actual condi-tions.Fuel consumption
COROLLA_U2Vehicle status information and indicatorsâ– History
�Entune Audio without
DCM/Entune Audio Plus with-out DCM
1Press the “MENU� button.
2Select “Info� on the “Menu� screen.
If a screen other than “History� is
displayed, select “History�.
�Entune Audio with
DCM/Entune Audio Plus with DCM/Entune Premium Audio
1Press the “MENU� button.
2Select “Info� on the “Menu� screen.
3Select “ECO� on the “Infor-mation� screen.
If a screen other than “History� is
displayed, select “History�.
Best recorded fuel consump-
tion
Latest fuel consumptionPrevious fuel consumption
record
Resetting the history dataUpdating the latest fuel con-
sumption data
The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated. Use the displayed average fuel consumption as a reference.
The image is an example only, and
may vary slightly from actual condi-tions.
â– Updating the history data
Update the latest fuel consumption
by selecting “Clip� to measure the
current fuel consumption again.
â– Resetting the data
The fuel consumption data can be deleted by selecting “Clear�.
â– Cruising range
Displays the estimated maximum distance that can be driven with the
quantity of fuel remaining.
This distance is computed based on
your average fuel consumption. As a result, the actual distance that
inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and re-attempt to insert it.
After using the mechanical key,
store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted or the entry function does not operate properly, you will need the mechanical key. (ï‚®P.513)
â– If you lose your mechanical
keys
ï‚®P.513Using the key (vehicles
without a smart key sys-
tem and with a wireless remote control function)
Using the mechanical key (vehicles with a smart key
COROLLA_U3Before driving3-2.Opening, closing and locking the doors
â– Smart key system (if
equipped)
Carry the electronic key to enable this function.
1Grip the driver’s door handle
to unlock the door. Holding the driver’s door handle for approximately 2 seconds unlocks all the doors. Grip the front passenger’s door handle to unlock all the
doors.
*
Make sure to touch the sensor on
the back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.
*: The door unlock settings can be
changed. ( ï‚®P.104, 548)
2Touch the lock sensor (the
indentation on the side of the front door handle) to lock all the doors.
Check that the door is securely
locked.â– Wireless remote control (if
equipped)
�Vehicles without a smart key system
1Locks all the doors
Check that the d oor is securely
locked.
2Unlocks all the doors
Pressing the button unlocks the
driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
the electronic key is within about 2.3 ft. (0.7 m) of eithe r of the front out-
side door handles. (Only the doors detecting the key c an be operated.)
When starting the engine or changing engine switch modes
The system can be operated when the electronic key is inside the vehi-cle.
When opening the trunk
The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of the trunk release but-ton.
â– Alarms and warning messages
A combination of e xterior and inte-
rior buzzers as well as warning mes-
sages shown on the multi-information display are used to
prevent theft of the vehicle and acci-
dents resulting from erroneous operation. Take appropriate mea-
sures based on the displayed mes-
sage. (→P.490)
When only an ala rm sounds, cir-
cumstances and c orrection proce-
dures are as follows.
â—�Exterior buzzer sounds once for 5
secondsâ—�Interior buzzer sounds continu-
ously
â– Battery-saving function
The battery-saving function will be activated in ord er to prevent the
electronic key battery and the vehi-
cle battery from being discharged
while the vehicle is not operated for
a long time.
â—�In the following situations, the
smart key system may take some
time to unlock the doors.
• The electronic key has been left
within approximatel y 11 ft. (3.5 m)
of the outside of the vehicle for 2
minutes or longer.
• The smart key system has not SituationCorrection
procedure
An attempt was
made to lock the vehicle while a door was open.Close all of the doors and lock the doors again.
The trunk was closed while the electronic key was still inside the trunk and all the doors were locked.Retrieve the electronic key from the trunk and close the trunk lid.
SituationCorrection
procedure
The engine switch was turned to ACC while the driver’s door was open (or the driver’s door was opened while the engine switch was in ACC).Turn the engine switch off and close the driver’s door.
The engine switch was turned to off while the driver’s door was open.
COROLLA_U3Before drivingâ—�If the moon roof closes but then
re-opens slightly
1Stop the vehicle.
2Press and hold the “CLOSE�
switch.*1
The moon roof will close, reopen
and pause for approximately 10 sec-onds.
*2 Then it will close again, tilt
up and pause for approximately 1
second. Finally, it will tilt down, open
and close.
3Check to make sure that the
moon roof is completely closed
and then release the switch.
â—�If the moon roof tilts down but then tilts back up
1Stop the vehicle.
2Press and hold the “UP� switch*1
until the moon r oof moves into
the tilt up position and stops.
3Release the “UP� switch once
and then press and hold the “UP�
switch again.*1
The moon roof will pause for
approximately 10 se conds in the tilt
up position.*2 Then it will adjust
slightly and pause for approximately
1 second. Finally, it will tilt down,
open and close.
4Check to make sure that the
moon roof is completely closed
and then release the switch.
*1:If the switch is released at the
incorrect time, t he procedure will
have to be performed again from
the beginning.
*2:If the switch is re leased after the
above mentioned 10 second pause, automati c operation will
be disabled. In that case, press and hold the “CLOSE� or “UP� switch, and the mo on roof will tilt
up and pause for approximately 1 second. Then it will tilt down, open and close. Check to make sure that the moon roof is com-pletely closed and then release the switch.
If the moon roof does not fully close
even after perfo rming the above
procedure correctly, have the vehi-
cle inspected by your Toyota dealer.
â– Customization
Some functions can be customized. (ï‚®P.548)
WARNING
Observe the following precau-
tions.
Failure to do so may cause death or serious injury.
â– Opening the moon roof
â—�Do not allow any passengers to put their hands or heads outside
the vehicle while it is moving.
â—�Do not sit on top of the moon
roof.
â– Opening and closing the moon roof
â—�The driver is responsible for moon roof opening and closing
operations.
In order to prevent accidental operation, especially by a child,
do not let a child operate the
moon roof. It is possible for chil-dren and other passengers to
1With the brake pedal depressed, shift the shift lever to D. ( ï‚®P.153)
2Release the parking brake. (ï‚®P.163, 164)
3Gradually release the brake pedal and gently depress the accelerator pedal to acceler-ate the vehicle.
�Manual transmission
1While depressing the clutch pedal, shift the shift lever to 1. (ï‚®P.160)
2Release the parking brake. (ï‚®P.163, 164)
3Gradually release the clutch pedal. At the same time, gen-tly depress the accelerator pedal to accelerate the vehi-cle.â– Stopping
�Continuously variable trans-mission
1With the shift lever in D, depress the brake pedal.
2If necessary, set the parking brake.
If the vehicle is to be stopped for an
extended period of time, shift the shift lever to P. ( ï‚®P.153)
�Manual transmission
1While depressing the clutch
pedal, depress the brake pedal.
2If necessary, set the parking brake.
If the vehicle is to be stopped for an
extended period of time, shift the
shift lever to N. ( ï‚®P.160)
â– Parking the vehicle
�Continuously variable trans-
mission
1With the shift lever in D, depress the brake pedal to stop the vehicle completely.
2Set the parking brake (ï‚®P.163, 164), and shift the
shift lever to P. ( ï‚®P.153)
Check the parking brake indicator
is illuminated.
3Vehicles without a smart key
system: Turn the engine switch to OFF to stop the engine.Vehicles with a smart key system: Press the engine switch to stop the engine.Driving the vehicle
The following procedures should be observed to ensure safe driving:
combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.� on your
vehicle’s placard.
(2) Determine the combined
weight of the driver and passen-gers that will be riding in your vehicle.
(3) Subtract the combined
weight of the driver and passen-gers from XXX kg or XXX lbs.
(4) The resulting figure equals
the available amount of cargo and luggage load capacity.
For example, if the “XXX�
amount equals 1400 lbs. and there will be five 150 lb passen-gers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 − NOTICE
â—�Brake function
â—�Changes in the quantity and
quality of the eng ine oil, tran-
saxle fluid, clutch fluid, etc.
â—�Lubricant condition for the bear-
ings and suspension joints
(where possible), and the func-tion of all joints , bearings, etc.Cargo and luggage
Take notice of the following
information about storage precautions, cargo capacity and load:
weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calcu-lated in Step 4.
(6) If your vehicle will be towing
a trailer, load from your trailer will be transferred to your vehi-cle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (ï‚®P.145)
Toyota does not recommend towing
a trailer with your vehicle. Your vehicle is not designed for trailer towing.
Cargo capacity
Total load capacity (vehicle
capacity weight) ( ï‚®P.524)
When 2 people with the com-bined weight of A lb. (kg) are rid-ing in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb. (kg), the available amount of cargo and luggage load capacity will be C lb. (kg) as follows:
B
*2 lb. (kg) - A*1 lb. (kg) = C*3 lb.
(kg)
*1:A =Weight of people
*2:B =Total load capacity
*3:C =Available cargo and luggage
load
In this condition, if 3 more passen-
gers with the combined weight of D
lb. (kg) get on, the available cargo and luggage load will be reduced E lb. (kg) as follows:
C lb. (kg) - D*4 lb. (kg) = E*5 lb.
(kg)
*4:D =Additional weight of people
*5:E =Available cargo and luggage
load
As shown in the example above,
if the number of occupants increases, the cargo and lug-gage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the num-ber of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle.Calculation formula for
imum number of occupants whose estimated average weight is 150 lb. (68 kg) per person.
�Towing capacity
Toyota does no t recommend tow-
ing a trailer with your vehicle.
�Cargo capacity
Cargo capacity may increase or decrease depending on the weight and the number of occu-pants.
WARNING
â– Overloading the vehicle
Do not overload the vehicle.
It may not only cause damage to
the tires, but also degrade steer-ing and braking ability, resulting in
an accident.Trailer towing
Toyota does not recom-
mend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your vehicle is not designed for trailer tow-ing or for the use of tow hitch mounted carriers.
pressing the engine switch with brake pedal (continuously vari-able transmission) or clutch pedal (manual transmission) released. (The mode changes each time the switch is pressed.)1OFF
*
The emergency flashers can be
used.
2ACC
Some electrical components such
as the audio sys tem can be used.
“ACCESSORY� will be displayed on the multi-information display.
3ON
All electrical components can be used.
“IGNITION ON� will be displayed on
the multi-information display.
*: Vehicles with a continuously vari-
able transmission : If the shift
lever is in a position other than P when turning off the engine, the engine switch will be turned to ACC, not to off.
â– Auto power off function
Continuously variable transmission:
If the vehicle is left in ACC for more
than 20 minutes or ON (the engine is not running) for more than an WARNING
â—�If the engine switch is operated while the vehicle is running, a warning message will be shown
on the multi-info rmation display
and a buzzer sounds.
â—�Vehicles with a continuously
variable transmission: To restart
the engine after performing an
emergency shutdown, shift the shift lever to N and then press the engine switch.
entirely prevent battery discharge. Do not leave the vehicle with the
engine switch in ACC or ON for long periods of time when the engine is not running.
Manual transmission : If the vehicle
is left in ACC for more than 20 min-
utes or ON (the engine is not run-
ning) for more than an hour, the engine switch will automatically turn
off. However, this function cannot
entirely prevent battery discharge. Do not leave the vehicle with the
engine switch in ACC or ON for long periods of time when the engine is not running.
If the engine is stopped with the
shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACC. Perform the fol-lowing procedure to turn the switch off:1Check that the parking brake is set.
2Shift the shift lever to P.
3Check that “ACCESSORY� is displayed on the multi-infor-mation display and press the engine switch shortly and firmly.
4Check that “ACCESSORY� or “IGNITION ON� on the multi-information display are off.
NOTICE
â– To prevent battery discharge
â—�Do not leave the engine switch
in ACC or ON for long periods of
time without the engine running.
�If “ACCESSORY� or “IGNITION
ON� is displayed on the multi-informatio n display, the
engine switch is not off. Exit the vehicle after turning the engine switch off.
When stopping the engine
with the shift lever in a
position other than P (vehicles with a continu-
ously variable transmis-
sion)NOTICE
â– To prevent battery discharge
Do not stop the engine when the
shift lever is in a position other
than P. If the engine is stopped in another shift lever position, the
Even when switching the driving mode to sport mode with the intent of enabling engine braking, engine
braking will not o ccur because
dynamic radar cruise control with
full-speed rang e will not be can-
celed. (ï‚®P.249)
â– Restraining sudden start (Drive-Start Control)
ï‚®P.136
â– G AI-SHIFT
G AI-SHIFT automatically selects a
suitable gear for sporty driving
according to driver’s input and driv-ing conditions. G AI-SHIFT operates
automatically when th e shift lever is
in D and sport mode is selected for
the driving mode. (Selecting normal
mode or shifting the shift lever to the
M position cancels this function.)
â– After recharging/reconnecting the battery
ï‚®P.518:While the engine switch is in
ON and the brake pedal
depressed*, shift the shift lever
while pushing the shift release button on the shift knob.
:Shift the shift lever while
pushing the shift release button on the shift knob.
:Shift the shift lever normally.
When shifting the shift lever
between P and D, make sure that the vehicle is completely stopped and the brake pe dal is depressed.
*: For the vehicle be able to be
shifted from P, the brake pedal must be depressed before the shift release button is pushed. If the shift release button is pushed first, the shift lock will not be released.WARNING
â– When driving on slippery
road surfaces
Do not accelerate o r shift the shift
gears suddenly.
Sudden changes in engine brak-
ing may cause the vehicle to spin or skid, resulting in an accident.Shifting the shift lever
The shift lever can be shifted from P only when the engine switch is in
ON and the brake pedal is being
depressed.
â– If the shift lever cannot be shifted from P
First, check whether the brake pedal is being depressed.
If the shift lever cannot be shifted
with your foot on the brake pedal, there may be a pr oblem with the
shift lock system. Have the vehicle inspected by your Toyota dealer immediately.
The following steps may be used as
an emergency measure to ensure that the shift lev er can be shifted.
Releasing the shift lock:
1Set the parking brake.
2Turn the engine switch off.
3Depress the brake pedal.
4Ply the cover up with a flathead
screwdriver or equivalent tool.
To prevent damaging the cover,
wrap the tip of the flathead
screwdriver with a tape.
5Press and hold the shift lock
override button and then push
the shift release button on the shift knob.
The shift lever can be shifted while the button is pressed.
ï‚®P.249
To drive using temporary shift
range selection, operate the “-� or “+� paddle shift switch. When the “-� paddl e shift switch
is operated, the shift range switches to a range that enables engine braking force that is suit-able to driving conditions. When the “+� paddle shift switch is operated, the shift range switches to a range that is one WARNING
â– To prevent an accident when
releasing the shift lock
Before pressing the shift lock override button, m ake sure to set
the parking brake and depress the brake pedal.If the accelerator pedal is acci-
dentally depressed instead of the
brake pedal when the shift lock override button is pressed and the
shift lever is shifted out of P, the
vehicle may suddenly start, possi-bly leading to an accident result-
range. Changing the shift range allows restriction of the highest gear, preventing unnecessary upshift-ing and enabling the level of engine braking force to be selected.
1Upshifting
2Downshifting
The selected shift range, from D1 to
D10, will be dis played on the
multi-information display.
â– Gear step functions
â—�You can choose from 10 levels of
engine braking force.
â—�A lower gear s tep will provide
greater engine braking force than
a higher gear step, and the engine speed will also increase.
â– Deactivation of temporary
10-speed Sport Sequential
Shiftmatic mode
In the following situations, tempo-rary 10-speed Sport Sequential Shiftmatic mode will be deactivated:
â—�When the vehicle is stopped
â—�If the accelerator pedal is
depressed continuously for more
than a certain amount of time while in one gear range
â—�If the accelerator pedal is depressed abruptly and heavilyâ—�When the shift lever is shifted to a position other than D
�When the “+� paddle shift switch is operated for a certain amount of
time continuously
To enter 10-speed sport
sequential shiftmatic mode, shift the shift lever to M position. Gear steps can then be selected by operating the shift lever or paddle shift switches, allowing you to drive in the gear step of your choosing.
1Upshifting
2Downshifting
The gear changes once every time
the shift lever or paddle shift switch is operated.
The selected gear step, from M1 to
M10, will be dis played on the
multi-information display.
However, even when in the M
position, the gear steps will be automatically changed if the Changing gears in the M
engine speed to suit the driver’s operation of the clutch pedal and shift lever, helping the driver to shift gears more smoothly.Additionally, when the clutch pedal is operated, the iMT helps reduce shift shock, allowing for lighter shift operations when driving on a winding road or incline.
Press the “iMT� switch.
The iMT indicator will illuminate in
green.Press the switch again to cancel iMT.
â– The iMT may not operate when
In the following situ ations, iMT may
not operate. However, this does not
indicate a malfunction.
â—�The clutch pedal is not fully
depressed
â—�The clutch pedal is not fully released, such as if a foot is rest-
ing on the clutch pedal*
â—�Shift operation is performed after
the vehicle has been coasting with
the shift lever in NNOTICE
â– To prevent damage to the
vehicle
When shifting gears, observe the following precautions. Failure to do so may cause damage to the
engine, manual transmission,
and/or clutch.
â—�Do not shift the shift lever to R without depressing the clutch pedal.
â—�Do not lift up the ring section except when shifting the lever to
R.
â—�Shift the shift lever to R only
when the vehicle is stationary.
â—�Do not rest your hand on or hold the shift lever any time other
than when shifting.
â—�In order to not cause the engine
to overrev, make sure to only shift gears sequentially.
components overheating, which may affect braking performance and increase brake wear.Electric parking
brake*
The parking brake can be
set or released automati-cally or manually.
In automatic mode, the parking brake can be set or released automatically. Also, even in automatic mode, the parking brake can be set or released manually.
system is holding the brake, the brake hold operated indicator (yel-
low) comes on. WARNING
â– When parking the vehicle
Do not leave a child in the vehicle
alone. The parking brake may be released unintentionally and there is the danger of the vehicle mov-
ing that may lead to an accident
resulting in death or serious injury.
â– Parking brake switch
Do not set any o bjects near the
parking brake switch.Objects may inte rfere with the
switch and may lead the parking brake to unexpectedly operate.
NOTICE
â– When parking the vehicle
Before you leave the vehicle, set
the parking brake, shift the shift
lever to P (continuously variable transmission) or N (manual trans-
mission) and mak e sure that the
vehicle does not move.
â– When the system malfunc-
tions
Stop the vehicle in a safe place and check the warning messages.
â– When the parking brake can-
not be released due to a mal-
function
Driving the vehicl e with the park-
ing brake set will lead to brake
components overheating, which
may affect braking performance
and increase brake wear.
Have the vehicle inspected by
your Toyota dealer immediately if
this occurs.Brake Hold*
�Continuously variable trans-
mission
The brake hold system keeps the
brake applied when the shift lever is in D, B (vehicles without paddle shift switches), M (vehicles with paddle shift switches) or N with the system on and the brake pedal has been depressed to stop the vehicle. The system releases the b rake when the
accelerator pedal is depressed with the shift leve r in D, B (vehi-
cles without paddle shift switches) or M (vehicles with paddle shift switches) to allow smooth start off.
�Manual transmission
The brake hold system keeps the brake applied when the shift lever is in a forward driving position or N with the system on and the brake pedal has been depressed to stop the vehicle. The system releases the b rake when the
accelerator pedal is depressed with the shift lever in a forward driving position to allow smooth
the lever away from you to turn on the high beams.
Pull the lever to ward you to the
center position to turn the high
beams off.
2Pull the lever toward you and
release it to flash the high beams once.
You can flash the high beams with
the headlights on or off.
AFS (Adaptive Front-lighting
System) secures excellent visi-
bility at intersections and on curves by automatically adjust-ing the direction of the light axis of the headlights according to vehicle speed and the degree of the tire’s angle as controlled by steering input.
AFS operates at speeds of approxi-
mately 6 mph (10 km/h) or higher.
â– Customization
Some functions can be customized. (ï‚®P.548)Turning on the high beam headlights
Beam switch.2Push the lever away from you with the headlight switch
in the or position.
The Automatic High Beam indicator
will come on when the system is
operating.
â– Conditions to turn the high
beams on/off automatically
â—�When all of the f ollowing condi-
tions are met, t he high beams will
be turned on autom atically (after
approximately 1 second):
• The vehicle speed is approxi-
mately 21 mph (34 km/h) or more.
• The area ahead of the vehicle is
dark.
• There are no vehicles ahead with
headlights or tail lights turned on.
• There are few str eetlights on the
road ahead.
â—�If any of the following conditions
are met, the high beams will turn off automatically:
• The vehicle speed is below
approximately 17 mph (27 km/h).
• The area ahead of the vehicle is
not dark.
• Vehicles ahead have their head-
lights or tail lights turned on.
• There are many streetlights on the
road ahead.
â– Camera sensor detection infor-mation
â—�The high beams m ay not be auto-
matically turned off in the following situations:
• When a vehicle suddenly appears Automatic High Beam
The Automatic High Beam
uses a camera sensor located behind the upper portion of the windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and auto-matically turns the high beams on or off as neces-sary.
WARNING
â– Limitations of the Automatic
High Beam
Do not overly rely on the Auto-matic High Beam. Always drive
safely, taking care to observe your surroundings and turning the high
beams on or off manually if nec-
essary.
â– To prevent incorrect opera-tion of the Automatic High
2Turn the fuel tank cap slowly and remove it, then hang it on the back of the fuel filler door.After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
WARNING
â—�Do not top off the fuel tank.
NOTICE
â– Refueling
Do not spill fuel during refueling.
Doing so may damage the vehi-cle, such as causing the emission
control system to operate abnor-
mally or damaging fuel system components or the vehicle’s
painted surface.
Opening the fuel tank capClosing the fuel tank cap
WARNING
â– When replacing the fuel tank
cap
Do not use anything but a genu-ine Toyota fuel tank cap designed for your vehicle. Doing so may
COROLLA_U4Drivingâ– If a warning message is displayed on the multi-information disp lay
A system may be tempor arily unavailable or there may be a malfu nction in
the system.
â—�In the following situations, perform the actions specified in t he table. When
the normal operating conditions are detected, the message will disappear
and the system will be come operational.
If the message does not disapp ear, contact your Toyota dealer.
Situation Actions
When the area around a sensor is
covered with dirt, moisture (fogged up, covered with condensation, ice, etc.), or other foreign matterTo clean the part of the windshield in front of the front camera, use the
windshield wipers or the windshield defogger of the air conditioning sys-tem (ï‚®P.387, 392).
COROLLA_Uâ—�In the following situations, if th e situation has changed (or t he vehicle has
been driven for some time) and the normal operating conditions are
detected, the message will disappear and the system will become opera-
tional.
If the message does not disapp ear, contact your Toyota dealer.
• When the temperature around the radar sensor is outside of the opera-
tional range, such as when the vehicle is in the sun or in an e xtremely cold
environment
• When the front camera cannot d etect objects in front of the ve hicle, such
as when driving in the dark, sno w, or fog, or when bright light s are shining
into the front cameraWhen the temperature around the
front camera is out side of the opera-
tional range, such as when the vehi-cle is in the sun or in an extremely
cold environmentIf the front camera is hot, such as after the vehicle had been parked in the sun, use the air conditioning sys-tem to decrease the temperature around the front camera.
If a sunshade was used when the
vehicle was parked, depending on its type, the sunlight r eflected from the
surface of the sunshade may cause the temperature of the front camera to become exce ssively high.
If the front camera is cold, such after the vehicle is parked in an extremely cold environment, use the air condi-tioning system to increase the tem-perature around the front camera.
The area in front of the front camera is obstructed, such as when the hood is open or a sticker is attached to the part of the windshield in front of the front camera.
Close the hood, remove the sticker, etc. to clear the obstruction.Situation Actions
that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi-information display to urge the driver to take evasive action.
â– Pre-collision brake assist
When the system determines that the possibility of a frontal collision is high, the system applies greater braking force in relation to how strongly the brake pedal is depressed.
â– Pre-collision braking
If the system determines that the possibility of a frontal colli-sion is extremely high, the brakes are automatically applied to help avoid the collision or reduce the impact of the colli-sion.PCS (Pre-Collision Sys-
tem)
The pre-collision system
uses a radar sensor and front camera to detect objects ( ï‚®P.190) in front of
the vehicle. When the sys-tem determines that the possibility of a frontal colli-sion with an object is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision. If the system determines that the possi-bility of a frontal collision with an object is extremely high, the brakes are auto-matically applied to help avoid the collision or help reduce the impact of the col-lision.
The pre-collision system can be disabled/enabled and the warning timing can be changed. ( ï‚®P.189)
essary by operating the steering wheel in small amounts for a short period of time to keep the vehicle in its lane.
If the system detects that the steer-
ing wheel has not been operated
for a fixed amount of time or the steering wheel is not being firmly gripped, a warning is displayed on the multi-information display and the function is t emporarily can-
celed.
Vehicles with a Blind Spot Monitor:
When the system de termines that
the vehicle might depart from its lane and that the possibility of a col-lision with an over taking vehicle in
the adjacent lane is high, the steer-ing assist function will operate even if the turn signals are operating.
*: Boundary between asphalt and
the side of the road, such as grass, soil, or a curbâ– Vehicle sway warning func-
tion
When the vehicle is swaying within a lane, the warning buzzer will sound and a mes-sage will be displayed on the multi-information display to alert the driver.
dynamic radar cruise control with full-speed range and pro-vides the required assistance by operating the steering wheel to keep the vehicle in its current lane.
When dynamic radar cruise control
with full-speed range is not operat-
ing, the lane centering function does not operate.
In situations where the white (yel-
low) lane lines are difficult to see or are not visible, such as when in a traffic jam, this function will operate to help follow a preceding vehicle by monitoring the position of the preceding vehicle.
If the system detects that the steer-
ing wheel has not been operated for a fixed amount of time or the steering wheel is not being firmly gripped, a warning is displayed on the multi-information display and the function is temporarily can-celed.
Press the LTA switch to turn the
LTA system on.
The LTA indicator illuminates and a
message is displayed on the multi-information display.
Press the LTA swit ch again to turn
the LTA system off.
When the LTA system is turned on
or off, operation of the LTA system continues in the same condition the next time the engine is started.Turning LTA system on
ing wheel has not been operated for a fixed amount of time or the steering wheel is not being firmly gripped, a warning is displayed on the multi-information display and the function is t emporarily can-
celed.
Vehicles with a Blind Spot Monitor:
When the system de termines that
the vehicle might depart from its lane and that the possibility of a col-lision with an over taking vehicle in
the adjacent lane is high, the steer-ing assist function will operate even if the turn signals are operating.
*: Boundary between asphalt and
the side of the road, such as grass, soil, or a curb
â– Vehicle sway warning func-
tion
When the vehicle is swaying within a lane, the warning buzzer will sound and a mes-sage will be displayed on the multi-information display to alert the driver.
Press the LDA switch to turn the
LDA system on.
The LDA indicator illuminates and a
message is displayed on the multi-information display.
Press the LDA swit ch again to turn
the LDA system off.
When the LDA system is turned on
or off, operation of the LDA system continues in the same condition the next time the engine is started.Turning LDA system on
the LDA system off, wait for a little while, and then turn the LDA system
back on.
�“LDA Unavailable at Current Speed�
The function cannot be used as the vehicle speed exceeds the LDA
operation range. Drive slower.
�“LDA Unavailable Below Approx. 32MPH�
The LDA system cannot be used as the vehicle spee d is less than
approximately 32 mph (50 km/h).
Drive the vehicle at approximately
32 mph (50 km/h) or more.
â– If a battery terminal has been disconnected and reconnected
The system needs to be initialized.
To initialize the system, drive the
vehicle straight ahead for 5 seconds
or more at a speed of approximately 22 mph (35 km/h) or more.
â– Customization
Function settings can be changed. (ï‚®P.548)*: If equipped
â– Meter display
Multi-information displayDynamic radar cruise
control with full-speed range
*
In vehicle-to-vehicle dis-
tance control mode, the vehicle automatically accel-erates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelera-tor pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.
Use the dynamic radar cruise control with full-speed range on free-ways and highways.
�Vehicle-to-vehicle distance control mode ( P.216)
COROLLA_UThis mode employs a radar to detect the presence of vehicles up to
approximately 328 ft. (100 m) ahead, determines the current veh i-
cle-to-vehicle following distance, and operates to maintain a s uitable
following distance from the vehicle ahead. The desired vehi-cle-to-vehicle distance can also be set by operating the vehi-cle-to-vehicle distance switch.
When driving on downhill slopes, t he vehicle-to-vehicle distanc e may
become shorter.
Example of constant speed cruisingWhen there are no vehicles ahead
The vehicle travels at the speed set by the driver.
Example of deceleration crui sing and follow-up cruising
When a preceding vehicle driving slower than the set speed appears
When a vehicle is detected runni ng ahead of you, the system aut omatically
decelerates your vehicle. When a greater reduction in vehicle s peed is nec-
essary, the system applies the brakes (the stop lights will com e on at this
time). The system will respond to changes in the speed of the vehicle
ahead in order to maintain the vehicle-to-vehicle distance set by the driver.
Approach warning warns you when the system cannot decelerate su ffi-
ciently to prevent your vehicle from closing in on the vehicle ahead.
When the vehicle ahead of you st ops, your vehicle will also sto p (vehicle is
stopped by system control). Afte r the vehicle ahead starts off, pressing the
“+RES� switch or depressing the accelerator pedal (start-off operation) will
resume follow-up cruising. If the start-off operation is not pe rformed, system
control continues to keep your vehicle stopped.Driving in vehicle-to-vehicle distance control mode
COROLLA_U4DrivingWhen the turn signal lever is operated and your vehicle moves t o a left lane
while driving at 50 mph (80 km/h ) or more, the vehicle will qui ckly acceler-
ate to help to overtake a passing vehicle.
Example of acceleration
When there are no longer any preceding vehicles driving slower than the set speed
The system accelerates until the set speed is reached. The syst em then
returns to constan t speed cruising.
1Press the cruise control main switch to activate the cruise control.
Dynamic radar cruise control indi-
cator will come on and a message
will be displayed on the multi-infor-
mation display. Press the switch again to deactivate the cruise con-trol.
If the cruise cont rol main switch is
pressed and held for 1.5 seconds
or more, the syste m turns on in
constant speed control mode. (ï‚®P.220)
2Accelerate or decelerate,
with accelerator pedal opera-tion, to the desired vehicle speed (at or above approxi-mately 20 mph [30 km/h]) and press the “-SET� switch to set the speed.Cruise control “SET� indicator will
come on.
The vehicle speed at the moment
the switch is released becomes the set speed.
To change the set speed, press
the “+RES� or “-SET� switch until the desired set speed is displayed.
1Increases the speed (Except
when the vehicle has been stopped by system control in Setting the vehicle speed
below. Note that the distances shown correspond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle distance increases/decreases in accor-dance with vehicle speed. When the vehicle is stopped by system control, the vehicle stops at a certain vehicle-to-vehicle dis-tance depending on the situa-tion.
After the vehicle ahead of you
starts off, press the “+RES� switch.
Your vehicle will also resume
follow-up cruising if the acceler-ator pedal is depressed after the vehicle ahead of you starts off.
1Pressing the cancel switch
cancels the speed control.
The speed control is also canceled
when the brake pedal is depressed. (When the vehicle has been stopped by system control, depressing the br ake pedal does
not cancel the setting.)
2Pressing the “+RES� switch
resumes the cruise control and returns vehicle speed to the set speed.
When your vehicle is too close Vehicle-to-vehicle dis-
tance settings (vehi-
cle-to-vehicle distance control mode)
Distance
optionsVehicle-to-vehicle dis-
tance
LongApproximately 160 ft.
(50 m)
MediumApproximately 130 ft.
(40 m)
ShortApproximately 100 ft.
(30 m)
Resuming follow-up cruising when the vehicle has been stopped by sys-
tem control (vehi-
cle-to-vehicle distance control mode)Canceling and resuming
cient automatic deceleration via the cruise control is not possi-ble, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehicle. Depress the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
â– Warnings may not occur when
In the following instances, warn-ings may not occur even when the vehicle-to-vehicle distance is small.
�When the speed of the pre-
ceding vehicle matches or exceeds your vehicle speed
�When the preceding vehicle is traveling at an extremely slow speed
�Immediately after the cruise control speed was set
�When depressing the acceler-ator pedalWhen constant speed control mode is selected, your vehicle will maintain a set speed without controlling the vehicle-to-vehi-cle distance. Select this mode only when vehicle- to-vehicle dis-
tance control mode does not function correctly due to a dirty radar, etc.
1With the cruise control off,
press and hold the cruise control main switch for 1.5 seconds or more.
Immediately after the switch is
pressed, the dynamic radar cruise
control indicator will come on. After-wards, it switches to the cruise con-
trol indicator.
Switching to const ant speed control
mode is only possible when operat-
ing the switch with the cruise con-trol off.
2Accelerate or decelerate,
with accelerator pedal opera-tion, to the desired vehicle speed (at or above approxi-mately 20 mph [30 km/h]) and press the “-SET� switch to set the speed.
COROLLA_U4Drivingâ—�When steering wheel operation or
your position in t he lane is unsta-
ble
â—�When the vehicle ahead of you
decelerates suddenly
â—�When driving on a road sur-rounded by a structure, such as in
a tunnel or on a bridge
â—�While the vehicle speed is decreasing to the set speed after the vehicle accelerates by
depressing the accelerator pedal*: If equipped
â– Meter display
Multi-information display
Set speed
IndicatorsDynamic radar cruise
control*
In vehicle-to-vehicle dis-
tance control mode, the vehicle automatically accel-erates and decelerates to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.
Use the dynamic radar cruise control on freeways and highways.
�Vehicle-to-vehicle distance control mode ( P.226)
COROLLA_UThis mode employs a radar to detect the presence of vehicles up to
approximately 328 ft. (100 m) ahead, determines the current veh i-
cle-to-vehicle following distance, and operates to maintain a s uitable
following distance from the vehicle ahead. The desired vehi-cle-to-vehicle distance can also be set by operating the vehi-cle-to-vehicle distance switch.
When driving on downhill slopes, t he vehicle-to-vehicle distanc e may
become shorter.
Example of constant speed cruisingWhen there are no vehicles ahead
The vehicle travels at the speed set by the driver.
Example of deceleration crui sing and follow-up cruising
When a preceding vehicle driving slower than the set speed appears
When a vehicle is detected runni ng ahead of you, the system aut omatically
decelerates your vehicle. When a greater reduction in vehicle s peed is nec-
essary, the system applies the brakes (the stop lights will com e on at this
time). The system will respond to changes in the speed of the vehicle
ahead in order to maintain the vehicle-to-vehicle distance set by the driver.
Approach warning warns you when the system cannot decelerate su ffi-
ciently to prevent your vehicle from closing in on the vehicle ahead.
When the turn signal lever is operated and your vehicle moves t o a left lane
while driving at 50 mph (80 km/h ) or more, the vehicle will qui ckly acceler-
ate to help to overtake a passing vehicle.
Example of accelerationDriving in vehicle-to-vehicle distance control mode
COROLLA_U4DrivingWhen there are no longer any preceding vehicles driving slower
than the set speed
The system accelerates until the set speed is reached. The syst em then
returns to constan t speed cruising.
1Press the cruise control main switch to activate the cruise control.
Dynamic radar cruise control indi-
cator will come on and a message
will be displayed on the multi-infor-
mation display. Press the switch again to deactivate the cruise con-trol.
If the cruise cont rol main switch is
pressed and held for 1.5 seconds
or more, the syste m turns on in
constant speed control mode.
(ï‚®P.230)
2Accelerate or decelerate,
with accelerator pedal opera-tion, to the desired vehicle speed (at or above approxi-mately 20 mph [30 km/h]) and press the “-SET� switch to set the speed.
Cruise control “SET� indicator will
come on.
The vehicle speed at the moment
the switch is released becomes the set speed.
To change the set speed, press
the “+RES� or “-SET� switch until the desired set speed is displayed.
1Increases the speed
2Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold
the switch to cha nge the speed,
and release when the desired speed is reached.
In the vehicle-to-vehicle dis-
tance control mode, the set speed will be increased or Setting the vehicle speed
below. Note that the distances shown correspond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle distance increases/decreases in accor-dance with vehicle speed.Changing the vehi-
resumes the cruise control and returns vehicle speed to the set speed.
However, cruise control does not
resume when the vehicle speed is approximately 16 mph (25 km/h) or less.
When your vehicle is too close
to a vehicle ahead, and suffi-cient automatic deceleration via the cruise control is not possi-ble, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehicle. Depress the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
â– Warnings may not occur when
In the following instances, warn-ings may not occur even when the vehicle-to-vehicle distance is small.
�When the speed of the pre-
ceding vehicle matches or exceeds your vehicle speed
�When the preceding vehicle is traveling at an extremely slow speed
�Immediately after the cruise control speed was set
mode is selected, your vehicle will maintain a set speed without controlling the vehicle-to-vehi-cle distance. Select this mode only when vehicle-to-vehicle dis-tance control mode does not function correctly due to a dirty radar, etc.
1With the cruise control off,
press and hold the cruise control main switch for 1.5 seconds or more.
Immediately after the switch is
pressed, the dynamic radar cruise
control indicator will come on. After-wards, it switches to the cruise con-
trol indicator.
Switching to constant speed control
mode is only possible when operat-
ing the switch wit h the cruise con-
trol off.
2Accelerate or decelerate,
with accelerator pedal opera-tion, to the desired vehicle speed (at or above approxi-mately 20 mph [30 km/h]) and press the “-SET� switch to set the speed.
Cruise control “SET� indicator will come on.
The vehicle speed at the moment
the switch is released becomes the set speed.
Adjusting the speed setting:
ï‚®P.227
Canceling and resuming the speed setting: ï‚® P.229
â– Dynamic radar cruise control
can be set when
â—�Vehicles with a continuously vari-able transmission: The shift lever
is in D.
â—�Vehicles with a manual transmis-
sion: The shift lever is in range 2nd or higher.
â—�Depending on the control mode, this item can be set at the follow-
ing speeds.
• Vehicle-to-vehicle distance con-
trol mode: Approximately 20 mph (30 km/h) or more
• Constant speed control mode:
Approximately 20 mph (30 km/h)
or more
â– Accelerating after setting the
vehicle speed
The vehicle can a ccelerate by oper-
ating the accelera tor pedal. After
accelerating, the set speed resumes. However, during vehi-
cle-to-vehicle distance control
mode, the vehicle speed may decrease below the set speed in
COROLLA_U4Driving*: If equipped When the front camera recog-
nizes a sign, the sign will be dis-played on the multi-information display.
�When the driving support sys-
tem information is selected, a maximum of 3 signs can be displayed. (ï‚® P.86)
�When a tab other than the driving support system infor-mation is selected, only a rec-ognized speed limit sign or do not enter sign (when notifica-tion is necessary) will be dis-played. ( P.86)
If signs other than speed limit signs
are recognized, t hey will be dis-
played in an overlapping stack under the current speed limit sign.RSA (Road Sign
Assist)*
The RSA system recognizes
specific road signs using the front camera to provide information to the driver via the display.
If the system judges that the vehicle is being driven over the speed limit, performing prohibited actions, etc. in relation to the recognized road signs, it alerts the driver using a warning dis-play and warning buzzer.
WARNING
â– Before using the RSA
Do not rely solely upon the RSA
system. RSA is a system which
supports the driver by providing
information, but it is not a replace-ment for a driver’s own vision and
awareness. Drive safely by
always paying careful attention to the traffic rules.Indication on the
signs, including electronic signs and blinking signs, are recog-nized.
A non-official or a recently intro-
duced traffic sign may not be recog-nized.
In the following situations, the
RSA system will alert the driver.
�When the vehicle speed
exceeds the speed warning threshold of the speed limit sign displayed, the sign dis-play will be emphasized and a buzzer will sound.
�When the RSA system recog-nizes a do not enter sign and determines that your vehicle has entered a no-entry area, the displayed sign will flash and a buzzer will sound.
Depending on the situation, traf-fic environment (traffic direction, speed unit) may be detected incorrectly and a warning dis-play may not operate properly.
â– Setting procedure
1Press or of the meter
control switch es and select
2Press or of the meter
control switch es and select
, then press
â– Automatic turn-off of RSA sign
display
In the following si tuations, a dis-
played speed limit sign will stop
being displayed automatically:
â—�A new sign is not recognized for a certain distance.
â—�The road changes due to a left or
right turn, etc.
In the following situ ations, do not
enter, stop and yie ld signs will stop
being displayed automatically:
â—�The system determines that your
vehicle has passed the sign.
â—�The road changes due to a left or right turn, etc.
â– Conditions in which the func-
tion may not operate or detect correctly
In the following si tuations, RSA
does not operate normally and may
not recognize signs, display the
incorrect sign, etc. However, this does not indicate a malfunction.
â—�The front camera is misaligned due to a strong impact being
applied to the sensor, etc.
â—�Dirt, snow, stickers, etc. are on the windshield near the front camera.Supported types of road
mirrors or approaching rapidly from behind into a blind spot, the outside rear view mirror indicator on the detected side will illuminate. If the turn signal lever is operated toward the detected side, the outside rear view mirror indicator flashes.
BSM indicator
Illuminates when the Blind Spot Monitor is enabled
â– Outside rear vie w mirror indica-
tor visibility
In strong sunlight, the outside rear
view mirror indicator may be difficult
to see.
■When “Blind Spot Monitor
Unavailable� is shown on the multi-information display
Ice, snow, mud, etc., may be attached to the rear bumper around the sensors. ( ï‚®P.238) The system
should return to normal operation after removing the ice, snow, mud, etc. from the rear bumper. Addition-
ally, the sensors may not operate BSM (Blind Spot Moni-
tor)*
The Blind Spot Monitor is a
system that uses rear side radar sensors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when changing lanes.
WARNING
â– Cautions regarding the use of
the system
The driver is solely responsible for safe driving. Always drive safely,
taking care to o bserve your sur-
roundings.
The Blind Spot Monitor is a sup-
plementary function which alerts the driver that a v ehicle is in a
blind spot of the outside rear view mirrors or is approaching rapidly from behind into a blind spot. Do
not overly rely on the Blind Spot Monitor. As the function cannot judge if it is safe to change lanes,
over reliance could lead to an
accident resulting in death or seri-ous injury.
As the system may not function
correctly under certain condi-
tions, the driver’s own visual con-
firmation of safety is necessary.System components
Blind Spot Monitor sensors are installed behind t he left and right
sides of the rear bumper respec-
tively. Observe the following to
ensure the Blind Spot Monitor can operate correctly.
â—�Keep the sensors and the sur-rounding areas on the rear
bumper clean at all times.
If a sensor or its surrounding area
on the rear bumper is dirty or cov-ered with snow, the Blind Spot Monitor may not operate and a warning message ( ï‚®P.236) will
be displayed. In this situation, clear off the dirt or snow and drive the vehicle with the operation con-ditions of the BSM function (ï‚®P.240) satisfied for approxi-
mately 10 minutes. If the warning message does not disappear, have the vehicle inspected by your Toyota dealer.
â—�Do not attach accessories,
stickers (including transparent stickers), aluminum tape, etc. to
a sensor or its surrounding area
on the rear bumper.â—�Do not subject a sensor or its
surrounding area on the rear
bumper to a strong impact.If a sensor is moved even
slightly off position, the system
may malfunction and vehicles may not be detected correctly.
In the following si tuations, have
your vehicle inspected by your
Toyota dealer.
• A sensor or its surrounding area
is subject to a strong impact.
• If the surrounding area of a sen-
sor is scratched or dented, or part of them h as become dis-
connected.
â—�Do not disassemble the sensor.
â—�Do not modify the sensor or sur-
rounding area on the rear
bumper.
â—�If a sensor or the rear bumper needs to be removed/installed
or replaced, contact your Toyota
dealer.
â—�Do not paint the rear bumper any color other t han an official
lane, and the vehicle in an adja-cent lane is far away from your
vehicle
• When an accessory (such as a
bicycle carrier) is installed to the
rear of the vehicle
• When there is a significant differ-
ence in height between your vehi-cle and the vehicle that enters the
detection area
• Immediately after the Blind Spot
Monitor is turned on
â—�Instances of the Blind Spot Moni-
tor unnecessarily d etecting a vehi-
cle and/or object may increase in
the following situations:
• When the sensor is misaligned
due to a strong impact to the sen-sor or its surrounding area
• When the distanc e between your
vehicle and a guar drail, wall, etc.
that enters the detection area is
short
• When driving up and down con-
secutive steep inclines, such as hills, dips in the road, etc.
• When vehicle lanes are narrow, or
when driving on the edge of a lane, and a vehicle traveling in a
lane other than the adjacent lanes enters the detection area
• When driving on roads with sharp
bends, consecutive curves, or uneven surfaces
• When the tires are slipping or
spinning
• When the distanc e between your
vehicle and a following vehicle is short
• When an accessory (such as a
bicycle carrier) is installed to the rear of the vehicle
The rear view image is dis-
played when the shift lever is in R and the engine switch is in ON.Rear view monitor sys-
tem
�Entune Audio
The rear view monitor sys-
tem assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking.
The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
�Entune Audio Plus or Entune Premium Audio
Owners of models equipped with a navigation/multime-dia system should refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL�.
displays an image of the view from the bumper of the rear area of the vehicle.
The image adjustment proce-
dure for the rear view monitor system screen is the same as the procedure for adjusting the screen. ( ï‚®P.274)
�The area displayed on the screen may vary according to vehicle orientation conditions.
�Objects which are close to either corner of the bumper or under the bumper cannot be displayed.�The camera uses a special lens. The distance of the image that appears on the screen differs from the actual distance.
�Items which are located higher than the camera may not be displayed on the moni-tor.
â– Rear view monitor system camera
The camera for the rear view monitor system is located as shown in the illustration.
�Using the camera
If dirt or foreign matter (such as
water droplets, snow, mud etc.) is
adhering to the camera, it cannot transmit a clear image. In this case, flush it with a large quantity of water and wipe the camera lens clean with a soft and wet cloth.
â– Differences between the
screen and the actual road
The distance guide lines and the vehicle width guide lines may not actually be parallel with the dividing lines of the parking space, even when they appear Rear view monitor system
cle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they appear to be so. Be sure to check visually.
The distance guide lines give a
distance guide for flat road sur-faces. In any of the following sit-uations, there is a margin of error between the fixed guide lines on the screen and the actual distance/course on the road.
�When the ground behind the
vehicle slopes up sharply
The distance guide lines will appear
to be closer to the vehicle than the actual distance. Because of this, objects will appear to be farther away than they actually are. In the same way, there will be a margin of error between the guide lines and the actual distance/course on the road.
�When the ground behind the
vehicle slopes down sharply
The distance guide lines will appear
to be further from the vehicle than
the actual distance. Because of
this, objects will appear to be closer than they actually are. In the same way, there will be a margin of error
between the guide lines and the actual distance/course on the road.
due to the number of passengers or the distribution of t he load, there is
a margin of error between the fixed
guide lines on the screen and the actual distance/course on the road.
â– When approaching
three-dimensional objects
The distance guide lines are dis-played according to flat surfaced objects (such as the road). It is not possible to determine the position of three-dimensional objects (such as vehicles) using the distance guide lines. When approaching a three-dimen-sional object that extends out-ward (such as the flatbed of a truck), be careful of the follow-ing.
the case shown below, the truck appears to be outside of the vehicle width guide lines and the vehicle does not look as if it hits the truck. However, the rear body of the truck may actually cross over the vehicle width guide lines. In reality if you
back up as guided by the vehicle width guide lines, the vehicle may hit the truck.
ï‚·The temperature around the lens is either high or low
ï‚·The outside tempera-ture is low
ï‚·There are water drop-lets on the camera
ï‚·It is raining or humid
ï‚·Foreign matter (mud etc.) is adhering to the camera
ï‚·Sunlight or headlights are shining directly into the camera
The vehicle is under fluorescent lights, sodium lights, mer-cury lights etc.If this happens due to these causes, it does not indicate a malfunc-tion. Back up while visu-ally checking the vehicle’s surroundings. (Use the monitor again once conditions have been improved.) The procedure for adjusting the picture quality of the rear view monitor sys-tem is the same as the procedure for adjusting the screen. ( P.274)
The image is blurryDirt or foreign matter (such as water droplets, snow, mud etc.) is adhering to the camera.Flush the camera with a large quantity of water and wipe the camera lens clean with a soft and wet cloth.
The image is out of alignmentThe camera or sur-rounding area has received a strong impact. Have the vehicle inspected by your Toy-ota dealer.
The fixed guide lines are very far out of alignmentThe camera position is out of alignment.Have the vehicle inspected by your Toy-ota dealer.
ï‚·The vehicle is tilted (there is a heavy load on the vehicle, tire pressure is low due to a tire puncture, etc.)
ï‚·The vehicle is used on an incline.If this happens due to these causes, it does not indicate a malfunc-tion.
system changes between sport mode and normal mode.
1Normal mode
Provides an optimal balance of fuel economy, quietness, and dynamic performance. Suitable for normal driving.
2Sport mode
Controls the transmission and engine to provide quick, powerful acceleration. This mode also changes the steering feel, making it suitable for when agile driving response is desire d, such as when
driving on roads w ith many curves.
When the sport mode is selected, sport mode indicator comes on.
â– Automatic deactivation of sport
mode
If the engine switch is turned off after driving in sport mode, the drive NOTICE
• When cleaning the camera lens,
flush the camera with a large
quantity of water and wipe it
with a soft and wet cloth.
Strongly rubbing the camera lens may cause the camera lens
to be scratched and unable to
transmit a clear image.
• Do not allow organic solvent,
car wax, window cleaner or glass coating to adhere to the
camera. If this happens, wipe it
off as soon as possible.
• If the temperature changes rap-
idly, such as when hot water is
poured on the vehicle in cold
weather, the system may not operate normally.
• When washing the vehicle, do
not apply intensive bursts of water to the camera or camera area. Doing so may result in the
camera malfunctioning.
â—�Do not expose the camera to
strong impact as this could
cause a malfunction. If this hap-pens, have the vehicle
inspected by your Toyota dealer as soon as possible.Driving mode select
Helps to prevent wheel lock when the brakes are applied suddenly, or if the brakes are applied while driving on a slip-pery road surface
â– Brake assist
Generates an increased level of braking force after the brake pedal is depressed when the system detects a panic stop sit-uation
â– VSC (Vehicle Stability Con-trol)
Helps the driver to control skid-ding when swerving suddenly or turning on slippery road sur-faces.Driving assist systems
To keep driving safety and performance, the following systems operate automati-cally in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when oper-ating the vehicle.
Provides cooperative control of the ABS, TRAC, VSC and EPS.Helps to maintai n directional
stability when swerving on slip-pery road surfaces by con-trolling steering performance.
â– TRAC (Traction Control)
Helps to maintain drive power and prevent the drive wheels from spinning when starting the vehicle or accelerating on slip-pery roads
â– Active Cornering Assist (ACA)
Helps to prevent the vehicle from drifting to the outer side by performing inner wheel brake control when attempting to
accelerate while turning
â– Hill-start assist control
Helps to reduce the backward
movement of the vehicle when starting on an uphill
â– EPS (Electric Power Steer-ing)
Employs an electric motor to reduce the amount of effort needed to turn the steering wheel.
â– The Secondary Collision Brake
When the SRS airbag sensor detects a collision and the sys-tem operates, the brakes and brake lights are automatically controlled to reduce the vehicle speed and help reduce the pos-sibility of further damage due to a secondary collision.
â– When the TRAC/VSC systems
are operating
The slip indicator light will flash while the TRAC/VSC systems are
�Have the vehicle fitted with four snow tires or purchase a set of tire chains for the front tires.
Ensure that all tires are the same
size and brand, and that chains
match the size of the tires.Winter driving tips
Carry out the necessary
preparations and inspec-tions before driving the vehicle in winter. Always drive the vehicle in a man-ner appropriate to the pre-vailing weather conditions.
Pre-winter preparations
WARNING
â– Driving with snow tires
Observe the following precautions
to reduce the risk of accidents.
Failure to do so m ay result in a
loss of vehicle control and cause
death or serious injury.
â—�Use tires of the size specified.
â—�Maintain the recommended
level of air pressure.â—�Do not drive in excess of 75 mph (120 km/h), regardless of
the type of snow tires being used.
â—�Use snow tires on all, not just
some wheels.
â– Driving with tire chains
Observe the following precautions to reduce the risk of accidents.
Failure to do so may result in the vehicle being unable to be driven
safely, and may cause death or
serious injury.
â—�Do not drive in excess of the speed limit specifi ed for the tire
chains being used, or 30 mph (50 km/h), whichever is lower.
â—�Avoid driving on bumpy road
surfaces or over potholes.
â—�Avoid sudden acceleration,
abrupt steering, sudden brak-
ing and shifting operations that cause sudden engine braking.
â—�Slow down sufficiently before
entering a curve to ensure that
vehicle control is maintained.
â—�Do not use LTA (Lane Tracing Assist) system. (if equipped)
â—�Do not use LDA (Lane Depar-
ture Alert with steering control) system. (if equipped)
NOTICE
â– Repairing or replacing snow
tires (vehicles with a tire pres-
sure warning system)
Request repairs or replacement of snow tires from Toyota dealers or legitimate tire retailers.
This is because the removal and
attachment of snow tires affects the operation of the tire pressure
window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
�To ensure proper operation of the climate control system fan, remove any snow that has accumulated on the air inlet vents in front of the wind-shield.
�Check for and remove any excess ice or snow that may have accumulated on the exterior lights, vehicle’s roof, chassis, around the tires or on the brakes.
�Remove any snow or mud from the bottom of your shoes before getting in the vehicle.
Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suit-able to road conditions.
�Park the vehicle and shift the
shift lever to P (continuously variable transmission), or 1 or R (manual transmission) without setting the parking brake. The parking brake may freeze up, preventing it from being released. If the vehicle is parked without setting the parking brake, make sure to block the wheels.Failure to do so may be dan-gerous because it may cause the vehicle to move unexpect-edly, possibly leading to an accident.
�Vehicles with a continuously variable transmission: If the vehicle is parked without set-ting the parking brake, con-firm that the shift lever cannot
be moved out of P
*.
*: The shift lever will be locked if it is
attempted to be sh ifted from P to
any other position without
depressing the brake pedal. If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehi-cle inspected by your Toyota dealer immediately.
Use the correct tire chain size
when mounting the tire chains.Chain size is regulated for each
Regulations regarding the use of tire chains vary depending on location and type of road. Always check local regulations before installing chains.
â– Tire chain installation
Observe the following precautions
when installing and removing chains:
â—�Install and remove tire chains in a safe location.
â—�Install tire chains on the front tires only. Do not install tire chains on the rear tires.â—�Install tire chains on the front tires as tightly as possible. Retighten
chains after driving 1/4 1/2 mile
(0.51.0 km).
â—�Install tire chains following the
instructions provided with the tire chains.
Regulations on the use of
tire chainsNOTICE
â– Fitting tire chains (vehicles
with a tire pressure warning system)
The tire pressure warning valves and transmitters may not function correctly when tire chains are fit-
darker and moving images may be slightly distorted when the
screen is cold.
â—�In extremely cold conditions, the screen may not be displayed and
the data input b y a user may be
deleted. Also, the screen buttons
may be harder than usual to
depress.
â—�When you look at the screen through polarized material such as polarized sunglasses, the screen
may be dark and hard to see. If
so, look at the scr een from differ-
ent angles, adjust the screen set-
tings on the display settings
screen or take off your sun-
glasses.
â—�When is displayed on the
screen, select to return to the
previous screen.
The operable areas of the
capacitive touch screen buttons use capacitive touch sensors and may not operate properly in the following situations:
�If the screen is dirty or wet�If a source of strong electro-
magnetic waves is brought near the screen
�If a glove is worn during oper-ation
�If the screen is touched by a fingernail
�If a stylus is used to operate the buttons
�If your palm touches the oper-able area of another button during operation
�If a button is touched quickly
�If the operable part of a capacitive touch screen but-ton is touched by or covered with a metal object, such as the following, it may not oper-ate properly:
• Magnetic isolation cards
• Metallic foil, such as the inner
packaging of a cigarette box
• Metallic wallets or bags
•C o i n s
• Discs, such as a CD or DVD
�If the operable part of a
capacitive touch screen but-ton is wiped, it may operate unintentionally.
�If the capacitive touch screen button is being touched when the engine switch is changed to ACC or ON, the button may not operate properly. In this case, remove anything touch-ing the button, turn the engine switch off and then turn it to NOTICE
â—�To prevent damaging the
screen, lightly touch the screen
buttons with your finger.
â—�Do not use objects other than
your finger to touch the screen.
â—�Wipe off fingerprints using a glass cleaning cloth. Do not use
Depending on the screen being dis-played, it may not be possible to
change keyboard characters.
When text is input, the system
predicts the text that may com-plete the currently unconfirmed text and displays predictive replacement candidates that match the beginning of the text.1Input text.
2Select the desired candidate.
To select a candidate that is not
displayed, select , and
then select the desired predic-
tive replacement candidate.
The list screen may be dis-
played after entering characters. When a list is displayed, use the appropriate screen button to scroll through the list.Changing character type
The contrast and brightness of the screen display and the image of the camera dis-play can be adjusted. The screen can also be turned off, and/or changed to either day or night mode.
(For information regarding audio/visual screen adjust-ment: ï‚® P.305)
device in a different way (from phone setup screen)
ï‚®P.360
■Connecting a Bluetooth®
device in a different way
(from Bluetooth® audio
screen)
ï‚®P.318
â– Auto connection mode
To turn auto connection mode
on, set “Bluetooth Power� to on.
(P.285) Leave the Bluetooth®
device in a location where the
connection can be established.
�When the engine switch is in
ACC or ON, the system searches for a nearby regis-tered device.
�The system will connect with the registered device that was last connected, if it is nearby. When automatic connection priority is set to on and there is more than one registered
Bluetooth
® phone available,
the system will automatically connect to the Bluetooth
® phone with the highest prior-
ity. (ï‚®P.285)
â– Connecting manually
When the auto connection has failed or “Bluetooth Power� is turned off, it is necessary to con-
nect the Bluetooth
® device man-
ually.
1Display the Bluetooth® set-
tings screen. ( ï‚®P.280)
2Follow the steps in “Connect-
ing a Bluetooth® device� from
step 2. (ï‚®P.281)
â– Reconnecting the Blue-tooth
® phone
If a Bluetooth® phone is discon-
nected due to poor reception from the Bluetooth
® network
when the engine switch is in
ACC or ON, the system auto-matically reconnects the Blue-
Select to display hints for connecting to the vehicle via
Wi-Fi
®.
Select to make the access
point searchable/unsearch-able.
Select to check/change the
security protocol of the access point (for authentica-tion and encryption). (ï‚®P.290)
Select to change the access point name (SSID). (ï‚® P.290)
Select to change the Wi-Fi
®
connection channel (within the 2.4GHz frequency band). (ï‚®P.290)
If any settings have been changed,
it will be necessa ry to reset the
Wi-Fi® system to complete the
changes. To reset the Wi-Fi® sys-
tem, select “Yes� on the pop-up dis-
played after changing the settings.
When the Wi-Fi® Hotspot func-
tion is enabled, the system
checks for a valid Hotspot ser-vice subscription.
If a Hotspot service subscription
has not been started, start the Toyota Entune App Suite Con-nect application to activate the service subscription. (If the Toyota Entune App Suite Con-nect application has not been installed, install the application.)
Contact your Toyota dealer for
details about the Toyota Entune App Suite Connect application.
1Select “Password�.
2Check that the following
screen is displayed.
Displays the password
Select to display/hide the
entered password.
Select to change the pass-
word.
1Select “Change Password�.
2Enter the desired password and select “OK�.
When setting/changing a pass-
word, observe the following guide-
lines to help prevent the password from being cracked by a third party:
�Use an 8-character or longer
password consisting of letters Enabling/disabling the
characters will not be recog-nized by the system.)
�Change the password regu-larly.
�If you write the password down, do not leave it some-where where it would be visi-ble.
�Do not use the same or a sim-ilar password to that for other accounts.
�Avoid using easy to identify words, such as your vehicle’s model name or license plate number, simple dictionary words, or words with simple obfuscation, such as c@t (for cat), as your password.
1Select “Security�.
2Select the desired security protocol.
1Select “Access Point Name�.
2Enter the desired access point name (SSID) and select “OK�.
1Select “Channel�.2Check that the following screen is displayed.
Select to change the chan-
nel selection to auto-matic/manual.
When “Manual� is selected,
select to change the channel.
1Set “Select Channel� to “Manual�.
2Select “Channel Number�.
3Enter the desired channel number and select “OK�.
Channels 1 through 11 can be
selected.
■Wi-Fi® function operating hints
â—�If a connected device is taken out
of the Wi-Fi® connection area, the
connection will be severed.
â—�If the vehicle is d riven out of the
cellular communic ation coverage
area, connecting to the internet
via the Wi-Fi® Hotspot will not be
possible.
�If a Bluetooth® device is used
while a device is connected using Changing the security pro-
�If “Do Not Enable� is selected, an Apple CarPlay connection will not be established. In this case, the device can be oper-ated as a normal Apple device, such as an iPod.
�Depending on the device con-nected, it may take approxi-mately 3 to 6 seconds before an Apple CarPlay connection is established.
4Check that home screen of Apple CarPlay is displayed.
Select to display the home
screen of Apple CarPlay.Touch and hold to activate Siri.
Select to start the application.
User can use any iPhone application supported by Apple CarPlay.
Select to display the system
screen.
â—�When an Apple CarPlay connec-
tion is established, the function of some system bu ttons will change.
â—�When an Apple CarPlay connec-tion is established, some system functions, such as the following,
will be replaced by similar Apple
CarPlay function s or will become
unavailable:
• iPod (Audio Playback)Apple CarPlay*
Apple CarPlay allows some
applications, such as Map, Phone, and Music, to be used on the system.
When an Apple CarPlay connection is established, Apple CarPlay compatible applications will be dis-played on the system dis-play.
Compatible device
Apple iPhone (iOS Ver. 9.3 or later) that supports Apple CarPlay. For details, refer tohttps://www.apple.com/ios/
tion cannot be estab-lished.Check if the device supports Apple CarPlay.Check if Apple CarPlay is enabled on the con-nected device.For details, refer to https://www.apple.com/ios/carplay/
.
Check if “Apple CarPlay� on the general set-tings screen is set to on. ( P.296)
Check if the Lightning cable being used is certi-fied by Apple Inc., and i f it is securely con-
nected to the devic e and USB port.
When the iPhone is c onnected using a USB
hub, etc., an Apple CarPlay connection may not be established. Connect the lightning cable to USB the port directly.
After checking all of the above, try to establish an Apple CarPlay connection. ( ï‚®P.292)
When an Apple CarPlay connection is established and a video is being played, the video is not displayed, but audio is output through the sys-tem.
As the system is not designed to play video through Apple CarPlay, this is not a malfunc-tion.
Although an Apple Car-Play connection is estab-lished, audio is not output through the system.
The system may muted or the volume may be low. Increase the system volume.
The Apple CarPlay screen has artifacts and/or audio from Apple CarPlay has noise.Check if the Lightning cable being used to con-nect the device to th e system is damaged.
To check if the Lightning cable is damaged internally, connect the device to another sys-
tem, such as a PC, and check if the device is recognized by the conn ected system. (The
device should begin charging when connected.)
After checking all of the above, try to establish an Apple CarPlay connection. ( ï‚®P.292)
*: Applications not compatible with Apple CarPlay are application s installed
on the iPhone that are not disp layed on the Apple CarPlay scree n appli-
cation list. (such as visual voicemail)During Apple CarPlay
music application (Apple Music, Spotify, etc.) play-back, if the iPhone is operated to start and play audio from an application that is not compatible with
Apple CarPlay
* and the
onboard device volume is
changed, the audio of the incompatible application stops and the system resumes playback of the original music application.This operation is perfo rmed according to the
specification of the onboard device, this is not a malfunction.
After interrupt audio (such as navigation route guid-ance) is played from an application that is not compatible with Apple CarPlay while the onboard device is playing audio (FM/AM, CD, etc.), the system does not resume playback of the original audio (FM/AM, CD, etc.).This operation is perfo rmed according to the
specification of the onboard device, this is not a malfunction.
Manually change the audi o source by yourself.
Or, do not use applications that are not compat-
ible with Apple CarPlay.
* Due to some naviga-
tion applications are compatible from iOS 12,
update to the latest iOS and application ver-sions.Symptom Solution
COROLLA_U5Entune audioSelect to change the driver set-
tings. (ï‚®P.298)
�“Delete Personal Data�
Select to delete personal data.
(ï‚®P.298)
�“Software Update�
Select to update software versions.
For details, contact your Toyota dealer.
�“Software Update Setting�*2
Select to set software update set-ting. (ï‚®P.299)
�“Gracenote Database
Update�
Select to update Gracenote® data-
base versions. For details, contact
your Toyota dealer.
�“Software Information�
Select to display the software infor-mation. Notices related to third party software used in this product are enlisted. (This includes instruc-tions for obtaining such software, where applicable.)
�“SW Sensitivity Level�
Select to change the capacitive
touch screen button sensitivity to 1
(low), 2 (medium), or 3 (high).
*1:This function is not made avail-
able in some countries or areas.
*2:If equipped
1Display the general settings
screen. (ï‚® P.296)
2Select “Clock�.3Select the desired items to be set.
Select to change the time
zone. (ï‚® P.297)
Select to set daylight saving time on/off.
Select to set automatic
adjustment of the clock by GPS on/off.When set to off, the clock can be manually adjusted. (ï‚®P.297)
Select to set the 24 hour time format on/off.When set to off, the clock is displayed in 12 hour time for-mat.
1Select “Time Zone�.
2Select the desired time zone.
When “Auto Adjust by GPS� is turned off, the clock can be manually adjusted.
Press to turn the audio/visual system on and off. The system turns on in the last mode used. Turn this knob to adjust the vol-ume.1Press the “AUDIO� button.
2Select “Source� or press “AUDIO� button again.
3Select the desired source.
â—�Dimmed screen buttons cannot be
operated.
â—�When there are tw o pages, select
or to change the page.
â—�When an Apple Carplay connec-
tion is established, some system functions, such as the following,
will be replaced by similar Apple
CarPlay function or will become
unavailable*:
• iPod (Audio Playback)
• USB audio/USB video
• Bluetooth® audio
• Toyota Entune App Suite Connect
*: This function is not made avail-
able in some countries or areas.
1Display the audio source
selection screen. (ï‚® P.303)
2Select “Reorder�.Some basics
This section describes some of the basic features of the audio/visual system. Some information may not pertain to your system.
Your audio/visual system works when the engine switch is in ACC or ON.
NOTICE
To prevent the battery from being
discharged, do not leave the audio/visual system on longer
â—�If a USB hub is plugged-in, two devices can be connected at a
time.
â—�Even if a USB hub is used to con-nect more than two USB devices,
only the first two connected devices will be recognized.
â—�If a USB hub that has more than two ports is connected to the USB
port, devices connected to the
USB hub may not charge or be
inoperable, as the supply of cur-
rent may be insufficient.
1Display the audio control
screen. (ï‚® P.303)
2Select “Sound�.3Select the desired item to be set.
Select to set the tre-
ble/mid/bass. (ï‚® P.304)
Select to set the fader/bal-ance. (ï‚® P.305)
Select to set the automatic sound levelizer. ( ï‚®P.305)
â– Treble/Mid/Bass
How good an audio program sounds is largely determined by the mix of the treble, mid and bass levels. In fact, different kinds of music and vocal pro-grams usually sound better with different mixes of treble, mid and bass.
COROLLA_U5Entune audioSelect “+� or “-� to adjust
mid-pitched tones.
Select “+� or “-� to adjust
low-pitched tones.
â– Fader/Balance
A good balance of the left and right stereo channels and of the front and rear sound levels is also important.
Keep in mind that when listening
to a stereo recording or broad-cast, changing the right/left bal-ance will increase the volume of 1 group of sounds while decreasing the volume of another.
1Select “Fader/Balance�.
2Select the desired screen
button.
Select to adjust the sound
balance between the front and rear speakers.
Select to adjust the sound
balance between the left and right speakers.
â– Automatic sound levelizer (ASL)
The system adjusts to the opti-mum volume and tone quality according to vehicle speed to compensate for increased road noise, wind noise, or other noises while driving.
1Select “Automatic Sound
Levelizer�.
2Select “High�, “Mid�, “Low� or “Off�.
selected, a confirmation mes-sage appears. Select “Yes� and select “OK�.
�To change the preset station to a different one, select and hold the preset station.
The number of preset radio stations
displayed on the screen can be
changed. ( ï‚®P.323)
1Select “Station List�.
2Select “AM� or “FM�.
Select the desired program genre
when the genre selection screen is
displayed.
3Select the desired station.
â– Refreshing the station list
1Select “Refresh�.
“Cancel Refresh�: Select to can-
cel the refresh.
“Source�: Select to change to
another audio source while refreshing.
â—�The audio/visual system sound is
muted during refresh operation.â—�In some situations, it may take some time to update the station
list.
1Select “Options�.
2Select the desired item to be
set.
Analog FM only: Select to
display RBDS text mes-sages.
Select to scan for receivable
stations.
This audio/visual system is equipped with Radio Broadcast Data Systems (RBDS). RBDS mode allows text messages to be received from radio stations that utilize RBDS transmitters.
When RBDS is on, the radio can
do the following functions.• Only selecting stations of a
�The internet radio application screen is displayed.
�Perform operations accord-ing to the displayed applica-tion screen.
�For the instrument panel operation method:  P.303
�If a compatible phone is Internet radio
One of Toyota Entune App Suite Connect features is the ability to listen to inter-net radio. In order to use this service, a compatible phone and the system needs to be set up. For details: ï‚® P.379
Depending on the type of porta-ble player connected, some functions may not be available and/or the screen may look dif-ferently than shown in this man-ual.
When an Apple CarPlay con-
nection is established, Blue-
tooth
® audio will be suspended
and become unavailable*.
*: This function is not made avail-
able in some countries or areas.
Select to display the audio
source selection screen.
Select to return to the top
screen.
Select to display a song list
screen.
Select to display the play
mode selection screen.
Select to display the portable
device connection screen. (ï‚®P.318)
Select to display the sound setting screen. (ï‚® P.304)
Select to set repeat playback. (ï‚®P.318)
Select to change the track.Select and hold to fast rewind.WARNING
â—�Your audio unit is fitted with
Bluetooth® antennas. People
with implantable cardiac pace-
makers, cardiac resynchroniza-tion therapy-pacemakers or
implantable cardioverter defibril-
lators should maintain a reason-able distance between
themselves and the Bluetooth
®
antennas. The radio waves may
affect the operation of such devices.
�Before using Bluetooth®
devices, users of any electrical medical device other than
implantable cardiac pacemak-
ers, cardiac resynchronization therapy-pacemakers or implant-
able cardioverter defibrillators
should consult the manufacturer
of the device for information
about its operation under the
influence of radio waves. Radio waves could have unexpected
COROLLA_U5-10.Tips for operating the audio/visual system
The use of a cellular phone inside or
near the vehicle may cause a noise
from the speakers of the audio/visual system which you are
listening to. However, this does not indicate a malfunction.
Usually, a problem with radio
reception does not mean there is a problem with the radio  it
is just the normal result of condi-tions outside the vehicle.
For example, nearby buildings
and terrain can interfere with FM reception. Power lines or phone wires can interfere with AM sig-nals. And of course, radio sig-
nals have a limited range. The
farther the vehicle is from a sta-tion, the weaker i ts signal will
be. In addition, reception condi-tions change constantly as the vehicle moves.
Here are some common recep-
tion problems that may not indi-cate a problem with the radio as described.
â– FM
Fading and drifting stations: Generally, the effective range of FM is about 25 miles (40 km). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmitter. They are often accompanied by dis-tortion.
Multi-path: FM signals are
reflective, making it possible for 2 signals to reach the vehicle’s antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception.
Static and fluttering: These
occur when signals are blocked by buildings, trees or other large objects. Increasing the bass level may reduce static and flut-tering.
Station swapping: If the FM sig-
nal being listened to is inter-rupted or weakened, and there is another strong station nearby on the FM band, the radio may tune in the second station until the original signal can be picked up again.
â– AM
Fading: AM broadcasts are reflected by the upper atmo-sphere  especially at night.
These reflected signals can interfere with those received directly from the radio station, causing the radio station to sound alternately strong and weak.Operating information
COROLLA_U5Entune audioStation interference: When a
reflected signal and a signal received directly from a radio station are very nearly the same frequency, they can interfere with each other, making it diffi-cult to hear the broadcast.
Static: AM is easily affected by
external sources of electrical noise, such as high tension power lines, lightening or electri-cal motors. This results in static.
â– Certification
�Use of the Made for Apple badge means that an acces-sory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been cer-tified by the developer to meet Apple performance stan-dards. Apple is not responsi-ble for the operation of this device or its compliance with safety and regulatory stan-dards. Please note that the use of this accessory with an Apple product may affect wireless performance.
�iPhone, iPod, iPod classic, iPod nano, iPod touch, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
COROLLA_U5Entune audio*1:Only compatible with Windows
Media Audio Standard
*2:Sound source of 48kHz or more
is down-converted to
48kHz/24bit.
*1:Variable Bit Rate (VBR) compati-
ble
*2:Only compatible with Windows
Media Audio Standard�MP3 (MPEG Audio Layer 3),
WMA (Windows Media Audio) and AAC (Advanced Audio Coding) are audio compres-sion standards.
�This system can play MP3/WMA/AAC files on USB memory.
�MP4, WMV and AVI files can use the following resolutions: 128x96, 160x120, 176x144 (QCIF), 320x240 (QVGA), 352x240 (SIF), 352x288 (CIF), 640x480 (VGA), 720x480 (NTSC), 720x576 (PAL)ALAC*28/11.025/12/16/
22.05/24/32/
44.1/48/64/
88.2/96
OGG Vorbis*28/11.025/16/
22.05/32/44.1/
48
Corresponding bit rates*1
File type Bit rate (kbps)
MP3 files:
MPEG 1 LAYER 3 32 - 320
MP3 files:MPEG 2 LSF LAYER 3
8 - 160
WMA files: Ver. 7, 8CBR 48 - 192
WMA files:
Ver. 9*2 (9.1/9.2)CBR 48 - 320
AAC files:
MPEG4/AAC-LC8 - 320
OGG Vorbis 32-500File type Frequency (kHz)File typeQuantization bit
rate (bit)
WAV (LPCM) files
16/24FLAC
ALAC
Compatible channel modes
File type Channel mode
MP3 filesStereo, joint ste-reo, dual chan-nel and monaural
MP3/WMA/AAC file, add an appropriate file extension (.mp3/.wma/.m4a).
�This system plays back files with .mp3/.wma/.m4a file extensions as MP3/WMA/AAC files respec-tively. To prevent noise and playback errors, use the appropriate file extension.
�MP3 files are compatible with the ID3 Tag Ver. 1.0, Ver. 1.1, Ver. 2.2 and Ver. 2.3 formats. This system cannot display disc title, track title and artist name in other formats.
�WMA/AAC files can contain a WMA/AAC tag that is used in the same way as an ID3 tag. WMA/AAC tags carry infor-mation such as track title and artist name.
�The emphasis function is available only when playing MP3 files.
�This system can play back AAC files encoded by iTunes.
�The sound quality of MP3/WMA files generally improves with higher bit rates.
�m3u playlists are not compati-ble with the audio player.
�MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio player.�The player is compatible with VBR (Variable Bit Rate).
�When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if the fast forward or reverse operations are used.
�It is not possible to check fold-ers that do not include MP3/WMA/AAC files.
�MP3/WMA/AAC files in fold-ers up to 8 levels deep can be played. However, the start of playback may be delayed when using USB memory containing numerous levels of folders. For this reason, we recommend creating USB memory with no more than 2 levels of folders.
�The play order of the USB memory with the structure shown above is as follows:
This is a method of embedding track-related information in an
MP3 file. This embedded infor-mation can include the track number, track title, the artist’s name, the album title, the music genre, the year of production, comments, cover art and other data. The contents can be freely edited using software with ID3 tag editing functions. Although the tags are restricted to a num-ber of characters, the informa-tion can be viewed when the track is played back.
â– WMA tag
WMA files can contain a WMA tag that is used in the same way as an ID3 tag. WMA tags carry information such as track title and artist name.
â– MP3
MP3 is an audio compression standard determined by a work-ing group (MPEG) of the ISO (International Standard Organi-zation). MP3 compresses audio data to about 1/10 the size of that on conventional discs.
â– WMA
�WMA (Windows Media Audio) is an audio compression for-
mat developed by Microsoft
®.
It compresses files into a size
smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8 and 9.
�Windows Media is either a registered trademark or trade-AVI ContainerVideo codec:
tion in the United States and/or other countries. This product includes technol-ogy owned by Microsoft Cor-poration and cannot be used or distributed without a license from Microsoft Licens-ing, Inc.
â– AAC
AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG2 and MPEG4.
â– USBâ– iPod
■Bluetooth® audio
If the malfunction is not rectified:
Take your vehicle to your Toyota
dealer.Error messages
Message Explanation
“USB Error�This indicates a
problem in the USB memory or its connection.
“No music files found.�This indicates that no MP3/WMA/AAC files are included in the USB mem-ory.
“No video files found.�This indicates that no video files are included in the USB mem-ory.Message Explanation
“iPod Error�This indicates a problem in the iPod or its con-nection.
“No music files found.�This indicates that there is no music data in the iPod.
“Please check the iPod firm-ware version.�This indicates that the software version is not compatible. Per-form the iPod firmware updates and try again.
“Unable to authorize the iPod.�This indicates that it failed to authorize the iPod.
Please check
your iPod.
Message Explanation
“Music tracks not supported. Please check your portable player.� This indicates a problem in the
operated by saying commands which correspond to a sup-ported function. To display examples of commands for sup-ported functions, select a func-tion button on the screen after starting the voice command sys-tem.
1Press the talk switch.
Voice guidance for the voice com-
mand system can be skipped by pressing the talk switch.
2If “Getting Started with Voice�
screen is displayed, select “OK� or press the talk switch. (P.338)
3After hearing a beep, say a supported command.�To display sample commands of the desired function, say the desired function or select the desired function button. To display more commands, select “More Commands�.
�Selecting “Help� or saying “Help� prompts the voice com-mand system to offer exam-ples of commands and operation methods.
�Registered POIs, registered names in the contacts list etc., can be said in the place of the “<>� next to the commands. (P.339)
For example: Say “Find a restau-
rant�, “Call John Smith� etc.
�If a desired outcome is not
shown, or if no selections are available, perform one of the following to return to the pre-vious screen:
• Say “Go back�.
•S e l e c t .
�To cancel voice recognition,
select , say “Cancel�, or
press and hold the talk switch.
�To perform the voice com-
mand operation again, select “Start Over� or say “Start over�.
�To suspend voice command operation, select “Pause� or say “Pause�. To resume the voice command operation, select “Resume� or press the NOTICE
the confirmation screen does not disappear, press the talk switch
and try again.
â—�If a voice command cannot be rec-ognized 3 consecutive times,
voice recognition will be canceled.
â—�Voice recognition prompts can be
changed on the voice settings screen. (ï‚® P.299)
This function can be used to cancel voice guidance by turning the voice
prompts off. When you press the
talk switch while using this setting, a beep sounds, and then you can
immediately say a command.
â—�Some voice guidance can be can-celed by setting voice prompts to
off. Use this setting when it is desirable to say a command
immediately after pressing the talk
switch and hearing a beep.
To increase voice recognition
performance, use the “Tutori-als� and “Voice Training� func-tions on the “Getting Started with Voice� screen. These func-tions are only available when the vehicle is not moving.
The “Tutorials� and “Voice Train-
ing� functions can also be started on the voice settings screen. ( P.299)
1Press the talk switch.2Select the desired item to be set.
�For devices that are not installed to the vehicle, com-mands relating to that device may not be displayed on the screen. Also, depending on other conditions, such as compatibility, some com-mands may not be displayed on the screen.
�The functions available may vary according to the system installed.
�Voice recognition language can be changed. ( P.296)
â– Commonâ– Top menu
*: Vehicle must be parked
â– Phone*1Command list
Command list overview
Command list
Command Action
“Help�Displays exam-
ples of some of the available commands
“Go back�Returns to the previous screen
“Cancel�Cancels the voice command system“Start over�Returns to top menu screen
“Pause�Temporarily pauses a voice session until it is resumed by pressing the talk switch again.
Command Action
“Show com-mand examples for <menu>�Displays the command list of the selected menu
“More com-mands�Displays more commonly used commands
“Voice settings�Displays Voice Setting screen
“Train my voice�Displays Train Voice Recogni-
tion screen
*
Command Action
“Call <con-
tact>�*2Places a call to
the specified contact from the phone book
“Call <contact>
<phone type>�*2Places a call to
the specified phone type of the contact from the phone bookCommand Action
COROLLA_U5Entune audio*: A station list must be built first
using the radio screen ( ï‚®P.307)
â– Audio*1
*1:The audio device must be con-
nected via a USB cable to use
the functionality in this section
*2:When an Apple CarPlay connec-
tion is established, this voice commands will be unavailable.
â– Apps*1
*1:When an Apple CarPlay connec-
tion is established, this voice commands will be unavailable.
*2:When an application is opened
and is in full screen mode, press-ing the talk switch will start the voice command system and commands for the currently dis-played application will be avail-able
â—�Commands relating to operation
of the audio/visual system can “Play a <genre>
station�Changes the radio to an FM station of the
specified genre
*
“Tune to preset
<1-36>�Changes the radio to the specified preset radio station
Command Action
“Play Playlist
<name>�*2Plays tracks
from the selected playlist
“Play Artist
<name>�*2Plays tracks
from the selected artist
“Play Song
<name>�*2Plays the
selected track
“Play Album
<name>�*2Plays tracks
from the selected album
“Play Genre
<name>�*2Plays tracks
from the selected genre
“Play Composer
<name>�*2Plays tracks
from the selected com-poser
“Play Podcast
<name>�*2Plays tracks
from the selected podcastCommand Action
“Play Audiobook
<name>�*2Plays tracks
from the selected audio-book
“Audio On�Turns the audio/visual sys-tem on
“Audio Off�Turns the audio/visual sys-tem off
“Change the audio source to <source name>� Sets the source to the specified audio mode
Command Action
“Launch <appli-
cation name>�*2Activates the
Toyota Entune App Suite Con-nect applicationCommand Action
â—�Wait for the listening beeps before using the Mobile Assistant.
â—�The Mobile Assistant may not rec-ognize commands in the following situations:
• Spoken too quickly.• Spoken at a low or high volume.• The windows are open.• Passengers are talking while the
Mobile Assistant is being used.
• The fan speed of the air condition-
ing system is set at high.
• The air conditioning vents are
turned toward the microphone.
Mobile Assist supports the Siri
Eyes Free Mode and Google App. The available features and functions may vary based on the iOS/Android version installed on the connected device.
�Type A
1Press and hold the talk
switch on the steering wheel
until Mobile Assistant screen is displayed.
�Type B
1Press and hold the switch
on the steering wheel until Mobile Assistant
The Mobile Assistant func-
tion is a voice input assist function. Mobile Assist sup-ports the Siri Eyes Free Mode and Google App. (Google App can be used only with the corresponding device.) Instructions can be spoken into the vehicle microphone as if speaking a command to the phone. The content of the request is then interpreted by the phone and the result is out-put from the vehicle speak-ers. To operate the Mobile Assistant, a compatible device must be registered and connected to this sys-
tem via Bluetooth
®.
(ï‚®P.276)
When an Apple CarPlay
connection is established, this function will be unavail-able.Connectable devices and
2The Mobile Assistant can be used only when the following screen is displayed.
�Type A: To cancel the Mobile Assistant, select “Cancel� or press and hold the talk switch on the steering wheel.Type B: To cancel the Mobile Assistant, select “Cancel� or
press and hold the switch
on the steering wheel.
�Type A: To restart the Mobile
Assistant for additional com-mands, press the talk switch on the steering wheel.Type B: To restart the Mobile Assistant for additional com-
mands, press the switch
on the steering wheel.
• Mobile Assistant can only be restarted after the system
responds to a voice command.
• After some phone and music
commands, the Mobile Assistant feature will automatically end to complete the requested action.
�The volume of the Mobile
Assistant can be adjusted using the “POWER VOLUME� knob or steering wheel vol-ume control switches. The Mobile Assistant and phone call volumes are synchro-nized.
Select to send tones. This button only appears when a number that contains a (w) is dialed in hands-free mode. (ï‚®P.354)
Select to adjust your voice volume that the other party hears from their speaker. (ï‚®P.355)
Select to mute your voice to the other party.
Select to change handset
modes between hands-free and cellular phone.
Select to put a call on hold.
To cancel this function, select “Activate�.
Select to hang up the phone.
â—�Changing from hands-free call to
cellular phone call is not possible while driving.
â—�Only when the vehicle is not mov-ing, the contact image can be dis-
played.
â—�When cellular phone call is changed to hands-free call, the
hands-free screen will be dis-played and its functions can be
operated on the screen.
â—�Changing between cellular phone call and hands-free call can be
performed by operating the cellu-lar phone directly.
â—�Transferring methods and opera-tions will be differ ent depending
on the type of cellular phone you
have.
â—�For the operation of the cellular phone, see the manual that
comes with it.
â– By keypad
This operation cannot be per-
formed while driving.
1Select “0-9�.
2Enter the desired number.
■By selecting “Release
Tones�
“Release Tones� appear when a continuous tone signal (s) con-taining a (w) is registered in the contact list.This operation can be per-formed while driving.
Select “Release Tones�.Talking on the Blue-
tooth® hands-free sys-
tem
While talking on the phone,
the following screen is dis-played. The operations out-lined below can be performed on this screen.
COROLLA_U5Entune audioâ—�A continuous tone signal is a char-
acter string that consists of num-
bers and the characters “p� or “w�. (e.g. 056133w0123p#1)
�When the “p� pause tone is used, the tone data up until the next
pause tone will be automatically
sent after 2 seconds have elapsed. When the “w� pause tone
is used, the tone data up until the
next pause tone will be automati-
cally sent after a user operation is performed.
â—�Release tones can be used when automated operation of a phone
based service su ch as an answer-
ing machine or bank phone ser-
vice is desired. A phone number
with continuous tone signals can be registered in the contact list.
�Tone data after a “w� pause tone can be operated by voice com-
mand during a call.
1Select “Transmit Volume�.
2Select the desired level for
the transmit volume.
3Select to display previ-
ous screen.
â—�The sound quality of the voice
heard from the other party’s
speaker may be negatively impacted.
�“Transmit Volume� is dimmed when mute is on.
�When there are no calls on
hold during a call: “Hold� is displayed. When selected, the current call is placed on hold.
�When there is no current call, but there is a call on hold: “Activate� is displayed. When selected, the system switches to the call that was on hold.
�When there is another call on hold during a call: “Swap Calls� is displayed. When selected, the current call is placed on hold, and the sys-tem switches to the call that was on hold.
This function may not be available
depending on the type of cellular
phone.
When a call is interrupted by a
third party while talking, the incoming screen is displayed.
Select “Answer� or press the
switch on the steering wheel to
start talking with the other party.
�To refuse to receive the call:
Select “Decline�.
�Each time “Swap Calls� is selected, the party who is on hold will be switched.
�Account names are the names of the accounts that exist on the currently con-nected phone.
�The following functions can be used on message function:
• Receiving a message
(ï‚®P.356)
• Checking messages
(ï‚®P.357)
• Replying to a message (dicta-
tion reply) (ï‚® P.358)
• Replying to a message (quick
reply) (ï‚® P.358)
• Calling the message sender
(ï‚®P.359)
• Message settings ( P.368)
When an e-mail/SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen.
Select to check the message.
Select to not open the mes-
sage.
Select to call the message
sender.
�Depending on the type of Blue-Bluetooth® phone
message function
Received messages can be forwarded from the con-
nected Bluetooth
® phone,
enabling checking and
replying using the system.
Depending on the type of
Bluetooth® phone con-
nected, received messages
may not be transferred to the system.
If the phone does not sup-port the message function, this function cannot be used. Even when the sup-ported phone is used, reply function may not be used.
COROLLA_U5Entune audiotooth® phone used for receiving
messages, or its registration sta-
tus with the system, some infor-
mation may not be displayed.
â—�The pop-up screen is separately available for incoming e-mail and
SMS/MMS messages under the following conditions:
E-mail:
• “Incoming E-mail Display� is set to
“Full Screen�. ( P.361)
• “E-mail Notification Pop-up� is set
to on. (ï‚®P.361)
SMS/MMS:• “Incoming SMS/MMS Display� is
set to “Full Screen�. ( P.361)
• “SMS/MMS Notification Pop-up� is
set to on. ( ï‚®P.361)
â—�Depending on the type of Blue-
tooth® phone being connected,
E-Mail function cannot be used via Bluetooth
®.
1Display the message screen.
(ï‚®P.356)
2Select a desired account name.
3Select the desired message from the list.
4Check that the message is displayed.
Select to call the message sender.
Select to have messages
read out.To cancel this function, select “Stop�.When “Automatic Message Readout� is set to on, mes-sages will be automatically read out. ( P.368)
Select to display the previous or next message.
This function can be chosen
the method to reply mes-sage with “Dictation� or “Quick Message�.
â—�Reading a text message is not
available while driving.
â—�Depending on the type of Blue-
tooth® phone being connected,
this function cannot be used.
â—�Depending on the type of Blue-tooth
® phone being connected, it
may be necessary to perform
additional steps on the phone.
â—�Messages are displayed in the appropriate connected Blue-
tooth® phone’s registered mail
address folder. Select the desired
folder to be displayed.
â—�Only received messages on the
connected Bluetooth® phone can
be displayed.
â—�The text of the message is not dis-
played while driving.
�Turn the “POWER VOLUME� knob, or use the volume control
switch on the steering wheel to
adjust the message read out vol-
ume.
�“Subject:� field is not shown on SMS case.
�E-mail only: Select “Mark Unread� Checking received mes-
2Select “Notifications�.3Select the desired item to be set.
Select to change the incom-
ing call display.
“Full Screen�: W hen a call is
received, the incoming call screen
is displayed and can be operated on the screen.“Drop-down�: A message is dis-played at the top of the screen.
Select to set the SMS/MMS
notification pop-up on/off.
Select to change the incom-
ing SMS/MMS display.“Full Screen�: When an SMS/MMS message is
received, the incoming
SMS/MMS display screen is displayed and can be oper-ated on the screen.“Drop-down�: When an SMS/MMS message is received, a message is dis-played at the top of the Notifications settings
ing e-mail display.“Full Screen�: When an e-mail is received, the incom-ing e-mail display screen is displayed and can be oper-ated on the screen.“Drop-down�: When an e-mail is received, a mes-sage is displayed at the top of the screen.
Select to set display of the
contact/history transfer com-pletion message on/off.
Select to reset all setup
items.
Depending on the type of Blue-
tooth® phone, these functions may
not be available.
Contacts can be transferred
from a Bluetooth® phone to this
system. Contacts and favorites
can be added, edited and deleted. Also, the call history can be deleted.
1Display the phone settings
screen. (ï‚® P.360)
2Select “Contacts/Call His-tory�.3Select the desired item to be set.
For PBAP compatible Blue-
tooth
® phones: Select to
change the contact/history
transfer settings. ( ï‚®P.363)
Select to update contacts from the connected device. (ï‚®P.363)
Select to sort contacts by the first name or last name field.
Select to add contacts to the
favorites list. ( ï‚®P.366)
Select to delete contacts from the favorites list. (ï‚®P.366)
Select to clear the call his-
tory.
*
Select to add new contacts to the contact list.
* (ï‚®P.365)
Select to edit contacts in the Contacts/Call history set-
2Select the desired contact and select “Delete�.
3Select “Yes� when the confir-mation screen appears.
â—�Multiple data can be selected and
deleted at the same time.
�When a Bluetooth® phone is
deleted, the contact data will be
deleted at the same time.
Up to 15 contacts (maximum of
4 numbers per contact) can be registered in the favorites list.
â– Registering the contacts in the favorites list
1Select “Add Favorite�.
2Select the desired contact to add to the favorites list.Dimmed contacts are already
stored as a favorite.
3Check that a confirmation
screen is displayed when the operation is complete.
�When 15 contacts have already been registered to the favorites list
1When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced.Select “Yes� when the confir-mation screen appears to replace a contact.
2Select the contact to be replaced.
3Check that a confirmation screen is displayed when the operation is complete.
â– Registering contacts in the favorites list in a different way (from the contact details screen)
1Display the phone top screen. (ï‚® P.345)
2Select “Contacts� and select the desired contact.
3Select “Add Favorite�.
4Check that a confirmation screen is displayed when the operation is complete.
â– Deleting the contacts in the favorites list
1Select “Remove Favorite�.
2Select the desired contacts and select “Remove�.Deleting the contact data
Phonebook data cannot be transferred manually/automati-cally.Likely cause Solution
An incorrect
passcode was entered on the cellular phone.Enter the correct passcode on the cellular phone.
The registration operation has not been com-pleted on the cel-lular phone side.Complete the registration oper-ation on the cel-lular phone (approve regis-tration on the phone).
Old registration information remains on either this sys-tem or the cellu-lar phone.Delete the exist-ing registration information from both this system and the cellular phone, then reg-ister the cellular phone you wish to connect to this system. (ï‚®P.282)
Likely cause Solution
Another Blue-
tooth® device is
already con-
nected.Manually con-nect the cellular phone you wish to use to this system. (ï‚®P.280)
Bluetooth® func-
tion is not enabled on the cellular phone.Enable the Blue-
tooth® function
on the cellular
phone.Automatic Blue-
tooth® connec-
tion on this
system is set to
off.Set automatic
Bluetooth® con-
nection on this
system to on when the engine switch is in ACC or ON. (ï‚® P.284)
Preferred device settings function on this system is set to on.Set preferred device settings function on this system to off. (ï‚®P.285)
Set the desired cellular phone to the highest auto-matic connec-tion priority. (ï‚®P.285)
The Bluetooth® connection sta-Likely cause Solution
The profile ver-
sion of the con-nected cellular phone may not be compatible with transferring phonebook data.For a list of spe-cific devices which operation has been con-firmed on this system, check with your Toyota dealer or the fol-lowing website: http://www.
toyota.com/
Entune/ in the
United States, http://www.
toyota.ca/
entune in
Canada, and http://www.
toyotapr.com/
entune in Puerto
Rico
Automatic con-tact transfer function on this system is set to off.Set automatic contact transfer function on this system to on. (ï‚®P.363)
Passcode has not been entered on the cellular phone.Enter the pass-code on the cel-lular phone if requested (default pass-code: 1234).
Transfer opera-tion on the cellu-lar phone has not completed.Complete trans-fer operation on the cellular phone (approve transfer opera-tion on the phone).Likely cause Solution
Automatic con-tact transfer function on this system is set to on.Set automatic contact transfer function on this system to off. (ï‚®P.363)
Likely cause Solution
Message trans-fer is not enabled on the cellular phone.Enable mes-sage transfer on the cellular phone (approve message trans-fer on the phone).
Automatic trans-fer function on this system is set to off.Set automatic transfer function on this system to on. (ï‚®P.363)
Likely cause Solution
Notification of SMS/MMS/E-mail reception on this system is set to off.Set notification of SMS/MMS/E-mail reception on this system to on. (ï‚®P.361)
Automatic mes-sage transfer function is not enabled on the cellular phone. Enable auto-matic transfer function on the cellular phone.
screen each time the engine switch is in ACC or ON.
Even though all conceivable
measures have been taken, the symptom status does not change.
For details, refer to the owner’s
manual that came with the cellular
phone.Likely cause Solution
Connection con-
firmation display on this system is set to on.To turn off the display, set con-nection confir-mation display on this system to off. (ï‚®P.285)
Likely cause Solution
The cellular phone is not close enough to this system. Bring the cellu-lar phone closer to this system.
Radio interfer-ence has occurred.Turn off Wi-Fi®
devices or other devices that may emit radio waves.The cellular phone is the most likely cause of the symptom.Turn the cellular phone off, remove and rein-stall the battery pack, and then restart the cellu-lar phone.
Enable the cellu-lar phone’s Blue-
tooth
®
connection.
Stop the cellular
phone’s security software and close all applica-tions.
Before using an application installed on the cellular phone, carefully check its source and how its opera-tion might affect this system.Likely cause Solution
Provides applications to the system or a smart phone.
Smart phone*
Using the Toyota Entune App Su ite Connect, communication is
relayed between the system, application server and contents pro-
vider. The smart phone cannot be operated while communicating.
Applications
Display usable content from the content providers on the screen
using the data connection of t he connected smart phone or DCM.
SystemContent received, via a smart phone or DCM, from content pro-vider servers is displayed on the screen. The system is equippe d
with an application player to run applications.
Via DCM
*: For known compatible phones, refer to
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, andhttp://www.toyo tapr.com/entune
in Puerto Rico.
The required operations to acti-
vate applications and connect a smart phone to the system, and the registration steps for the Toyota Entune App Suite Con-nect are explained in this sec-tion.
�Toyota Entune App Suite
Connect does not require an activation fee or monthly recurring fees.
�Services requiring a separate contract can also be used.
*
*: For details, refer to
http://www.toyota.com/Entune/
or call 1-800-331-4331 in the
United States,http://www.toyota.ca/entune
or call 1-888-869-6828 in Can-ada, andhttp://www.toyotapr.com/entune
or call 1-877-855-8377 in Puerto Rico.
â– Availability of function
�Toyota Entune App Suite
Connect is available in the contiguous United States, Before using the function
Telematics Subscription Service Agreement and are enrolled, you can begin receiving ser-vices. A variety of subscription terms are available. Contact your Toyota dealer, or call 1-800-331-4331 in the United States, 1-888-869-6828 in Can-ada, and 1-877-855-8377 in Puerto Rico, for further sub-scription details. ( ï‚®P.375)
â– Availability of functions
�Wi-Fi® Hotspot is available in
the contiguous United States, Washington D.C., Alaska and Hawaii.�Wi-Fi
® Hotspot is not avail-
able in Puerto Rico, Canada, and in the United States Vir-gin Islands.Type B: Function
achieved by using DCM and the system
*
The functionality of Wi-Fi®
Hotspot is made possible
through the shared work of the DCM and the system.
This service is available by subscription and supported by the Toyota Entune center, which operates 24 hours a day, 7 days a week.
“App Catalog�: Select to change the order of the applications. ( P.380)
: Displays the number of new
notifications for the application
When the App Suite is activated,
an application may need to be updated. To update an applica-tion, it is necessary to download update data and install it.
â– Downloading update
If an update is available, “Update� can be selected.Toyota Entune App
Suite Connect
App Suite is a function that
enables certain apps installed on a smart phone or the system to be dis-played on and operated from the system screen. Before the Toyota Entune App Suite Connect can be used, some setup needs to be performed. ( ï‚®P.376)
For details about the func-tions and services provided by each application, refer tohttp://www.toyota.com/
played screen. To install the update data: (ï‚®P.380)
“See Detail�: Select to display detailed information on the update
data.
“Install�: Select to install the update
data. Follow the steps “Installing
the update data� from step 2.
(ï‚®P.380)
â– Installing the update data
After the downloading is com-
plete, “Update� will be changed to “Install�.
1Select “Install� on the appli-
cation screen. ( ï‚®P.379)
2Select “Continue�.
“Later�: Select to postpone the
installation of the update data and go back to the previous screen.
3Check that installing is
started.
“Install in Background�: Select to
operate other functions while
installing.
4Select “OK� after the install-
ing is complete.
The Toyota Entune App Suite Con-
nect function cannot be operated while installing.
Order of the applications can be
changed.
1Display the application
screen. (ï‚® P.379)
2Select “App Catalog�.
3Select the desired application to be moved.
4Select “<<� or “>>� to move the application, and then select the done button.
When problems occur with start-ing the application player, a message will appear on the screen. Referring to the follow-ing items, identify the problem and take the suggested correc-tive action.
�“When it is safe and legal to
do so, please ensure your Entune App Suite application is running and logged in on your phone.�
The Toyota Entune App Suite Con-
nect application cannot be con-
nected to Bluetooth® SPP.
Refer to
http://www.toyota.com/Entune/
in the United States,http://www.toyota.ca/entune
in Canada, andhttp://www.toyotapr.com/entuneReordering the applica-
COROLLA_U5Entune audioin Puerto Rico, to confirm if the
phone is Bluetooth® SPP compati-
ble or not, and then activate the
Toyota Entune App Suite Connect application.
�“Installation failed, please try
again�
Installation can be attempted again
by changing to the application screen and pressing the “Install� switch.
�“Application download error.
Please try again later.�
Downloading can be attempted
again by checking the communica-tion status, chang ing to the applica-
tion screen and pressing the “Download� switch again.
�“Download error, some
Entune App Suite functions may not work as expected. Please reinitiate the download process.�
The Toyota Entune App Suite Con-
nect application cannot be con-
nected to Bluetooth® SPP.
Refer to
http://www.toyota.com/Entune/
in the United States,http://www.toyota.ca/entune
in Canada, andhttp://www.toyotapr.com/entune
in Puerto Rico, to confirm if the
phone is Bluetooth® SPP compati-
ble or not, and then activate the
Toyota Entune App Suite Connect application.
Please ensure your Toyota Entune
App Suite Connect application is running and logged in on your phone while vehicle is not moving.�“To use the services, Entune
APP Suite Connect applica-tion needs to be running on your phone. For more infor-mation, please visit toy-ota.com or call 1-800-331-4331 in the United States, 1-888-869-6828 in Canada, and 1-877-855-8377 in Puerto Rico.�
The Toyota Entune App Suite Con-
nect application cannot be con-
nected to Bluetooth® SPP.
Refer to
http://www.toyota.com/Entune/
in the United States,http://www.toyota.ca/entune
in Canada, andhttp://www.toyotapr.com/entune
in Puerto Rico, to confirm if the
phone is Bluetooth® SPP compati-
ble or not, and then activate the
Toyota Entune App Suite Connect application.
�“Communication unsuccess-
ful. Please try again.�
Communication was disconnected.
After a few moments, retry the
operation.
A keyword can be entered to an
application by the software key-board or voice recognition func-tion. For details about the functions and services provided by each application, refer tohttp://www.toyota.com/Entune/Entering keyword opera-
COROLLA_U5Entune audio5-18.Toyota Entune App Suite Connect settings
1Press the “MENU� button.
2Select “Setup�.
3Select “Entune App Suite�.
4Select the desired items to
be set.
Select to set the pop up
reminder for smart phone data usage. (ï‚® P.381)Select to detect iPhone app automatically on/off.
Select to set the enhanced
mode with connecting USB device on/off.
When an iPhone is connected while
this setting is set to “On�, communi-cation with devices connected to other USB ports may not be possi-ble. Also, depending on the device, charging may not be possible.
Select to configure the Apps
menu layout (e.g. app order, which applications are acti-vated, etc.). This updates a setting file stored on the Toy-ota Entune center, this set-tings file can also be updated from the navigation system, smart phone app and by web portal.
Select to install the Apps via
a USB memory device. For details, contact your Toyota dealer.
Select to reset all setup
items.
The data use notification pop-up, which indicates that the system will use an internet con-nection, can be enabled/dis-abled.
1Display the Toyota Entune
App Suite Connect settings screen. (ï‚® P.383)Setup
The settings of Toyota Entune App Suite Connect can be changed.
COROLLA_U6-1.Using the air conditioning system and defogger
*: If equipped
The display and button positions w ill differ depending on the t ype of
the system.
Fan speed control switch
Temperature control switch“MAX A/C� switch“A/C� switchOutside air mode switchRecirculated air mode switch
Airflow mode control switch
Rear window defogger and outside rear view mirror defoggers
switch
*
Windshield defogger switch
On/off switch
Rear window defogger switch*
*: If equipped
â– Adjusting the temperature
setting
To adjust the temperature set-ting, turn the temperature con-trol switch clockwise (warm) or counterclockwise (cool).If “A/C� switch is not pressed, the
system will blow ambient tempera-ture air or heated air.
For quick cooling, press the “MAX
A/C� switch. The air conditioning will automatically turn on and, if an Manual air condi tioning system*
Fan speed control switch“A/C� switchOutside air mode switchRecirculated air mode switchEco air conditioning mode switchAirflow mode control switchRear window defogger and outside rear view mirror defoggers
switch
Windshield defogger switch
Off switch
Automatic mode switch
â– Adjusting the temperature
setting
To adjust the temperature set-ting, turn the temperature con-trol switch clockwise (warm) or counterclockwise (cool).
If “A/C� switch is not pressed, the
system will blow ambient tempera-ture air or heated air.Automatic air conditioning system*
Air outlets are automatically selected and fan speed is auto-
matically adjusted according to the set temperature setting.Also, the display and button positions will differ depending on
to supply 2.1 A of electricity at 5 V to external devices.The USB charging port are for charging only. They are not designed for data transfer or other purposes.Depending on the external device, it may not charge prop-erly. Refer to the manual included with the device before using a USB charging port.
â– Using the USB charging port
Lift the lid while pulling up the knob.
â– The USB charging port can be
used when
The engine switch is in ACC or ON.
â– Situations in which the USB
charging port may not operate
correctly
â—�If a device which consumes more than 2.1 A at 5 V is connected
â—�If a device designed to communi-cate with a personal computer, such as a USB memory device, is connected
â—�If the connected external device is turned off (depend ing on device)
â—�If the temperature inside the vehi-
cle is high, such as after the vehi-
cle has been parked in the sun
â– About connected external
device
Depending on the connected exter-nal device, charging may occasion-ally be suspended and then start
again. This is not a malfunction.Other interior features
USB charging port (if
equipped)
NOTICE
â– To prevent damage to the
USB charging port
â—�Do not insert foreign objects into the port.
â—�Do not spill wate r or other liq-
uids into the port.
â—�Do not apply exc essive force to
or impact the USB charging port.
â—�Do not disassemble or modify the USB charging port.
â– To prevent damage to exter-
nal devices
â—�Do not leave external devices in the vehicle. The temperature
inside the vehicle may become high, resulting in damage to an
external device.
â—�Do not push down on or apply
unnecessary force to an exter-nal device or the cable of an
external device while it is con-
nected.
â– To prevent battery discharge
Do not use the USB charging port
for a long period of time with the engine stopped.
COROLLA_U6Interior featuresThe power outlet can be used
for 12 V accessories that run on less than 10 A.
Lift the lid while pulling up the
knob and open the power outlet lid.
â– The power outlet can be used
when
The engine switch is in ACC or ON.
â– When turning the engine switch off
Disconnect electrical devices with charging functions, such as mobile
battery packs.
If such devices are left connected, the engine switch may not be turned
off normally.A portable device, such as a
smartphone or mobile battery, can be charged by just placing it on the charging area, provided the device is compatible with the Qi wireless charging standard created by the Wireless Power Consortium.
The wireless charger cannot be
used with a portable device that is larger than the charging area. Additionally, depending on the portable device, the wireless charger may not operate prop-erly. Refer to the operation man-ual of the portable device.
■The “Qi� symbol
The “Qi� symbol is a trademark of the Wireless Power Consor-tium. Power outlet
NOTICE
â– To prevent the fuse from
being blown
Do not use an accessory that uses more than 12 V 10 A.
â– To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that
enter the power outlet may cause a short circuit.â– To prevent the battery from
COROLLA_U6Interior featuresâ– Operation indicator light status
*: Depending on the portable devic e, the operation indicator ligh t may stay
illuminated (orange) after charging has completed.
�If the operation indicator light blinks
If an error is detec ted, the operation in dicator light will bli nk (orange). Take
the appropriate measures according to the table below.
â– The wireless charger can be
operated when
The engine switch is in ACC or ON.
â– Portable devices that can be
charged
â—�Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger. However, compatibility
with all devices which meet the Qi
wireless charging standard is not guaranteed.
â—�The wireless char ger is designed
to supply low power electricity (5
W or less) to a cellular phone, smartphone, or other portable device.Operation indicator light State
Off The Wireless charger is off
Green (illuminated)Standby (charging is possible)
Charging is complete*
Orange (illuminated)A portable device has been placed on the
charging area (identifying the portable device)
Charging in progress
Operation indicator light Suspected cause Measure
Blinks (orange) at a one second interval continu-ouslyVehicle to charger com-munication failure. Contact your Toyota dealer.
Blinks (orange) 3 times repeatedlyA foreign object exists between the portable device and charging area.
Remove the foreign object.
Portable device is not positioned properly on the charging area. Move the portable device toward the cen-ter of the charging area.
Blinks (orange) 4 times repeatedlyThe temperature of the wireless charger is excessively high. Stop charging immedi-ately and continue charging after a while.
buttons which can be pro-grammed to operate 3 different devices. Refer to the program-ming methods on the following pages to determine the method which is appropriate for the device.HomeLink
® indicator light
Garage door operation indi-cators
HomeLink
® icon
Illuminates while HomeLink® is
operating.
Buttons
â– Codes stored in the Home-
Link® memory
â—�The registered codes are not
erased even if the battery cable is
disconnected.
â—�If learning failed when registering
a different code to a HomeLink®
button that already has a code
registered to it, the already regis-
tered code will not be erased.
â– Certification for the garage door opener
�Except for vehicles sold in CanadaGarage door opener*
The garage door opener can
be programmed using the
HomeLink® to operate
garage doors, gates, entry
doors, door locks, home lighting systems, security systems, and other devices.
COROLLA_U6Interior features�For vehicles sold in Canada
â– When support is necessary
Visit on the web at www.
homelink.com/toyota or call
1-800-355-3515.
â– Before programming Home-
Link®
�During programming, it is pos-
sible that garage doors, gates, or other devices may operate. For this reason, make sure that people and objects are clear of the garage door or other devices to prevent injury or other potential harm.
�It is recommended that a new battery be placed in the remote control transmitter for more accurate programming.
WARNING
â– When programming a garage
door or other remote control
device
The garage door o r other device
may operate, so ensure people
and objects are out of danger to prevent potential harm.
â– Conforming to federal safety
standards
Do not use the HomeLink® com-
patible transceiver with any
garage door opener or device that
lacks safety stop and reverse fea-
tures as required by federal safety standards.
This includes any garage door
that cannot detect an interfering
object. A door or device without
these features increases the risk of death or serious injury.â– When operating or program-
ming HomeLink®
Never allow a child to operate or play with the HomeLink
manufactured after 1995 may be equipped with rolling code protection. If this is the case, you may need a stepladder or other sturdy, safe device to reach the “Learn� or “Smart� button on the garage door opener motor.
■Programming HomeLink®
Steps 1 through 3 must be per-
formed within 60 seconds, oth-erwise the indicator light will stop flashing and programming will not be able to be completed.
1Press and release the Home-
Link
® button you want to pro-
gram and check that the
HomeLink® indicator light
flashes (orange).
2Point the remote control
transmitter for the device at the rear view mirror, 1 to 3 in. (25 to 75 mm) from the
HomeLink
® buttons.
Keep the HomeLink® indicator light
in view while programming.
3Program a device.�Programming a device other
than an entry gate (for U.S.A. owners)
Press and hold the handheld transmitter button until the
HomeLink
® indicator light
changes from slowly flashing
orange to rapidly flashing green (rolling code) or continuously lit green (fixed code), then release the button.
�Programming an entry gate (for U.S.A. owners)/Program-ming a device in the Cana-dian market
Press and release the remote control transmitter button at 2 second intervals, repeatedly,
until the HomeLink
® indicator
light changes from slowly flash-
ing (orange) to rapidly flashing (green) (rolling code) or continu-ously lit (green) (fixed code).
4Test the HomeLink
® opera-
tion by pressing the newly
programmed button and observing the indicator light:
�Indicator light illuminates: Programming of a fixed code device has completed. The
cation with a garage door (only available for compati-ble devices)
When enabled, 2-way communi-cation allows you to check the status of the opening and clos-ing of a garage door through indicators in your vehicle.
2-way communication is only
available if the garage door opener motor used is a compati-ble device. (To check device compatibility, refer to www.homelink.com.)
1Within 5 seconds after pro-
gramming the garage door opener has been completed, if the garage door opener motor is trained to Home-
Link
®, both garage door
operation indicators will flash
rapidly (green) and the light on the garage door opener motor will blink twice, indicat-ing that 2-way communica-tion is enabled.
If the indicators do not flash, per-form 2 and 3 within the first 10
presses of the HomeLink® button
after programming has been com-
pleted.
2Press a programmed Home-
Link® button to operate a
garage door.
3Within 1 minute of pressing the HomeLink
® button, after
the garage door operation
has stopped, press the “Learn� or “Smart� button on the garage door opener motor. Within 5 seconds of the establishment of 2-way communication with the garage door opener, both garage door operation indica-tors in the vehicle will flash rapidly (green) and the light on the garage door opener motor will blink twice, indicat-ing that 2-way communica-tion is enabled.
â– Reprogramming a single
HomeLink® button
When the following procedure is
performed, buttons which already have devices registered to them can be overwritten:
COROLLA_U6Interior features(it takes 20 seconds for the
HomeLink® indicator to start
flashing).
â– Before programming
â—�Install a new battery in the trans-
mitter.
â—�The battery side of the transmitter must be pointed away from the
HomeLink®.
Press the appropriate Home-
Link® button. The HomeLink®
indicator light should turn on.
The status of the opening and
closing of a garage door is shown by the indicators.
Opening
Closing
This function is onl y available if the
garage door opener motor used is a
compatible device. (To check device compatib ility, refer to
www.homelink.com.)The indicators can operate
within approximately 820 ft. (250 m) of the garage door. However, if there are obstructions between the garage door and the vehicle, such as houses and trees, feedback signals from the garage door may not be received.
To recall the previous door oper-
ation status, press and release
either HomeLink
® buttons
and or and
simultaneously. The last
recorded status will be dis-played for 3 seconds.
Press and hold the 2 outside
buttons for 10 seconds until the
HomeLink
® indicator light
changes from continuously lit
(orange) to rapidly flashing (green).
If you sell your vehicle, be sure to
erase the programs stored in the Operating HomeLink®Color Status
vacuum cleaner. Wipe dirty surfaces with a cloth damp-ened with lukewarm water.
�If dirt cannot be removed, wipe it off with a soft cloth dampened with neutral deter-gent diluted to approximately 1%.Wring out any excess water from the cloth and thoroughly wipe off remaining traces of detergent and water.
â– Shampooing the carpets
There are several commercial foam-
ing-type cleaners available. Use a
sponge or brush to apply the foam. Rub in overlapping circles. Do not
use water. Wipe dirty surfaces and
let them dry. Excellent results are obtained by keeping the carpet as
dry as possible.
â– Handling the seat belts
Clean with mild soap and lukewarm water using a cloth or sponge. Also
check the belts periodically for excessive wear, fraying or cuts.NOTICE
• Steering parts
• Suspension parts• Brake parts
â—�Keep the cleaning nozzle at
least 11.9 in. (30 cm) away from the vehicles bod y. Otherwise
resin section, such as moldings and bumpers, may be deformed and damaged. Also, do not con-tinuously hold the nozzle in the
same place.
â—�Do not spray the lower part of
the windshield continuously. If water enters the air conditioning
system intake located near the
lower part of the windshield, the air conditioning system may not
operate correctly.Cleaning and protect-
ing the vehicle interior
Perform cleaning in a man-
ner appropriate to each component and its material.
â—�Toyota technicians are well-trained specialists and are kept up to date with the latest ser-
vice information. They are well
informed about the operation of all systems on your vehicle.
â—�Keep a copy of the repair order. It proves that the maintenance that has been performed is under war-
ranty coverage. If any problem
should arise while your vehicle is under warranty, your Toyota
dealer will promptly take care of it.General maintenance should be
performed on a daily basis. This can be done by yourself or by a Toyota dealer.
Scheduled maintenance should
be performed at specified inter-vals according to the mainte-nance schedule.
For details about maintenance
items and schedules, refer to the “Scheduled Maintenance Guide� or “Owner’s Manual Supplement�.Maintenance require-
ments
To ensure safe and econom-
ical driving, day-to-day care and regular maintenance are essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the maintenance below.
WARNING
â– If your vehicle is not properly
maintained
Improper maintenance could result in serious damage to the
vehicle and possible death or seri-
ous injury.â– Handling of the battery
â—�Engine exhaust, some of its constituents, and a wide variety
of automobile components con-
tain or emit chemicals known to the State of California to cause
cancer and birth defects and
other reproductive harm. Work in a well ventilated area.
â—�Oils, fuels and fluids contained
in vehicles as well as waste pro-
duced by component wear con-tain or emit chemicals known to
the State of California to cause
cancer and birth defects or other reproductive harm. Avoid
exposure and wash any
affected area immediately.
â—�Battery posts, terminals and related accessories contain lead
and lead compounds which are
known to cause brain damage. Wash your hands after han-
After the required maintenance is performed according to the mainte-
nance schedule, please reset the message.
To reset the messa ge, follow the
procedure described below:
1Press or of the meter
control switch to select .
2Press or to select “Vehi-
cle Settings� and then press and
hold .
3Press or to select
“Scheduled Maintenance� and
then press .
4Press or to select “Yes�
and then press .
A message will be displayed on the
multi-information display when the
reset procedure has been com-
pleted.
You can perform some mainte-
nance procedures by yourself.Please be aware that do-it-your-self maintenance may affect warranty coverage.
The use of Toyota repair manuals is
recommended.
For details about warranty cover-
age, refer to the separate “Owner’s Warranty Information Booklet� or “Owner’s Manual Supplement�.Do-it-yourself mainte-nance
General maintenance
Listed below are the general
maintenance items that should be performed at the intervals specified in the “Owner’s Warranty Informa-tion Booklet� or “Owner’s Manual Supplement/Sched-uled Maintenance Guide�. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice.
WARNING
â– If the engine is running
Turn the engine off and ensure
that there is adequate ventilation
before performing maintenance
checks.
Engine compartment
Items Check points
BatteryCheck the connec-
tions. (ï‚®P.442)
Brake fluidIs the brake fluid at the correct level? (ï‚®P.441)
Engine coolantIs the engine cool-ant at the correct level? (ï‚® P.440)
Engine oilIs the engine oil at the correct level? (ï‚®P.437)
COROLLA_U7Maintenance and careThe OBD system determines
that a problem exists some-where in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle.
�When the battery is discon-
nected or discharged
Readiness codes that are set
during ordinary driving are erased.Also, depending on your driving habits, the readiness codes may not be completely set.
�When the fuel tank cap is
looseThe malfunction indicator lamp
comes on indicating a temporary malfunction and your vehicle may not pass the I/M test.
The error code in the OBD sys-
tem will not be cleared unless the vehicle is driven 40 or more times.
Contact your Toyota dealer to
prepare the vehicle for re-test-ing.Emission inspection
and mainte nance (I/M)
programs
Some states have vehicle
emission inspection pro-grams which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control sys-tem.
by yourself, be sure to fol-low the correct procedure as given in these sections.
Maintenance
Items Parts and tools
Battery
condition (P.442)•W a r m w a t e r• Baking soda•G r e a s e• Conventional
wrench (for terminal clamp bolts)
Brake fluid level (P.443)• FMVSS No.116
DOT 3 or SAE J1703 brake fluidFMVSS No.116 DOT 4 or SAE J1704 brake fluid
• Rag or paper towel• Funnel (used only
for adding brake fluid)Engine coolant level (P.440)• “Toyota Super Long
Life Coolant� or a similar high quality ethylene gly-col-based non-sili-cate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid tech-nologyFor the U.S.A.:“Toyota Super Long Life Coolant� is pre-mixed with 50% coolant and 50% deionized water.For Canada:“Toyota Super Long Life Coolant� is pre-mixed with 55% coolant and 45% deionized water.
COROLLA_U7Maintenance and careâ– Frontâ– RearPositioning a floor
jack
When using a floor jack, fol-
low the instructions in the manual provided with the jack and perform the opera-tion safely.When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury.
COROLLA_U7Maintenance and care�2.0 L 4-cylinder (M20A-FKS) engine
Washer fluid tank (ï‚® P.443)
Engine coolant reservoir ( ï‚®P.436)
Fuse boxes (ï‚® P.461)
Engine oil filler cap (ï‚® P.438)
Engine oil level dipstick ( ï‚®P.437)
Battery (ï‚® P.442)
Brake fluid reservoir ( ï‚®P.441)
Radiator (ï‚® P.440)
Condenser (ï‚® P.440)
Electric cooling fan
With the engine at operating
temperature and turned off, check the oil level on the dip-stick.â– Checking the engine oil
1Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bot-tom of the engine.Checking and adding the
if it is between the “FULL� and “LOW� lines on the reservoir when the engine is cold.
Reservoir cap
“FULL� line“LOW� line
If the level is on or below the “LOW�
line, add coolant up to the “FULL� line. (P.519)
â– Coolant selection
Only use “Toyota Super Long Life
Coolant� or a similar high quality
ethylene glycol based non-silicate,
non-amine, non-nitrite, and non-borate coolant with long-life
hybrid organic acid technology.
U.S.A.:
“Toyota Super Long Life Coolant� is
a mixture of 50% coolant and 50%
deionized water. (Minimum tem-
perature: -31°F [-35°C])
Canada:
“Toyota Super Long Life Coolant� is
a mixture of 55% coolant and 45%
deionized water. (Minimum tem-
perature: -44°F [-42°C])
For more details about coolant, con-
tact your Toyota dealer.â– If the coolant level drops within a short time of replenishing
Visually check the radiator, hoses, engine coolant reservoir caps, drain
cock and water pump.
If you cannot find a leak, have your
Toyota dealer test the cap and
check for leaks in the cooling sys-
tem.
Check the radiator and con-
denser and clear away any for-eign objects. If either of the above parts is extremely dirty or you are not sure of their condi-tion, have your vehicle inspected by your Toyota dealer.Checking the engine cool-
ant
WARNING
â– When the engine is hot
Do not remove the engine coolant
reservoir cap.
The cooling system may be under
pressure and may spray hot cool-ant if the cap is removed, causing
serious injuries, such as burns.
NOTICE
â– When adding coolant
Coolant is neither plain water nor straight antifreeze. The correct
mixture of water and antifreeze must be used to provide proper lubrication, corrosion protection
and cooling. Be sure to read the
antifreeze or coolant label.
â– If you spill coolant
Be sure to wash it off with water to prevent it from damaging parts or paint.
COROLLA_U7Maintenance and careetc., molded into the sidewall of
each tire.Replace the tires if the treadwear indicators are showing on a tire.
■When to replace your vehicle’s
tires
Tires should be replaced if:
â—�The treadwear indicators are showing on a tire
â—�You have tire damage such as cuts, splits, cracks deep enough to expose the fabric, and bulges
indicating internal damage
â—�A tire goes flat r epeatedly or can-
not be properly repaired due to the
size or location of a cut or other damage
If you are not sure, consult with your Toyota dealer.
â– Tire life
Any tire over 6 years old must be checked by a qualified technician
even if it has seldom or never been
used or damage i s not obvious.
â– Low profile tires (18-inch tires)
Generally, low prof ile tires will wear
more rapidly and t ire grip perfor-
mance will be reduced on snowy
and/or icy roads when compared to
standard tires. Be sure to use snow tires or tire chains on snowy and/or icy roads and drive carefully at a
speed appropriate for road and
weather conditions.
â– Maximum load of tire
Check that the maximum load of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings
(GAWR) of either the front axle or
the rear axle, whichever is greater.
For the GAWR, see the Certification
Label.For the maximum load of the tire,
see the load limit at maximum cold
tire inflation press ure mentioned on
the sidewall of the tire. ( ï‚®P.537)â– Tire types
â—�Summer tires
Summer tires are high-speed perfor-
mance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads. For driving on snow-covered roads or icy roads, the use of snow tires is recommended. When install-ing snow tires, be sure to replace all four tires.
â—�All season tires
All season tires are designed to pro-vide better traction in snow and to be adequate for driving in most win-ter conditions as well as for use
year-round. All se ason tires, how-
ever, do not have adequate traction performance compared with snow tires in heavy or loose snow. Also, all season tires fall short in accelera-tion and handling performance com-
pared with summer tires in highway driving.
â—�Snow tires
For driving on snow-covered roads or icy roads, we recommend using snow tires. If you need snow tires, select tires of the same size, con-struction and load capacity as the originally installed tires. Since your
vehicle has radial tires as original equipment, make sure your snow
tire life, Toyota recommends that tire rotation is c arried out at the
same interval as tire inspection.
Vehicles with a tire pressure warn-
ing system: Do not fail to initialize the tire pressure warning system after tire rotation.
Your vehicle is equipped with a
tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise.
If the tire pressure drops below
a predetermined level, the driver is warned by a warning light. (ï‚®P.485)
â– Routine tire inflation pressure
checks
The tire pressure warning system does not replace routine tire inflation
pressure checks. Make sure to check tire inflation pressure as part
of your routine of daily vehicle
checks.â– Situations in which the tire pressure warning system may
not operate properly
â—�In the following cases, the tire pressure warning system may not
operate properly.
• If non-genuine Toyota wheels are
used.
• A tire has been replaced with a
tire that is not an OE (Original
Equipment) tire.
• A tire has been replaced with a
tire that is not of the specified size.
• Tire chains, etc. are equipped.
• An auxiliary-support ed run-flat tire
is equipped.
• If a window tint that affects the
radio wave signals is installed.
• If there is a lot of snow or ice on
the vehicle, particularly around the wheels or wheel housings.
• If the tire inflation pressure is
extremely higher than the speci-fied level.
• If tires not equipped with tire pres-
sure warning valves and transmit-ters are used.
• If the ID code on the tire pressure
warning valves and transmitters is not registered in the tire pressure warning computer.
â—�Performance may be affected in the following situations.
• Near a TV tower, electric power
plant, gas station, radio station, large display, airpo rt or other facil-
ity that generates strong radio waves or electrical noise.
• When carrying a portable radio,
cellular phone, cordless phone or other wireless communication device.
â—�When the vehicle is parked, the time taken for the warning to start or go off could be extended.
â—�When tire inflation pressure declines rapidly for example when
COROLLA_U7Maintenance and care�For vehicles sold in Canada
When replacing tires or wheels,
tire pressure warning valves and transmitters must also be installed.
When new tire pressure warning
valves and transmitters are installed, new ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valves and transmitter ID codes registered by your Toy-ota dealer. ( ï‚®P.451)â– Replacing tires and wheels
If the ID code of the tire pressure
warning valve and tr ansmitter is not
registered, the tire pressure warning
system will not work properly. After
driving for about 20 minutes, the tire pressure warning light blinks for 1 minute and stays on to indicate a
system malfunction.
Installing tire pressure
warning valves and trans-mitters (vehicles with a
tire pressure warning sys-
tem)
NOTICE
â– Repairing or replacing tires,
wheels, tire pressure warn-
ing valves, transmitters and
tire valve caps
â—�When removing or fitting the wheels, tires or the tire pressure warning valves and transmit-
ters, contact your Toyota dealer
as the tire pressure warning valves and transmitters may be damaged if not handled cor-
COROLLA_U7Maintenance and caresure warning light blinks 3
times.
â– Initialization procedure
â—�Make sure to carry out initializa-
tion after adjusting the tire inflation
pressure.Also, make sure the tires are cold
before carrying out initialization or
tire inflation pressure adjustment.
â—�If you have accidentally turned the
engine switch off during initializa-tion, it is not necessary to press
the reset switch again as initializa-
tion will restart aut omatically when
the engine switch to ON for the
next time.
â—�If initialization has accidentally been started when it is not neces-
sary, adjust the tire inflation pres-sure to the specif ied level when
the tires are cold, and then per-form the initialization procedure again.
â– When initialization of the tire
pressure warning system has
failed
Initialization can be completed in a few minutes. However, in the follow-ing cases, the set tings have not
been recorded an d the system will
not operate properly. If repeated attempts to record tire inflation pres-sure settings are unsuccessful,
have the vehicle inspected by your
Toyota dealer.
â—�When attempting to start initializa-tion, the tire pressure warning light does not blink 3 times.â—�After driving for a certain period of time since the initialization has
been completed, the warning light
comes on after bl inking for 1 min-
ute.
The tire pressure warning valve
and transmitter is equipped with a unique ID code. When replac-ing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toy-ota dealer.
Your vehicle is equipped with
tire pressure warning system with the function to have ID codes registered for a second wheel set, for example a winter set, by Toyota dealer.
After registration of a second
wheel set, either of these two wheel sets can be selected for usage with the tire pressure warning system.WARNING
â– When initializing the tire pres-
sure warning system
Do not initialize the tire pressure warning system without first adjusting the tire inflation pres-sure to the specified level. Other-
wise, the tire pressure warning
light may not come on even if the
tire inflation press ure is low, or it
may come on when the tire infla-tion pressure is actually normal.
�This function will perform the change of wheel set only if a second wheel set has been registered. If no second wheel set has been registered, no change will be made when selecting this function in the menu.
�Only a change between both registered wheel set is possi-ble, mixing between these wheel sets is not supported.
â– How to change between wheel sets
1Have the vehicle fitted with the preferred wheel set.
2Press or of the meter
control switch to select .
3Press or to select
“Vehicle Settings� and then
press .
4Press or to select
“TPWS� and then press .
5Press or to select
“Change Wheel�. Then press
and hold until the tire pressure warning light blinks
slowly 3 times.
6Initialize the tire pressure warning system. ( ï‚®P.450)
COROLLA_U7Maintenance and careThe recommended cold tire
inflation pressure and tire size are displayed on the tire and loading information label. (ï‚®P.531)
Tire valveTire pressure gauge
1Remove the tire valve cap.
2Press the tip of the tire pres-sure gauge onto the tire valve.
3Read the pressure using the gauge gradations.
4If the tire inflation pressure is not at the recommended level, adjust the pressure.If you add too much air, press the center of the valve to deflate.
5After completing the tire infla-tion pressure measurement and adjustment, apply soapy water to the valve and check for leakage.
6Put the tire valve cap back on.
â– Tire inflation pressure check
interval
You should check ti re inflation pres-
sure every two week s, or at least
once a month. Do not forget to
check the spare.
â– Effects of incorrect tire inflation
pressure
Driving with incorrec t tire inflation
pressure may resul t in the following:
â—�Reduced fuel economy
â—�Reduced driving comfort and poor
handling
â—�Reduced tire life due to wear
â—�Reduced safety
â—�Damage to the drive train
If a tire needs frequent inflating, have it checked by your Toyota
Maintenance Guide� or “Owner’s Manual Supplement�.)
â– If air flow from the vents
decreases dramatically
The filter may be clogged. Check the filter and replace if necessary.*: If equipped
â– If the key battery is depleted
The following symptoms may occur:
â—�The smart key system (if equipped) and wireless remote
control will no t function properly.
â—�The operationa l range will be
reduced.
�Flathead screwdriver
�Small flathead screwdriver
�Lithium battery CR2032
â– Use a CR2032 lithium battery
â—�Batteries can be purchased at
your Toyota dealer, local electrical
appliance shops or camera stores.
â—�Replace only with the same or equivalent type recommended by the manufacturer.
â—�Dispose of used batteries accord-ing to local laws.NOTICE
â– When using the air condition-ing system
Make sure that a filter is always installed.Using the air conditioning system
without a filter may cause damage
to the system.
â– To prevent damage to the fil-ter cover
When moving the filter cover in the direction of arrow to release
the fitting, pay attention not to
apply excessive force to the claws. Otherwise, the claws may
be damaged.Wireless remote con-
trol/electronic key bat-tery
*
Replace the battery with a
new one if it is depleted.As the key may be damaged if the following procedure is not performed properly, it is recommended that key bat-tery replacement be per-formed by your Toyota dealer.
lights (vehicles without side turn signal lights)â– Rear
Back-up lights
Rear turn signal lights
Rear side marker lights (bulb
type)
â– Bulbs that need to be replaced by your Toyota dealer
�Headlights/daytime running lights
�Parking lights (vehicles with side turn signal lights)
�Front turn signal lights (vehi-cles with side turn signal lights)
�LED accent lights (if equipped)
�Side turn signal lights (if equipped)
�Tail lights
�Stop lights
�Rear side marker lights (LED type)
�High mounted stoplight
�License plate lightsLight bulbs
You may replace the follow-ing bulbs yourself. The diffi-culty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer.
For more information about replacing other light bulbs, contact your Toyota dealer.
COROLLA_U8When trouble arisesturning the engine switch to
ACC.
4Vehicles with a smart key system: To stop the engine, press and hold the engine switch for 2 consecutive sec-onds or more, or press it briefly 3 times or more in suc-cession.
5Stop the vehicle in a safe place by the road.
WARNING
â– If the engine has to be turned
off while driving
â—�Power assist for the brakes and steering wheel will be lost, mak-
ing the brake pedal harder to depress and the steering wheel
heavier to turn. Decelerate as
much as possible before turning off the engine.â—�Vehicles without a smart key
system: Never attempt to
remove the key, as doing so will lock the steering wheel.
�If the door can not be opened, open the window using the power window switch and exit the vehicle through the win-dow.
�If the window can not be opened using the power win-dow switch, remain calm, wait
until the water level inside the
vehicle rises to the point that the water pressure inside of the vehicle equals the water pressure outside of the vehi-cle, and then open the door and exit the vehicle.If the vehicle is
trapped in rising water
In the event the vehicle is
submerged in water, remain calm and perform the fol-lowing.WARNING
â– Using an emergency hammer*
for emergency escape
The front side windows and rear
side windows, as well as the rear
window can be shattered with an
emergency hammer* used for
emergency escape. However, an emergency hammer
* can not
shatter the windshi eld as it is lam-
inated glass.
*: Contact your Toyota dealer or
aftermarket accessory manu-
facturer for furt her information
about an emergency hammer.
â– Escaping the vehicle from the
window
There are cases where escaping the vehicle from the window is not
possible due to seating position,
passenger body type, etc. When using an emergency ham-
mer, consider your seat location
and the size of the window open-ing to ensure that the opening is
COROLLA_U8When trouble arisesIf you use chains or cables to tie
down your vehicle, the angles shaded in black must be 45°.
Do not overly tighten the tie
downs or the vehicle may be damaged.
If a tow truck is not available in
an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing eyelets. This should only be attempted on hard surfaced roads for at most
50 miles (80 km) at under 18
mph (30 km/h).A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drive train, axles, steering and brakes must be in good condition.
For vehicles with a continuously
variable transmission, only the front towing eyelets may be used.
1Take out the towing eyelet.
(ï‚®P.494, 504)
2Remove the eyelet cover using a flathead screwdriver.
messages according to operation conditions and vehicle specifica-
tions.
â– Warning buzzer
A buzzer may sound when a mes-sage is displayed.
The buzzer may not be audible if the vehicle is in a noisy location or if the
audio system volume is high.
■If “Engine Oil Level Low Add or
Replace� is displayed
The engine oil level is low. Check WARNING
Your vehicle has also been equipped with a TPMS (tire pres-sure warning system) malfunc-
tion indicator to indicate when the
system is not opera ting properly.
The TPMS (tire pressure warning
system) malfunction indicator is
combined with th e low tire pres-
sure telltale (tire pressure warning light). When the system detects a
malfunction, the telltale will flash
for approximately one minute and then remain continuously illumi-
nated. This sequence will con-
tinue upon subsequent vehicle start-ups as long as the malfunc-
tion exists. When the malfunction indicator is illu minated, the sys-
tem may not be able to detect or
signal low tire pressure as
intended.
TPMS (tire pressure warning sys-
tem) malfunctions may occur for a
variety of reasons, including the
installation of replacement or alternate tires or wheels on the
vehicle that prevent the TPMS
(tire pressure warning system) from functioning properly. Always
check the TPMS (tire pressure
warning system) malfunction tell-
tale after replacing one or more
tires or wheels on your vehicle to
ensure that the r eplacement or
alternate tires and wheels allow
the TPMS (tire pressure warning
system) to continue to function properly.
NOTICE
â– To ensure the tire pressure
warning system operates properly (vehicles with a tire
pressure warning system)
Do not install tires with different specifications or makers, as the
tire pressure warning system may not operate properly.If a warning message
is displayed
The multi-information dis-
play shows warnings for system malfunctions and incorrectly performed oper-ations, and messages that indicate a need for mainte-nance. When a message is displayed, perform the appropriate corrective action for the message.
If a warning message is dis-played again after the appropriate actions have been performed, contact your Toyota dealer.
Additionally, if a warning light comes on or flashes at
the same time that a warn-
ing message is displayed, take the appropriate correc-tive action for the warning light. (ï‚®P.481)
�Shift the shift lever to P (con-tinuously variable transmis-sion) or N (manual transmission).
�Stop the engine.
�Turn on the emergency flash-ers.
�Check the degree of the tire damage.
A tire should only be repaired with the emergency tire punc-ture repair kit if the damage is caused by a nail or screw pass-ing through the tire tread.• Do not remove the nail or
screw from the tire. Removing the object may widen the opening and make emer-gency repair with the repair kit impossible.
• To avoid sealant leakage,
move the vehicle until the area of the puncture, if known, is positioned at the top of the tire.
â– A flat tire that cannot be
repaired with the emergency tire puncture repair kit
In the following cases, the tire can-not be repaired with the emergency
tire puncture repair kit. Contact your
Toyota dealer.If you have a flat tire
(vehicles without spare tire)
Your vehicle is not equipped
with a spare tire, but instead is equipped with an emer-gency tire puncture repair kit.
A puncture caused by a nail or screw passing through the tire tread can be repaired temporarily using the emergency tire puncture repair kit. (The kit contains a bottle of sealant. The seal-ant can be used only once to temporarily repair one tire without removing the nail or screw from the tire.) After temporarily repairing the tire with the kit, have the tire repaired or replaced by your Toyota dealer.
WARNING
â– If you have a flat tire
Do not continue driving with a flat
tire.Driving even a short distance with
a flat tire can damage the tire and
the wheel beyond repair, which could result in an accident.
specified air pressure is reached. Drive for about 3 miles (5 km) and then per-form step 20.
23Attach the air release cap to
the end of the hose.
If the air release cap is not
attached, the sealant may leak and
the vehicle ma y get dirty.
24Store the bottle in the trunk
while it is connected to the
compressor.
25Taking precautions to avoid
sudden braking, sudden acceleration and sharp turns, drive carefully at under 50 mph (80 km/h) to the nearest Toyota dealer that is less than 62 miles (100 km) away for tire repair or replacement.
When having the tire repaired or
replaced, make sure to tell the Toy-
ota dealer that the sealant is injected.
â– If the tire is i nflated to more
than the specified air pressure
1Disconnect the hose from the valve.2Install the air release cap to the end of the hose and push the
protrusion on the air release cap into the tire valve to let some air out.
3Disconnect the hose from the valve, remove the air release cap
from the hose an d then recon-
nect the hose.
4Turn the compressor switch on
and wait for seve ral seconds,
and then turn it off. Check that the air pressure indicator shows the specified air pressure.
(ï‚®P.531)
If the air pressure is under the des-
ignated pressure, turn the compres-sor switch on again and repeat the inflation procedure until the speci-
fied air pressure is reached.
â– The valve of a tire that has been
repaired (vehicles without a tire pressure warning system)
After a tire is repaired with the emer-gency tire puncture repair kit, the
valve should be replaced.
â– After a tire is re paired with the
emergency tire puncture repair
kit (vehicles with a tire pressure
warning system)
â—�The tire pressure warning valve and transmitter should be
replaced.
â—�Even if the tire inflation pressure is at the recommended level, the tire pressure warning light may come on/flash.
The engine starting system may be malfunctioning due to an electrical problem such as elec-tronic key battery depletion or a blown fuse. However, an interim measure is available to start the engine. ( ï‚®P.512)
One of the following may be the cause of the problem:
�The battery may be dis-
charged. (ï‚® P.515)
�One or both of the battery ter-minals may be disconnected. (P.442)
�There may be a malfunction in the steering lock system.
Contact your Toyot a dealer if the
problem cannot be repaired, or if
repair procedures are unknown.When the engine does not start,
the following steps can be used as an interim measure to start the engine if the engine switch is functioning normally.Do not use this starting proce-dure except in case of emer-gency.
1Set the parking brake.
(ï‚®P.163, 164)
2Check that the shift lever is in P (continuously variable transmission) or N (manual transmission).
3Turn the engine switch to ACC.
4Press and hold the engine switch for about 15 seconds while depressing the brake pedal (continuously variable transmission) or clutch pedal (manual transmission) firmly.
Even if the engi ne can be started
using the above steps, the system
may be malfunctioning. Have the vehicle inspected by your Toyota dealer.The starter motor does not turn over (vehicles
with a smart key system)
The starter motor does not turn over, the interior lights and headlights do
COROLLA_U8When trouble arisesâ– When the electronic key does
not work properly
â—�Make sure that the smart key sys-tem has not been deactivated in the customization setting. If it is
off, turn the functi on on. (Custom-
izable features: ï‚®P.548)
â—�Check if battery-saving mode is
set. If it is set, cancel the function. (ï‚®P.113)
Use the mechanical key
(ï‚®P.100) in order to perform the If you lose your keys
New genuine keys can be made by your Toyota dealer using the other key (vehi-cles without a smart key system) or mechanical key (vehicles with a smart key system) and the key number stamped on your key num-ber plate.
Keep the plate in a safe place such as your wallet, not in the vehicle.
NOTICE
â– When an electronic key is lost
(vehicles with a smart key
system)
If the electronic key remains lost, the risk of vehicle theft increases
significantly. Visit your Toyota
dealer immediately with all remaining electronic keys that
were provided wit h your vehicle.If the electronic key
does not operate prop-erly (vehicles with a
smart key system)
If communication between
the electronic key and vehi-cle is interrupted (ï‚® P.113)
or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote control cannot be used. In such cases, the doors can be opened and the engine can be started by following the procedure below.
NOTICE
â– In case of a smart key system
malfunction or other
key-related problems
Take your vehicle with all the elec-tronic keys provided with your vehicle to your Toyota dealer.
COROLLA_U8When trouble arises1Stop the engine. Set the
parking brake and shift the shift lever to P (continuously variable transmission) or N (manual transmission).
2Remove the mud, snow or sand from around the front wheels.
3Place wood, stones or some other material under the front wheels to help provide trac-tion.
4Restart the engine.
5Shift the shift lever to D or R (continuously variable trans-mission) or 1 or R (manual transmission) and release the parking brake. Then, while exercising caution, depress the accelerator pedal.
â– When it is difficult to free the
vehicle
Press the switch to turn off
TRAC.WARNING
â—�If steam is seen coming from
under the hood, do not open the
hood until the steam has sub-
sided. The engine compart-
ment may be very hot.
â—�Keep hands and clothing (espe-cially a tie, a scarf or a muffler)
away from the fan and belts.
Failure to do so m ay cause the
hands or clothing to be caught, resulting in serious injury.
â—�Do not loosen the coolant reser-
voir cap while the engine and
radiator are hot.High temperature steam or
coolant could spray out.
NOTICE
â– When adding engine coolant
Add coolant slowly after the
engine has cooled down suffi-
ciently. Adding cool coolant to a
hot engine too quickly can cause damage to the engine.
â– To prevent damage to the cooling system
Observe the following precau-tions:
â—�Avoid contaminating the coolant
with foreign matter (such as
sand or dust etc.).
â—�Do not use any coolant additive.If the vehicle becomes
stuck
Carry out the following pro-
cedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow:
The vehicle identification num-ber (VIN) is the legal identifier for your vehicle. This is the pri-mary identification number for your Toyota. It is used in regis-tering the ownership of your vehicle.
This number is stamped under
the right-hand front seat.This number is also stamped on the top left of the instrument panel.Maintenance data (fuel, oil level, etc.)
changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
â– Engine oil selection
“Toyota Genuine Motor Oil� is
used in your Toyota vehicle. Use Toyota approved “Toyota Genu-ine Motor Oil� or equivalent to satisfy the following grade and viscosity.
Oil grade: ILSAC GF-5 multi-
grade engine oil
Recommended viscosity: SAE
0W-20
SAE 0W-20 is the best choice
for good fuel economy and good starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
Recommended viscosity (SAE):
Outside temperature
Oil viscosity (0W-20 is explained
here as an example):• The 0W in 0W-20 indicates
the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather.
• The 20 in 0W-20 indicates the
viscosity characteristic of the oil when the oil is at high tem-perature. An oil with a higher viscosity (one with a higher Fuel
Fuel type Unleaded gasoline only
Octane Rating87 (Research Octane Number 91) or
higher
Fuel tank capacity(Reference)13.2 gal. (50.0 L, 11.0 Imp. gal.)
COROLLA_U9Vehicle specificationsvalue) may be better suited if
the vehicle is operated at high speeds, or under extreme load conditions.
How to read oil container label:
The International Lubricant
Specification Advisory Commit-tee (ILSAC) Certification Mark is added to some oil containers to help you select the oil you should use.
â– Oil capacity (Drain and refill
[Reference*])
*: The engine oil capacity is a refer-
ence quantity to be used when
changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
â– Engine oil selection
“Toyota Genuine Motor Oil� is used in your Toyota vehicle. Use
Toyota approved “Toyota Genu-ine Motor Oil� or equivalent to satisfy the following grade and viscosity.
Oil grade: API SN/RC multi-
grade engine oil
Recommended viscosity: SAE
0W-16
Outside temperature
SAE 0W-16 is the best choice for good fuel economy and good starting in cold weather.
If SAE 0W-16 is not available,
SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change.
Oil viscosity (0W-16 is explained
here as an example):• The 0W in 0W-16 indicates
the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather.
• The 16 in 0W-16 indicates the
viscosity characteristic of the oil when the oil is at high tem-perature. An oil with a higher Lubrication system (2.0 L
brand of gasoline. If this does not correct the problem, consult your
Toyota dealer.
â– Recommendation of the use of
gasoline containing detergent additives
â—�Toyota recomme nds the use of
gasoline that contains detergent additives to avoid the build-up of
engine deposits.
â—�All gasoline sold in the U.S.A. con-tains minimum detergent additives
to clean and/or keep clean intake systems, per EPA’s lowest addi-
tives concentration program.
â—�Toyota strongly recommends the use of Top Tier Detergent Gaso-
line. For more information on Top Tier Detergent Gasoline and a list
of marketers, please go to the offi-
cial website www.toptiergas.com.â– Recommendation of the use of low emissions gasoline
Gasolines containing oxygenates such as ethers and ethanol, as well
as reformulated gasolines, are avail-
able in some cities. These fuels are typically acceptable for use, provid-
ing they meet other fuel require-
ments.
Toyota recommends these fuels,
since the formulations allow for reduced vehicle emissions.
â– Non-recommendation of the
use of blended gasoline
â—�Use only gasoline containing up to 15% ethanol.
DO NOT use any flex-fuel or gas-oline that could contain more than
15% ethanol, including from any
pump labeled E30 (30% ethanol
[ ]), E50 (50% ethanol [ ]), E85
(85% ethanol [ ]) (which are only
some examples of f uel containing
more than 15% ethanol).
â—�If you use gasohol in your vehicle, be sure that it has an octane rat-
ing no lower than 87.
â—�Toyota does not recommend the use of gasoline containing metha-
nol.
â– Non-recommendation of the use of gasoline containing MMT
Some gasoline contains an octane enhancing additive called MMT
(Methylcyclopentadienyl Manga-
nese Tricarbonyl).
Toyota does not re commend the use
of gasoline that contains MMT. If
fuel containing MMT is used, your
emission control system may be Fuel information
You must only use unleaded
gasoline.Select octane rating of 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knock-ing. Persistent knocking can lead to engine damage.
At minimum, the gasoline you use should meet the specifica-tions of ASTM D4814 in the U.S.A.
pared in accordance with regu-lations issued by the National Highway Traffic Safety Adminis-
tration of the U.S. Department of
Transportation.
It provides the purchasers
and/or prospective purchasers of Toyota vehicles with informa-tion on uniform tire quality grad-ing.
Your Toyota dealer will help answer
any questions you may have as you read this information.
â– DOT quality grades
All passenger vehicle tires must
conform to Federal Safety Requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
For example: Treadwear 200 Trac-
tion AA Temperature A
â– Treadwear
The treadwear grade is a com-
parative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course.
For example, a tire graded 150 Tire section namesUniform Tire Quality
COROLLA_U9Vehicle specificationswould wear one and a half (1 - 1/2)
times as well on the government course as a tire graded 100.The relative perfo rmance of tires
depends upon the actual conditions of their use. Performance may differ significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate.
â– Traction AA, A, B, C
The traction grades, from high-
est to lowest, are AA, A, B and C, and they represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified govern-ment test surfaces of asphalt and concrete.
A tire marked C may have poor
traction performance.
Warning: The traction grade
assigned to this tire is based on braking (straight ahead) traction tests and does not include corner-ing (turning) traction.
â– Temperature A, B, C
The temperature grades are A (the highest), B, and C, repre-
senting the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled condi-tions on a specified indoor labo-ratory test wheel.
Sustained high temperature can
cause the material of the tire to
degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Grade C corresponds to a level of
performance which all passenger car tires must meet under the Fed-eral Motor Vehicle Safety Standard No. 109.
Grades B and A represent higher
levels of performance on the labo-ratory test wheel than the minimum required by law.
Warning: The temperature grades
of a tire assume tha t it is properly
inflated and not overloaded.
Excessive speed, underinflation, or
excessive loading, either sepa-rately or in combination, can cause heat buildup and possible tire fail-ure.
Glossary of tire terminology
Tire related term Meaning
Cold tire infl ation pressureTire pressure when the vehicle has been parked for three hours or more, or has not
been driven more than 1 mile or 1.5 km
under that condition
Maximum inflation pressureThe maximum cold inf lated pressure to
which a tire may be inflated, shown on the sidewall of the tire
sureCold tire inflation pressure recommended by a manufacturer
Accessory weightThe combined weight (in excess of those
standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power seats, radio and heater, to the extent that these items are available as fac-tory-installed equipment (whether installed or not)
Curb weightThe weight of a motor vehicle with stan-dard equipment, including the maximum capacity of fuel, oil and coolant, and if so equipped, air conditioning and additional weight optional engine
Maximum loaded vehicle weightThe sum of:
(a) Curb weight
(b) Accessory weight(c) Vehicle capacity weight
(d) Production options weight
Normal occupant weight150 lb. (68 kg) times the number of occu-
pants specified in the second column of
Table 1* that follows
Occupant distributionDistribution of occupan ts in a vehicle as
specified in the thi rd column of Table 1*
below
Production options weightThe combined weight o f installed regular
production options weighing over 5 lb. (2.3
kg) in excess of the s tandard items which
they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim
RimA metal support for a tire or a tire and tube assembly upon which the tire beads are seatedTire related term Meaning
Rim type designationThe industry manufacturer’s designation for a rim by style or code
Rim width Nominal distance be tween rim flanges
Vehicle capacity weight (Total load capacity)The rated cargo and luggage load plus 150 lb. (68 kg) times the vehicle’s designated seating capacity
Vehicle maximum load on the tireThe load on an individual tire that is deter-mined by distributing to each axle its share of the maximum loaded vehicle weight, and dividing by two
Vehicle normal load on the tireThe load on an individual tire that is deter-mined by distributing to each axle its share of curb weight, accessory weight, and nor-mal occupant weight (distributed in accor-
dance with Table 1
* below), and dividing by
two
Weather sideThe surface area of the rim not covered by
the inflated tire
BeadThe part of the tire that is made of steel wires, wrapped or rein forced by ply cords
and that is shaped to fit the rim
Bead separationA breakdown of the bond between compo-nents in the bead
Bias ply tireA pneumatic tire in which the ply cords that extend to the beads are laid at alternate angles substantially l ess than 90 degrees
to the centerlin e of the tread
CarcassThe tire structure, ex cept tread and side-
wall rubber which, when inflated, bears the load
ChunkingThe breaking away of pieces of the tread or sidewall
Cord The strands forming the plies in the tireTire related term Meaning
COROLLA_UCord separationThe parting of cords f rom adjacent rubber
compounds
CrackingAny parting within the tread, sidewall, or
innerliner of the ti re extending to cord
material
CTA pneumatic tire with an inverted flange tire and rim system i n which the rim is
designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of the rim in a manner that encloses the rim flanges inside the air cav-ity of the tire
Extra load tireA tire designed to operate at higher loads and at higher inflation pressures than the corresponding standard tire
Groove The space between two adjacent tread ribs
InnerlinerThe layer(s) forming th e inside surface of a
tubeless tire that contains the inflating medium within the tire
Innerliner separationThe parting of the innerliner from cord material in the carcass
Intended outboard sidewall(a) The sidewall that contains a whitewall, bears white lettering, or bears manufac-turer, brand, and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an
asymmetrical tire that has a particular side that must always fa ce outward when
mounted on a vehicle
Light truck (LT) tireA tire designated by i ts manufacturer as
primarily intended for use on lightweight trucks or multipurpose passenger vehicles
Load ratingThe maximum load that a tire is rated to
carry for a given inflation pressure
Maximum load ratingThe load rating for a tire at the maximum
permissible inflation pressure for that tireTire related term Meaning
COROLLA_U*: Table 1 -Occupant loading and di stribution for vehicle normal load for var-
ious designated seating capacitiesSidewall separationThe parting of the rubber compound from
the cord materia l in the sidewall
Snow tireA tire that attains a traction index equal to or greater than 110, compared to the ASTM E-1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Single Wheel Driving Trac-tion in a Straight Line on Snow-and Ice-Covered Surfaces, and which is
marked with an Alpine Symbol ( ) on at
least one sidewall
Test rimThe rim on which a tire is fitted for testing,
and may be any rim lis ted as appropriate
for use with that tire
TreadThat portion of a tire that comes into con-
tact with the road
Tread ribA tread section running circumferentially
around a tire
Tread separationPulling away of the tread from the tire car-
cass
Treadwear indicators (TWI)The projections wit hin the principal
grooves designed to g ive a visual indica-
tion of the degrees of wear of the tread
Wheel-holding fixtureThe fixture used to hol d the wheel and tire
assembly securely during testingTire related term Meaning
3Select “General� or “Vehicle� on the “Setup� screen.
Various setting can be changed.
Refer to the list o f settings that can
be changed for details.
â– Changing by using the
meter control switches
1Press or of the meter
control switch to select .2Press or of the meter
control switch to select the
desired item to be custom-ized.
3Press or press and hold .
The available settings will differ
depending on if is pressed or
pressed and held. Follow the
instructions on the display.
Some function settings are changed simultaneously with other func-
tions being customized. Contact y our Toyota dealer for further
details.
Settings that can be changed using the audio system screen
Settings that can be changed using the meter control switchesCustomizable features
Your vehicle includes a vari-
ety of electronic features that can be personalized to suit your preferences. The settings of these features can be changed using the multi-information display, the audio system screen, or at your Toyota dealer.
Customizing vehicle fea-
tures
WARNING
â– During customization
As the engine needs to be run-
ning during customization, ensure that the vehicle is parked in a
place with adequate ventilation. In
a closed area such as a garage, exhaust gases in cluding harmful
carbon monoxide (CO) may col-lect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
â– During customization
To prevent batte ry discharge,
ensure that the engine is running while customizing features.
has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notify-ing Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331).
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy cam-paign. However, NHTSA can-not become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov ; or
write to: Administrator, NHTSA, 1200 New Jersey Ave, S.E., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov .Seat belt instructions
for Canadian owners (in French)
The following is a French
explanation of seat belt instructions extracted from the seat belt section in this manual.
See the seat belt section for more detailed seat belt instructions in English.
mission: Did you press the engine switch while firmly depressing the brake pedal? (ï‚®P.148)
�Manual transmission: Did you press the engine switch while firmly depressing the clutch pedal? ( P.148)
�Continuously variable trans-mission: Is the shift lever in P? (P.148)
�Is the electronic key any-where detectable inside the vehicle? ( P.112)
�Is the steering wheel unlocked? ( P.149)
�Is the electronic key battery weak or depleted?
In this case, the engine can be
started in a temporary way. (ï‚®
P.514 )
�Is the battery discharged?
(ï‚®P.515)
�Is the engine switch in ON?If you cannot release the shift lever
by depressing the brake pedal with
the engine switch in ON. ( ï‚®P.154 )
�Vehicles without a smart key
system: It is locked to prevent theft of the vehicle if the key is pulled from the engine switch. (ï‚®P.147)
�Vehicles with a smart key sys-tem: It is locked automatically to prevent theft of the vehicle. (P.149)
�Is the window lock switch pressed?
The power window except for the
one at the driver’s seat cannot be operated if the window lock switch is pressed. ( 
P.129 )
�The auto power off function
will be operated if the vehicle is left in ACC or ON (the engine is not running) for a period of time. ( ï‚®P.151)The engine does not start
(vehicles with a smart key
system)
The shift lever cannot be
shifted from P even if you depress the brake pedal (continuously variable transmission)The steering wheel can-not be turned after the engine is stopped
other types of warning buzzer may also sound. (ï‚® P.481, 490)
�Did anyone inside the vehicle open a door during setting the alarm?
The sensor detects it and the alarm
sounds. ( ï‚®P.69 )
Do one of the following to deac-
tivate or stop the alarms:
�Unlock the doors.
�Turn the engine switch to
ACC or ON, or start the engine. (The alarm will be deactivated or stopped after a
few seconds.)
�Is the electronic key left inside
the vehicle?
Check the message on the
multi-information display. ( P.490 )�When a warning light turns on
or a warning message is dis-played, refer to P.481, 490.
�Vehicles with an emergency tire puncture repair kit: Stop the vehicle in a safe place and repair the flat tire temporarily with the emergency tire punc-ture repair kit. ( P.493)
�Vehicles with a spare tire: Stop the vehicle in a safe place and replace the flat tire with the spare tire. ( P.503)
�Try the procedure for when the vehicle becomes stuck in mud, dirt, or snow. ( P.521)An alarm is activated and
the horn sounds (vehicles with an alarm)
A warning buzzer sounds
when leaving the vehicle (vehicles with a smart key system)A warning light turns on or a warning message is
Audio source ........................303Operating information...........324Reordering the audio source 303Screen adjustment ...............305Some basics.........................303Sound settings......................304Turning the sys tem on and off
...........................................303
USB/AUX port ......................304Voice command system .......306
M mode ................................158Paddle shift switches....157, 158
Cooling system ......................440
Engine overheating ..............519Cruise control
Dynamic radar cruise control223Dynamic radar cruise control
with full-speed range ..........213
Cup holders.............................401Current fuel consumption........88Curtain shield airbags..............29Customizable featu res ...........548
If a warning buzzer sounds ..481If a warning light turns on .....481If a warning message is dis-
played.................................490
If the battery is d ischarged ...515
If the electronic key does not
operate properly .................513
If the engine will not start......511If the vehicle is trapped in rising
water...................................474
If you have a flat tire .....493, 503If you lose your keys.............513If you think something is wrong
...........................................479
If your vehicle becomes stuck
...........................................521
If your vehicle has to be stopped
in an emergency.................472
If your vehicle needs to be towed
...........................................475
If your vehicle ove rheats ......519
Enform App Suite button (Setup
screen)...................................266
Engine
ACCESSORY mode . ............151
Compartment........................436Engine switch ...............147, 148Fuel pump shut off system ...480Hood.....................................434How to start the engine 147, 148Identification number ............525If the engine will not start......511If your vehicle has to be stopped
Electronic key.........................96Engine switch ...............147, 148If the electronic key does not
operate properly.................513
If you lose your keys ............513Key number plate ...................96Keyless entry................ 103, 111Mechanical key ......................96Replacing the battery ...........458Warning buzzer .................... 112Wireless remote control .........98
Contacts/Call history settings362Message settings .................368Notifications settings ............361Sounds settings....................360
Placing a call u sing the Blue-
tooth
® hands-free system ...350
By call history .......................350By contacts list .....................351By favorites list .....................350By home screen ...................352By keypad.............................352
Power outlet............................405Power steering (Electric power
steering system)...................251
Warning light.........................484
POWER VOLUME knob..........303Power windows
Door lock linked window opera-
tion......................................128
Jam protection function ........127Operation..............................127Window lock switch ..............129
ABS ......................................483Airbags .................................482Approach warning ........219, 229Brake hold ............................487Brake Override System ........483Brake system........................481Charging system ..................482Downshifting.........................159Drive-Start Control ................483
Electric power steering .........484Engine ..................................482High coolant temperature .....481Key reminder ........................148LDA (Lane Departure Alert with
Battery-Saving Function .......112Locking/Unlocking ..................98Replacing the battery ...........458
For vehicles with Entune
Audio Plus or Entune Pre-mium Audio, refer to “NAVIGATION AND MUL-TIMEDIA SYSTEM OWNER’S MANUAL� for information regarding the equipment listed below.
)�”}”(h}”(hNh}”hŒ-data\dodge-challenger-auto-body-repair-before”shXJThe image depicts a bright green car with significant front-end damage. It appears to be in a garage or repair shop, and the car's hood is partially opened. The left front area is crumpled, indicating it may have been involved in a collision. There are various tools and items in the background, typical of a workshop environment.”hh uh�”(hh�h}”ubŒ!831ee7596d0645cd8c9e096ac90f10c50”h
)�”}”(h}”(hNh}”(h¤Œ@./data\How to change engine oil and filter on TOYOTA Corolla.txt”h¦KuhX¼How to change engine oil
The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable”hh uh�”(hh�h}”ubŒ!831ee7596d0645cd8c9e096ac90f10c55”h
)�”}”(h}”(hNh}”(h¤j^h¦KuhXófor any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot
replace advice from specialists.
AUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe
the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of
TOYOTA Corolla IX Hatchback (E120) 1.6 VVT-i (ZZE121_), TOYOTA Corolla IX
Hatchback (E120) 1.8 VVTi (ZZE122), TOYOTA Corolla IX Hatchback (E120) 1.8 4WD, TOYOTA Corolla IX Hatchback (E120) 1.8 (ZZE122_), TOYOTA Corolla IX Hatchback
(E120) 1.5 VVT-i (NZE121_)
The steps may slightly vary depending on the car design.
Important!
This tutorial was created based on the replacement procedure for a similar car part
on: TOYOTA Prius II Liftback (XW20) 1.5 Hybrid (NHW2_)
Install the brake caliper and fix it. Use a drive socket #13. Use a torque wrench. Tighten it to 35 Nm torque.”hh uh�”(hh�h}”ubŒ!ea2cf4e23689435092337e9f7893369c4”h
The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable
for any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot”hh uh�”(hh�h}”ubŒ!ea2cf4e23689435092337e9f7893369c6”h
)�”}”(h}”(hNh}”(h¤j�h¦KuhX¸replace advice from specialists.
AUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe
the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of
The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable for any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot replace advice from specialists.”hh uh�”(hh�h}”ubŒ!b51984d12cb145cb9746aca78604ce2b5”h
)�”}”(h}”(hNh}”(h¤jÈh¦KuhXiAUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of road safety.
)�”}”(h}”(hNh}”(h¤jùh¦KuhXÑThis tutorial was created based on the replacement procedure for a similar car part on: TOYOTA RAV 4 III (ACA3_, ACE_, ALA3_, GSA3_, ZSA3_) 2.4 (ACA33)
Unscrew the ignition coil bracket. Use a drive socket #10.
7
Remove the fastening bolts.
8
Take out the ignition coil from the spark plug well.
Remember the sequence of steps for ignition coil demounting.
Replacement: spark plugs – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_).
Tip:
9 Clean dirt, dust and debris from inside the spark plug wells.
10
11
Take out the spark plugs.
12
10
11
Take out the spark plugs.
12Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease.
13 Install the new spark plugs into their mounting seats.
14
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25
)�”}”(h}”(hNh}”(h¤jùh¦KuhX/The document contains only general recommendations that may be useful for you when you perform repair or replacement work. AUTODOC shall not be liable for any loss, injury, damage of property occurring in the repair or replacement process due to incorrect use or misinterpretation of the provided information.
AUTODOC shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for information purposes only and cannot replace advice from specialists.
AUTODOC shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AUTODOC strongly recommends to be careful and observe the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guarantee you the appropriate level of road safety.”hh uh�”(hh�h}”ubŒ!7bc00aeaec514037aab955ac20e143729”h
)�”}”(h}”(hNh}”hŒ*data\hyundai-sonata-auto-body-repair-after”shŒéThe image shows a black Hyundai car, specifically a model that resembles the Hyundai Sonata. It appears to be parked on a gravel surface with other vehicles in the background. The weather looks overcast, suggesting cloudy conditions.”hh uh�”(hh�h}”ubŒ!9a42e1cb1883421e934ff04f0cdb568f0”h
)�”}”(h}”(hNh}”hŒ+data\hyundai-sonata-auto-body-repair-before”shX/The image appears to show a dark-colored car with visible damage on the driver's side. The damage seems to be a dent and scratches along the side of the vehicle, particularly on the rear wheel area. The car is parked in a garage or indoor space, with another vehicle partially visible in the background.”hh uh�”(hh�h}”ubŒ!8c9973a7779747d986e4476ffc2a15e90”h
)�”}”(h}”(hNh}”hŒdata\IMG_1436”shŒAccidented car Before repair
)�”}”(h}”(hNh}”hŒdata\IMG_1437”shX_The image shows a black Toyota vehicle, which appears to be a pickup truck, parked among other vehicles. The caption indicates that it is an "Accidented car: after repair," suggesting that it has been in an accident but has since been repaired. The setting looks like a parking lot or a car dealership environment with a fenced area in the background.”hh uh�”(hh�h}”ubŒ!6a9295089d704def89d8996c43bd5bd80”h
)�”}”(h}”(hNh}”hŒ(data\pontiac-vibe-auto-body-repair-after”shX&The image shows a front view of a dark gray Pontiac car, featuring a distinctive grille with the Pontiac emblem. The car appears to be parked in a lot, with another vehicle visible in the background. The overall condition of the car looks good, and the lighting suggests it may be a cloudy day.”hh uh�”(hh�h}”ubŒ!ccc1a2a2bedd428eaf0a227cb052c3c20”h
)�”}”(h}”(hNh}”hŒ)data\pontiac-vibe-auto-body-repair-before”shX>The image shows the front of a car that has sustained damage. The front grille is visible, along with a cracked or broken bumper on one side. Some components behind the grille and bumper appear exposed, and there is a visible hose or ducting. The damage suggests that the vehicle may have been involved in an accident.”hh uh�”(hh�h}”ubŒ!93a34ea4bb1d47fe94ec3d3990f5e49c0”h
)�”}”(h}”(hNh}”(hŒtest_rec”hŒ0-3 minutes”uhXÙ hello everyone so i'm timothy i'm doing this recording to talk about something i need about cars okay let's say very correct okay so what is a car the guy is a mechanical object designed to transport people from one location to the other so that's like how i would define a car for you right okay so what do i need about a car how do i fix something I kind of know little and that little is a much on its own right I have very good understanding of like service is very cool, a car, you know changing the oil, removing the oil filter, changing the oil filter like that like that right so I think um yeah yeah yeah yeah so what else you don't see what else should I say? alright this is good it's good enough yeah thanks bye stop”hh uh�”(hh�h}”ubŒ!00b58e4a55b44a11add00384c789a3e30”h
)�”}”(h}”(hNh}”hŒ)data\toyota-tacoma-auto-body-repair-after”shXThe image features a black Toyota Tacoma truck parked in a lot. The truck is positioned in the foreground, showing its front grille and headlights. In the background, there is a gray Jeep vehicle to the right. The setting appears to be an outdoor area with a fence in the background.”hh uh�”(hh�h}”ubŒ!1e7d44cec5c548d8a513bc228a7cf9a30”h
)�”}”(h}”(hNh}”hŒ*data\toyota-tacoma-auto-body-repair-before”shX¾The image depicts a black Toyota truck that has sustained significant damage. The front of the vehicle appears to be heavily impacted, with the hood crumpled and the front grille damaged. The driver's side mirror is also broken. There are markings (green X's) on the damaged areas, which are often used for assessment and repair purposes. The backdrop includes additional vehicles and a fence, suggesting the truck is in a repair or salvage yard.”hh uh�”(hh�h}”ubusb}”(KhKhKh'Kh1Kh;KhEKhOKhYKhcK hmK
